Sharif Digital Repository

Gas flooding processes have emerged as attractive enhanced oil recovery (EOR) methods over the last few decades. Among different gas flooding processes, CO2 flooding is recognized as being most efficient for displacing oil through miscible displacement. Minimum miscibility pressure (MMP) is a crucial parameter for successfully designing CO2 flooding, which is traditionally measured through time-consuming, expensive, and cumbersome experiments. In the present study, a new reliable model based on feed-forward artificial neural networks was presented to predict both pure and impure CO2-crude oil MMP. Among various properties and parameters, reservoir temperature, reservoir oil composition, and... 

Phase equilibrium data are required to estimate the capacity of a geological formation to sequester CO2. In this paper, a comprehensive study, including both thermodynamic and neural network modeling, is performed on CO2 solubility in brine. Brine is approximated by a NaCl solution. The Redlich-Kwong equation of state and Pitzer expansion are used to develop the thermodynamic model. The equation of state constants are adjusted by genetic algorithm optimization. A novel approach based on a neural network model is utilized as well. The temperature range in which the presented model is valid is 283-383K, and for pressure is 0-600bar, covering the temperature and pressure... 

The influence of the addition of the nonionic surfactants C12DMPO, C14DMPO, C10OH, and C10EO5 at concentrations between 10-5 and 10-1 mmol/L to solutions of β-casein (BCS) and β-lactoglobulin (BLG) at a fixed concentration of 10-5 mmol/L on the dilational surface rheology is studied. A maximum in the viscoelasticity modulus |E| occurs at very low surfactant concentrations (10-4 to 10-3 mmol/L) for mixtures of BCS with C12DMPO and C14DMPO and for mixtures of BLG with C10EO5, while for mixture of BCS with C10EO5 the value of |E| only slightly increased. The |E| values... 

Unique physiochemical and biological properties of nanofibers along with the choice of a wide variety of materials for both fabrication and tunable release patterns make nanofibers an ideal option for drug delivery. Loading antibacterial agents into nanofibers has attracted great deal of attention. Whilst there are several studies focusing on applying new generations of antibacterial materials, antibiotics are still the gold standard in clinical applications. Therefore, we aimed at introducing antibiotic-loaded nanofiber substrates with potential for topical skin delivery applications, reduced consumption of antibiotics and increased storage time. We applied Amoxicillin (AMX) as a model drug... 

This experimental study is aimed at evaluation of the performance of secondary WAG injection in carbonate cores at different pressures. To do so, a comprehensive series of high-pressure high-temperature (HPHT) core flooding tests are conducted. The fluid system includes reservoir dead and live crude oil, CO 2, and synthetic brine while the chosen porous media consists of a number of fractured carbonate core samples. Parameters such as oil recovery factor, water and oil production rates, and pressure drop along the core are recorded for both dead and live oil. According to results, at first increasing pressure improves the oil recovery, but this improvement after MMP is not as significant as... 

In this study, the properties of poly (vinyl alcohol)(PVA) films incorporated with Zataria multiflora essential oil (ZMO) as a potential antioxidant/antibacterial material was investigated. PVA films were prepared from PVA solutions (2% w/v) containing different concentrations of ZMO. Water solubility, moisture absorption, water swelling, and water vapor permeability for pure PVA films were 57 ± 1.1, 99 ± 3.2%, 337 ± 8%, and 0.453 ± 0.015 g mm/m2 h, respectively. Incorporation of ZMO into PVA films caused a significant decrease in water swelling and moisture absorption and increase in solubility and water vapor permeability. Tensile strength, elastic modulus, and elongation at break for pure... 

Iron oxide nanoparticles, γ-Fe2O3NP, were deposited onto the surface of multi-walled carbon nanotubes and CNT/γ-Fe2O3NP hybrid nanomaterials were obtained. Then linear-dendritic ABA type block copolymers consisting of polyethylene glycol as B block and poly(citric acid) as A block, PCA-PEG-PCA, were synthesized and cisplatin (cis-diamminedichloroplatinum (CDDP) - a platinum-based chemotherapy drug) was conjugated with their carboxyl functional groups and CDDP/PCA-PEG-PCA anticancer prodrugs were prepared. Noncovalent interactions between CDDP/PCA-PEG-PCA anticancer prodrugs and CNT/γ-Fe2O3NP hybrid nanomaterials led to CDDP/PCA-PEG-PCA/CNT/γ-Fe2O3NP drug delivery systems. There are several... 

Purpose - The purpose of this paper is to investigate the performance of a specific class of high-resolution central schemes in conjunction with the black oil models for hydrocarbon reservoir simulation. Design/methodology/approach - A generalized black oil model is adopted, in which the solubility of gas in both oil and water and evaporation of oil are considered, leading to a system of equations prone to degeneracy. A computer code is generated and three test cases are solved to evaluate the performance of various schemes in terms of accuracy and discontinuity handling. Findings - It is shown that, although some of the central schemes are highly sensitive to the choice of... 

In this work, an expression for the free volume Gibbs energy model based on the local composition concept (LCC) has been proposed in correlating the solubility, the partitioning and the surface tension of β-lactam, tetracycline, fluoroquinolone and chloramphenicol antibiotic groups in water, alcohol, ketone, trihalomethane, ether and ester solvent groups. Similar to the LCC models the proposed model has two combinatorial and residual terms. The extended Guggenheim model is used as combinatorial term and a new local composition-based model, which is the extended local area fraction NRTL-NRF model, is proposed for the residual term. The results obtained from the proposed model have been... 

Deep wells suffer from the instability and disintegration of natural polymers and other commonly used additives under high pressure and high temperature condition. As a result, serious problems such as hydraulic loss, stuck pipe, and high torque and drag are expected to take place which leads to a dramatic increase in cost and time. This study presents the functionality of a novel synthetic based acrylamide-styrene copolymer (SBASC) as a supersede additive for water-based drilling mud. First, the SBASC was synthesized using an emulsion polymerization process and its particle morphological and polymer chain structural properties were determined by Field Emission Scanning Electron Microscopy... 

In the recent years, declination of oil reservoir causes the importance of researches on enhancement of oil recovery processes become more important. One of wide applicable approaches in enhancement of oil recovery is carbon dioxide injection which becomes interested because of relative low cost, good displacement and environmentally aspects. The injection of carbon dioxide to oil reservoir causes the lighter hydrocarbons of crude oil are extracted by CO2. This phenomena can be affected by various factors such the solubility of hydrocarbons in carbon dioxide so in the present investigation Fuzzy c-means (FCM) as a novel approach for estimation of solubility of alkanes in carbon dioxide in... 

This paper introduces the genetic algorithm-kernel partial least square (GA-KPLS), as a novel nonlinear feature selection method. This technique combines genetic algorithms (GAs) as powerful optimization methods with KPLS as a robust nonlinear statistical method for variable selection. This feature selection method is combined with artificial neural network to develop a nonlinear QSAR model for predicting activities of a series of substituted aromatic sulfonamides as carbonic anhydrase II (CA II) inhibitors. Eight simple one- and two-dimensional descriptors were selected by GA-KPLS and considered as inputs for developing artificial neural networks (ANNs). These parameters represent the role... 

Nitrogen has been appeared as a competitive gas injection alternative for gas-based enhanced oil recovery (EOR) processes. Minimum miscibility pressure (MMP) is the most important parameter to successfully design N2 flooding, which is traditionally measured through time consuming, expensive and cumbersome experiments. In this communication, genetic programming (GP) and constrained multivariable search methods have been combined to create a simple correlation for accurate determination of the MMP of N2-crude oil, based on the explicit functionality of reservoir temperature as well as thermodynamic properties of crude oil and injection gas. The parameters of the developed... 

In this study, the synthesis and characterization of a novel nano-porous superabsorbent hydrogel with high water swelling capacity is described. A nano-porous hydrogel was prepared by employing (2-dimethylaminoethyl) methacrylate (PDMAEMA) as a pH sensitive monomer and sodium alginate (SA) as a water soluble polysaccharide under γ-ray irradiation. The polymerization reaction was performed at room temperature in the absence of chemically toxic crosslinking agent and initiators. The interactive parameters including biopolymer backbone concentration, monomer concentration and γ-irradiation dose were selected as major factors in the synthesis of superabsorbent and three levels for each factor... 

The bioconversion of abundant and renewable cellulosic biomass into ethanol as an alternative to petroleum is gaining importance due to the realization of diminishing natural oil and gas resources. Agricultural and foresty plant residues are an abundant and renewable source of sugar substrates that could be fermented to ethanol. A thermochemical treatment of biomass in which both cellulose and hemicellulose are hydrolyzed to soluble sugar is necessary before yeast fermentation. After thermochemical treatment, cellulase enzymes must be introduced in the system to hydrolyze any remaining cellulose. The simultaneous saccharification and fermentation (SSF), is a method which converts... 

Background: The bio-oxidation of ferrous iron is a potential industrial process in the regeneration of ferric iron and the removal of H2S in combustible gases. Bio-oxidation of ferrous iron may be an alternative method of producing ferric sulfate, which is a reagent used for removal of H2S from biogas, tail gas and in the pulp and paper industry. For practical use of this process, this study evaluated the optimal pH and initial ferric concentration. pH control looks like a key factor as it acts both on growth rate and on solubility ofmaterials in the system. Results: Process variables such as pH and amount of initial ferrous ions on oxidation by A. ferrooxidans and the effects of process... 

Introduction: Carbon nanotubes (CNT) have recently been studied as novel and versatile drug and gene delivery vehicles. When CNT are suitably functionalized, they can interact with various cell types and are taken up by endocytosis.Areas covered: Anti-cancer drugs cisplatin and doxorubicin have been delivered by CNT, as well as methotrexate, taxol and gemcitabine. The delivery of the antifungal compound amphotericin B and the oral administration of erythropoietin have both been assisted using CNT. Frequently, targeting moieties such as folic acid, epidermal growth factor or various antibodies are attached to the CNT-drug nanovehicle. Different kinds of functionalization (e.g., polycations)... 

Background: Flagellin of Salmonella enterica serovar Enteritidis (SEF) stimulates immune responses to both itself and coapplied antigens. It is therefore used in vaccine development and immunotherapy. Removal of pathogenic S. enterica ser. Enteritidis from SEF production process is advantageous due to the process safety improvement. The protein solubility analysis using SDS-PAGE indicated that 53.49% of SEF expressed in Escherichia coli formed inclusion bodies. However, the protein recovery from inclusion bodies requires a complex process with a low yield. Objective: We thus aim to study possibility of enhancing SEF expression in E. coli in soluble form using chemical and molecular... 

Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ∼10 μm or less (PM10) during dust storms in Ahvaz in April-September 2010. TSP and PM10 samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM10 were 1,481.5 and 1,072.9 μg/m 3, respectively. Particle concentrations during the Middle Eastern... 

Water-soluble cobalt(II) tetradentate Schiff base complexes have been shown to form charge transfer (CT) complexes with a series of nucleoside monophosphates including adenosine-5′-monophosphate (AMP) and cytidine-5′-monophosphate (CMP). The investigated water-soluble cobalt(II) Schiff base complexes are (i) disodium[{bis(5-sulfo-salicylaldehyde)-o-phenylenediiminato}cobalt(II)], Na 2[Co(SO3-salophen)] (1); (ii) disodium[{bis(5-sulfo-salicylaldehyde)-4,5-dimethyl-o-phenylenediiminato} cobalt(II)], Na2[Co(SO3-sal-4,5-dmophen)] (2) and (iii) disodium[{bis(4-methoxy-5-sulfo-salicylaldehyde)-4, 5-dimethyl-o-phenylenediiminato}cobalt(II)], Na2[Co(SO 3-4-meosal-4,5-dmophen)] (3). The formation...