Sharif Digital Repository

Functionally-graded NiO-8. mol % YSZ composite films were prepared by a controlled voltage-decay electophoretic deposition (EPD) process. The films consisted of three layers with varying NiO concentrations and porosities. Effects of different parameters including the type of the organic media, solid concentration, NiO:YSZ ratio, and iodine on the stability of EPD suspensions and deposition kinetics were studied. A stable NiO-YSZ suspension was attained in isopropanol with NiO-YSZ ratio of 60:40 and iodine concentration of 0.5. mM. The composite film contained varying NiO concentration from 46. wt.% near the substrate to 32. wt.% close to the electrolyte with 42. wt% NiO in the intermediate... 

Rheological behavior of agglomerated silver nanoparticles (~ 40 nm) suspended in diethylene glycol over a wide range of volumetric solids concentrations (φ{symbol} = 0.11-4.38%) was studied. The nanoparticle suspensions generally exhibited a yield pseudoplastic behavior. Bingham plastic, Herschel-Bulkley and Casson models were used to evaluate the shear stress-shear rate dependency. Analyzing the effect of silver concentrations on the yield stress and viscosity of the suspensions followed an exponential form, revealing an increase in the degree of interparticle interactions with increasing solid concentrations. Fractal dimension (Df) was estimated from the suspension yield stress and... 

In the present research, NiO–SDC (Samarium doped Ceria) nanopowder was synthesized through sol–gel combustion method using citric acid as a reducing agent (fuel) and metal nitrates as an oxidant. The characteristics of the synthesized powder were thoroughly analyzed by DTA/TG, XRD, BET and FESEM/EDX. Tubular gel-casted porous specimens of NiO–SDC (50:50 wt%) composite materials were produced after stabilizing suspensions of composite powder in an aqueous environment by addition of 3 wt% dispersant and 2.5 wt% agar as the gel builder. The effect of Dolapix CE64 as a dispersant, agar as a gel-builder and the amount of solid loadings on the processing and properties of porous ceramics was... 

A numerical study on mixing/segregation phenomena in a pressurized fluidized bed with large particles of Geldart D type of binary density but same diameter with high velocity gas was performed by the use of discrete particle simulation. Particle mixtures are composed of spherical particles with 2mm diameter and 1g/cm3 flotsam density and different jetsam densities of 1.25, 2 and 2.5g/cm3 with jetsam volume fraction of 0.5. The particles are initially packed approaching perfect mixing state in a rectangular bed and then fluidized by gas uniformly injected at the bottom of the bed. Effect of increase of pressure and density ratio was investigated and mixing/segregation behavior is discussed in...