Sharif Digital Repository

A 2D simulation has been carried out to study the effect of magnetic field on heat transfer and pressure drop of nanofluid flowing through a pipe filled with porous medium. The nanofluid flow is modeled as a single-phase flow, and Darcy–Brinkman–Forchheimer equation is employed to model fluid flow in porous media. A constant uniform heat flux was imposed on the walls of the cylinder, and the values of Darcy number, Hartmann number, and volume fraction of the nanoparticles were selected as 0.1, 200, and 0.2, respectively. Effects of parameters such as Reynolds number, the material of the porous medium (conductivity and porosity), and material of nanofluids have been investigated in the... 

In this thesis, the process of laser assisted machining (LAM) of metal matrix composites (MMC) is experimentally studied. The effects of process parameters (cutting speed, feed rate and depth of cut), laser parameters (laser power, laser frequency and laser beam angle), and the percentage of reinforcing particles on the tool wear and the surface roughness are investigated. Furthermore, the effects of these parameters on the built-up edge (BUE), chip shape, and workpiece temperature are explored.The experiments were performed using uncoated tungsten carbide and PCD tools under dry conditions. In order to analyze the sensitivity of the process parameters, the Plackett-Burman method was used... 

In modern era, standpoints about atrium design have been revolutionized. In modern architecture, atrium not only designed for illuminating purposes but also designed by natural ventilation and passive cooling policies. Numerous parameters are making role in thermal efficiency of Atrium. A couple of these parameters are Atrium shape and openings area. In high rise atria the lower level rooms enjoy the advantage of buoyancy-driven ventilation while the upper level rooms suffer from its lack or weak presence. One strategy to solve this problem is designing building with various opening area in different heights but manipulating the opening size is restricted by some facts. Excessive Opening’s... 

Fully developed fluid flow and heat transfer is numerically investigated in micro-channels. There are many techniques to intensify heat transfer for internal flows, such as: increasing Reynolds number, extending surface area of channel wall and also disrupting the boundary layer thickness on the wall. Among these, extension wall surface area is a common technique. There are several ways to extend surface area including finned, slotted, chemically etched, grooved as well as porous media adhered wall surface. One other method that we work on it is modifying wall cross-section and usage of uniform suction porous media. The governing equations include the momentum equation of the core region... 

Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the... 

When classical Fourier law of heat conduction is not applicable due to finite speed of heat propagation in a medium, non-Fourier heat conduction is used. In non-Fourier heat conduction, heat transfer is studied considering finite speed of heat flux (thermal wave) or temperature gradient or both (dual phase lag). Biological tissues like skin are one of the materials which show non-Fourier behavior during usual heating processes. In this research heat transfer in human skin is modeled by Fourier, thermal wave and dual phase lag (DPL) models. The equations are solved using the finite difference method and the temperature distribution across the tissue is calculated. In thermal wave model,... 

Airlift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of the liquid column. Gas-liquid two-phase flow being the main part of the flow through these systems, flowing in vertical pipes of airlift pumps has different regimes namely bubbly, slug, churn and annular. Generally these regimes appear starting from bubbly to annular from bottom to top of the upriser pipe. Gas/liquid multiphase flows occur in a wide range of natural and man-made situations such as boiling heat transfer, cloud cavitation, bubble columns and reactors in the chemical industry, cooling circuits of power plants, spraying of liquid fuel and paint, emulsions, rain, bubbles... 

Corrosion is a main problem for oil and gas industries at refineries and petrochemical process. Presence of sulfur compounds in crude oil and creation a corrosive environment for steel structure, caused failure and unfortunate damages. H2S which present at cracking and sweetening process in sour feed obtain hydrogen atoms that can diffuse into steel structure which involve with its instruments and consequent to hydrogen damage .distribution and storage of these sour environments can be done by high strength low alloy steel (HSLA).Electrochemical hydrogen permeation test were performed to measure the hydrogen permeation current through A106/GR B pipeline steel in the electrolytes simulating... 

Revolutionary developments in marketing, information and communications technology continue to transform the banking and financial industry. The objectives of this thesis are mainly to examine the role and perspective of core banking solutions as the heart of IT department in any financial institution, for addressing requirements of both financial institutions and customers. The study explores criteria for measuring core banking solutions, the time of core replacement in any financial institution and agenda that must be considered in the core banking replacement process.
Moreover, in this thesis, the core banking solution architectures and the Service Oriented Architecture (SOA) as the... 

There are some problems in calculation of heavy and huge equations which are ill-posed and nonlinear. They need to be solved by the processors. The errors are important in our measurements because this precision is very important in calculation. The Block Method approach solving Forward Problem in Electrical Impedance Tomography (EIT) results produce an exact solution only if the measurements are done with enough accuracy. In this thesis, a 3D model of EIT with Block Method is implemented by means of Digital Signal Processor (DSP) to obtain exact results. In this work it has used a powerful processor called TMS320C6416DSK to reduce the measurement error in equations. It has used Code... 

Most of the investigations during the two past decades focused on the effect of moisture and temperature on the bond at the interface of carbon or glass-fabrics and concrete, masonry or timber. Few investigations have studied the effect of chemical solutions, dry heat exposure and ultravilolent (UV) radiation on the bond at the interface of other types of fiber reinforced-polymers (FRPs) and masonry, timber and concrete in the short and long terms. Therefore, this research aims to investigate the effect of five chemical solutions with pH of 2.5±0.1, 7±0.1, 7.25±0.1, 10±0.1 and 12.5±0.1 on the interfacial bond strength between seven types of FRPs (unidirectional, bidirectional and hybrids)... 

Based on Hamilton’s principle, a three-dimensional semi-analytical method for the analysis of free vibration of a nano-composite plate within the couple stress theory is developed. Computation of dynamic behavior as well as natural frequencies and mode shapes is interested. In this method, the mechanical displacement functions, in each layer, are defined as product of a base function and a three-dimensional polynomial with unknown coefficients. The base functions are defined with respect to the kinematical boundary condition and the domain geometry. The mode shapes will be obtained and the accuracy of the present approach is demonstrated by comparison it in both classical elasticity and... 

In today’s highly competitive world, the countries with strong economies are able to produce their products at a lower price, better quality and at the right time in the market, therefore, in the performance evaluation of economic of the organizations and project management, several factors are involved; the most important are: time, price, and product quality. In this dissertation, a new method for performance evaluation in the field of project management based on combining the concept of the golden triangle of the project and the techniques available in decision science is presented. At first, three major areas of the golden triangle namely time, cost, and quality are selected for... 

Today, the major part of the capital of each country, especially developing countries, is devoted to its construction and construction projects. On the other hand, one of the growth and economic factors of any society is the success of its development projects. In fact, one of the activities of developing countries to build economic infrastructure is the implementation of infrastructure development projects that account for the bulk of the country's budget annually, and therefore the principled planning of these projects is from the requirements and it is necessary to achieve the lowest cost-to-productivity ratio. In Iran, which is considered as a developing country, a significant amount is... 

Environmental management with emphasis on protecting environment is today one of the most important problems for customers, governments, employees and competitors, and international and global pressures has required organizations to produce environmentally consistent products and services. This challenge has resulted in emergence of a new concept namely green supply change management in the realm of business which is a combination of environmental thinking and supply chain, which will be followed by competitive advantages for firms. This approach has widely attracted the attention of industries, governments and institutions relevant to environment. The aim of this study is to identify main... 

Today the losses due to road accidents in Iran are very high. For this reason, it is essential to investigate the effective factors on the road accidents. Therefore, at first, there is a need to identify the solutions of reducing the accidents, their priories and finally their efficiency improvement. In this research, using Hierarchical Analysis Method, the solutions to reduce the accidents are prioritized and then In order to conduct the AHP analysis, Expert Choice software was chosen. According to research findings, the factors that lead to accidents are categorized as: Human factors, road environmental factors, vehicle, natural factors and managerial factors. The findings show that in... 

In this research, we focus on study and fabrication of organic inorganic solar cells. We use and optimize various methods such as one-step spin-coating, two-step sequential deposition and vapor-assisted solution process (VASP), to prepare high quality perovskite films. One-step deposition is simplest method for deposition of perovskite films. Although perovskite deposition by this method is very simple, the control of uniformity and surface film morphology is difficult. Chlorine inclusion, optimization of annealing conditions, and a sequential solution-based deposition method have been demonstrated to increase film coverage and uniformity. Hence, we use sequential deposition method for... 

The Iran-China 25-year Cooperation Program on the further economic development particularly energy area signed on 27 March 2021 by Iran, which suffered from many years of political and economic isolation and China, the second global economy. Energy transition is an essential issue in both country's energy systems which calls for a medium energy carrier that will be the natural gas. China is seeking for new natural gas resources in order to achieve its ambitious net-zero goals and Iran has targeted 50% reduction in its energy intensity. The necessity of supplying the natural gas for Pakistan and China through the CPEC (China-Pakistan Economic Corridor) by Iran is an important criterion in the... 

The current study was attributed to uranium uptake by Varion-AP resin from Saghand, Iran Uranium Mine, ore leach liquor. A suitable high-efficiency system was designed for continuous ion exchange at the bench scale and the uranium uptake parameters were optimized. In this system, 1 reactors was used with a volume of 3 liters in stage with the same height difference. A leach liquor containing uranium with a concentration of between 200 and 300 mg/l was flowed from the feed storage by gravity between reactor 1 to 10 at a flow rate of 30 lit/h and Varion-AP resin was transferred in counter-current flow from stage 10 to 1 by a pneumatic pump. The output of each reactor had a screener that... 

In the process of extraction and refining of crude oil, a considerable amount of waste water are produced and if they are not removed, they would become one of the most hazardous environmental factors. Furthermore, purification and separation of such wastewaters are extremely costly, which with an increase in separation efficiency can lead to a decrease in valuable product loss. On the other hand, in the extraction process from oil reservoirs, because of porous and permeable nature of them, solid particles may be added to the extracted crude oil, which can result in an obstruction in pipelines and transport equipment.The most conventional method for separating a mixture of water, oil, and...