Sharif Digital Repository

Research projects in urban transportation systems require proper simulation softwares. Such softwares are the basic requirements of any kind of study in electrical transportation systems. Due to high energy consumption of these systems, studies for its optimization are challenging and necessary. In this paper an optimized timetable of trains? movement is proposed in order to completely utilize the regenerative energy of trains? braking in stations. A sample subway system is simulated and Genetic algorithm is used as an optimization method. The effect of headway and reserve times on the amount of energy consumption is studied and an optimized reserve time set is found for the sample system.... 

A great amount of effort has been made in order to reach a more precise understanding of the adhesion phenomenon that happens as a vital component of several biological systems. Therefore, a firm understanding of the important factors that influence this phenomenon is of special importance in triggering the adhesive characteristics of different biological, bio-inspired and synthetic materials in fields such as tissue engineering. In this study the adhesive characteristics of a multi-material system consisting of the frequently used synthetic material, graphene, in the form of armchair-configuration sheets, and an important biological filament which is type 1 Collagen consisting of 3 alpha... 

Power transformer monitoring as a reliable tool for maintaining purposes of this valuable asset of power systems has always comprised partial discharge offline measurements and online monitoring. The reason lies in non-destructive feature of PD monitoring. Partial discharge monitoring helps to detect incipient insulation faults and prevent insulation failure of power transformers. This paper introduces a software package developed based on structural data of power transformer and discusses the results of the simulation on Abetti winding, which might be considered as a basic layer winding. A hybrid model is used to model the transformer winding, which has been developed by first author.... 

The neutron velocity selector is a device used to produce a monochromatic neutron beam with continuous flux. The purpose of the present study is to investigate the sensitivity of the transmission factor and resolution of a multiblade neutron velocity selector to the various parameters using the McStas software. To this end, two instruments were created using the Arm, Progress_bar, Source_simple, DivMonitor, L_monitor, Guide_channeled and V_selector components of the McStas software. The used V_selector component to simulate the multiblade neutron velocity selector was created by considering three assumptions: 1. The absorption of colliding neutrons to selector blades, 2. No interaction of... 

COMSOL Multiphysics is a comprehensive simulation software environment for a wide range of applications. COMSOL has an interactive interface that facilitates the modeling procedure and allows an easy coupling of different physical processes. The Subsurface Flow module extends the COMSOL modeling environment to applications related to fluid flow in saturated and variably saturated porous media. COMSOL is increasingly used in the investigation of geophysical, hydrogeological and environmental phenomena. The main goal of this work is to explore the ability of COMSOL for simulating seawater intrusion (SWI) in fractured coastal aquifers. Numerical modeling of such a problem is of high interest as... 

Effects of sprue base size and design on flow pattern during aluminum gravity casting have been investigated by employing different sprue base sizes and using computational fluid dynamics (CFD). Calculations was carried out using SUTCAST simulation software based on solving Navier-Stokes equation and tracing the free surface using SOLA-VOF algorithm. Flow pattern was analyzed with focusing on streamlines and velocity distribution in sprue base, runner and in-gate. Increasing well size was produced a vortex flow at the bottom of sprue base which increased the surface velocity of liquid metal in runner. Using a rather big sprue well could eliminate vena contracta, but in-gate velocity was... 

Nowadays pull system is widely used in many industries. In the recent decade, many researchers adopt pull system to supply chain and present preference of this system. In this paper, a general Pull system for a stochastic supply chain process will be adapted along with optimizing a Pull Stochastic Supply chain. This Supply Chain, SC, is used with combining CONWIP and KANBAN, the two famous pull systems, for controlling the SC. Under assumptions of stochastic demand rate, stochastic production and transportation times, and stochastic distributions for backlog cost, a simulation modeling is used. In optimization process, concerning supply chain complexity, a simulation optimization procedure... 

Natural ventilation has been used to increase indoor air quality, remove pollutants, and remove heat absorbed in the building structure. Some architectural features such as wind-catcher systems are used to induce airflow into buildings, and openings equipped with louvers are employed to reduce solar daylight while allowing natural ventilation. Earlier studies on ventilated louvers and wind-catchers have shown the impact of the louvers’ opening positions and slat angles. However, their combination with each other has been less studied. This paper presents CFD simulations of cross-ventilation in a generic isolated building integrated with a one-sided roof-top wind-catcher and the outlet... 

The performance of a vertical ground source heat pump system (GSHPS) largely depends on the fluid temperature leaving the borehole heat exchanger (BHE) that may be affected by the short-term behavior of the BHE. Although considerable research has been carried out to analyze the short-term transient response of the BHEs, few studies have investigated its impact on dynamic simulation of GSHPS. Therefore, this paper presents a numerical approach based on a transient BHE model to evaluate the performance of a residential GSHPS over short and long timescales. The numerical results are compared with the results of EnergyPlus software. It is shown that the proposed model can appropriately predict... 

To determine the curvature of the exit profile in the extrusion process of non-symmetrical flat dies, the dead metal zone profile was predicted using the energy minimization method. The dead zone is a natural non-linear die for the process and it is pragmatic to use this non-linear die to estimate the value of the exit profile curvature and the required bearing length for reducing this deviation. The velocity field is calculated based on Hermite cubic spline and some additional assumptions. In non-symmetrical dies the entrance section of the deformation region is not flat. Considering this fact, axial velocity decreases with increasing the distance to die center line which is in agreement... 

In the present paper, conceptual duct shape design for kinetic energy extraction with hydrokinetic turbines is discussed. The goal is to find a single-passage axisymmetric geometry that holds stable flow with maximum kinetic energy flux at duct throat. For finding the optimum duct shape, the fluid flow was numerically simulated in a wedge shaped space with Flow-Simulation Software. In a multi-stage conceptual design, tabulated configurations were employed to study each geometrical characteristic separately. These include curvature of profile camber, trailing edge shape, profile tip shape, and duct exit cross sectional area. The revolved profile of each duct consists of a well constrained... 

An active switched-capacitor 4-path bandpass filter suitable for multi-standard applications in ultra-high frequency (UHF) band with different channel bandwidths is designed and simulated in 0.18 μm CMOS technology. The baseband impedance of the filter is implemented as a second-order Gm-C low-pass filter which can be used to tune the channel bandwidth as well as the quality factor (Q) of the RF filter. The center frequency of the filter can be tuned from 100 MHz up to 1.5 GHz by changing the clock frequency applied to the filter while its bandwidth can be tuned by tuning impedance parameters in any center frequency. To do so, the baseband impedance utilizes a frequency dependent negative... 

In this paper the Contour Integral (CI) method is applied to the design and analysis of substrate integrated waveguide (SIW) filters. This method is used for planar structures and is based upon the discretization of the boundary of the structure and needs less memory than full wave methods. For decreasing the computation time, circular vias replaced by square ones. A four pole Chebyshev X band dual inductive post substrate integrated waveguide filter is designed using this technique and the results are compared with measurements and simulation software Ansoft HFSS. Good agreement is seen between the results  

Efficient radiant heating systems are promising technologies for energy saving in commercial and building sectors together with improving occupant thermal comfort. However, the thermal performance of radiant systems in buildings has not been fully understood and accounted for in currently available building energy simulation software. In this paper, the effects of design parameters on performance of a typical radiant floor heating system have been studied using finite element method. A radiant heating system includes a number of pipes filled with hot water. Therefore, several design parameters such as pipe diameter, type (material), number, thickness and cover of system are affected on the... 

OMG's Model Driven Architecture (MDA) has deeply influenced modern-day software development, not only by providing promising means for automating the software process, but also through revitalizing the role of modeling in software development, the importance of which had been neglected during the recent euphoria over lightweight development methods. However, MDA's need to remain reasonably abstract means that it is more a software development approach rather than a standalone methodology, and therefore needs methodology support to be practically useful. Several MDA-based methodologies exist today, yet the need remains for the definition of an instantiable MDA-based development process. We... 

A lot of laboratory experiments have been carried out to investigate each aspect of ultrasonic wave s role on fluid flow behavior through porous media. Despite all experimental works, little attention has been paid for modeling the ultrasonic wave influence on capillary imbibition, which is the main mechanism of production in fractured reservoirs. At this work the process of imbibition with and without applying ultrasonic waves is mathematically modeled by modification of piston-like model. In contrast to this model s assumption, in which mobility ratio is assumed to be constant, here permeability variation due to increase in water saturation is considered in numerical solution. To evaluate... 

The high vehicle congestion is the main contributing factor to air pollution originated from the engine's combustion in many urban areas. Grade separation projects have been used to solve this problem and have resulted in overall air pollution reduction in many cases. Many grade separation projects are constructed near sensitive urban locations accommodating susceptible individuals. This research argues that in such cases in addition to the overall air pollution reduction, air pollution concentration near sensitive locations is an influential factor for deciding the appropriate scenario. This research proposes a complementary simulation-based method for assessing the resulting pollution... 

In this study, a general 3D distributed modeling of Trolling-Mode AFM (TR-AFM) as a nanorobot is presented to analyze the 2D manipulation process of a spherical cell. To this aim, the analysis is categorized into 3 sections. In the first section, 6 deformations of TR-AFM are taken into account, and the standard model of the system is obtained. Moreover, the system is simulated in ANSYS Workbench. The results of modal and transient analyses of the system from both analytical and software methods reveal high agreement, which confirms the accuracy of the presented analytical model. In the second section, by utilizing the 3D derived model, displacement of a spherical yeast single cell (W303)...