Sharif Digital Repository

In this work, the electrophoretic deposition method was utilized to immobilize TiO2 particles on stainless steel substrates. In addition, for the first time, statistics-based experimental design using response surface methodology was employed to investigate the effect of four key coating parameters (i.e. applied voltage, calcination temperature, photocatalyst weight percentage, and deposition time) on the photocatalytic degradation. Analysis of variance revealed that the proposed model was adequate. X-ray diffraction and scanning electron microscope were used to evaluate the effects of the parameters on degradation efficiency. The optimum applied voltage, calcination temperature, catalyst... 

Layers of cobalt and manganese oxides were co-deposited or deposited on top of each other or next to each other by potentiostatic method onto stainless steel substrate. Deposition potentials of 1 and -1 V for the anodic and cathodic depositions were employed. Specific capacitance values in the range of 38.5-78 F g -1 were found with cobalt oxide on top of manganese oxide having the lowest and manganese oxide on top of cobalt oxide having the highest capacitances. The usefulness of the electrodes was characterized by cyclic voltammetry, charge-discharge cycling, and electrochemical impedance spectroscopy in 2 M NaOH electrolyte for redox supercapacitor applications. The latter presented the... 

Bioactive glass is coated on implant's surface to improve corrosion resistance and osseointegration, when placed in the body. Bioactive glass particles were synthesized through a sol-gel process and deposited along with chitosan to form a composite coating on a stainless steel substrate using electrophoretic deposition technique. Stable suspensions of chitosan-bioactive glass were prepared using bioactive glass particles (<1 μm) and 0.5 g/l chitosan solution. The influence of ethanol-water ratio on deposition yield was investigated. For all process conditions, best results were achieved with suspension of 30 vol% water in ethanol-water containing 2 g/l bioactive glass. FTIR studies showed... 

Solid oxide fuel cell (SOFC) is one of the promising candidates for clean energy production. Due to the high operating temperature of SOFCs, a protective coating is commonly applied on the surface of interconnects to prevent oxidation. In this study, electrophoretic deposition was employed to prepare a manganese-cobalt spinel coating on ferritic stainless steel (AISISAE430) substrates. Nanostructured MnCo2O4 powder with an average crystallite size of 60nm was utilized and the sintering behavior of the coatings at different temperatures was studied. Non-isothermal and isothermal sintering behavior of the powder were examined by employing a sensitive dilatometer. Master sintering curve of the... 

HAp and HAp/ZrO2 composite coatings were successfully electrodepesited on 316L stainless steel substrates in the solutions containing ZrO2 particles at different concentrations. The effects of ZrO2 content on characteristics of the coatings were investigated using X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), scanning electron microscopy (SEM) and bonding strength test. Polarization and electrochemical impedance spectroscopy measurements were carried out in order to evaluate corrosion behavior of the coatings. In-vitro test in SBF and further SEM observations were performed to examine bioactivity of the coatings. HAp/ZrO2 composite coatings showed better... 

Bacterial toxicity of graphene nanosheets in the form of graphene nanowalls deposited on stainless steel substrates was investigated for both Gram-positive and Gram-negative models of bacteria. The graphene oxide nanowalls were obtained by electrophoretic deposition of Mg2+-graphene oxide nanosheets synthesized by a chemical exfoliation method. On the basis of measuring the efflux of cytoplasmic materials of the bacteria, it was found that the cell membrane damage of the bacteria caused by direct contact of the bacteria with the extremely sharp edges of the nanowalls was the effective mechanism in the bacterial inactivation. In this regard, the Gram-negative Escherichia coli bacteria with an... 

The present research work aims to employ plasma focus in order to deposit molybdenum (Mo) on the 304 stainless steel substrate. The processing parameters were shot numbers as well as the distance of substrate from the anode tip. Stereo, atom force microscopy (AFM) and field emission-scanning electron microscopy (FE-SEM) equipped with energy dispersive X-ray spectroscopy (EDS) were used to study the deposited coatings. Microhardness measurements were also performed on the coatings. Results indicated that the plasma focus can be successfully applied to deposit Mo anode on the stainless steel substrate. The coatings contained discrete pores with sizes varying by processing parameters. The... 

The present research aims at depositing molybdenum on stainless steel substrate using dense plasma focus (DPF) device. The varying parameter was the angular position of substrate surface from the anode tip. The deposited layers were characterized using various analyses such as X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), atomic force microscopy (AFM), and microhardness measurements. Microstructural observations revealed that the deposited coatings had rough surfaces containing holes as well as a stripe-featured structure covering the whole surface including the interior regions of the holes and the regions among them.... 

Composite coatings of Hydroxyapatite (HA) with ceramics, polymers and metals are used to modify the surface structure of implants. In this research, HA/TiO2 composite coating was fabricated by electrophoretic deposition (EPD) on 316 stainless steel substrate. HA/TiO2 composite coatings with 5, 10 and 20 wt.% of TiO2, deposited at 40 V and 90 s as an optimum condition. The samples coated at this condition led to an adherent, continuous and crack-free coating. The influence of TiO2 content was studied by performing different characterization methods such as scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), corrosion resistance in simulated body fluid (SBF),... 

Experimental parameters have direct influences on materials properties and therefore their applications. The effect of plasma power on the properties of cobalt oxide thin films, prepared using plasma-enhanced chemical vapor deposition technique, on stainless steel substrates have been addressed in this paper. The structural, morphological, and compositional properties of these films were investigated by means of X-ray diffraction (XRD), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) technique. The XRD patterns demonstrated the growth of polycrystalline Co3O4 thin film with a cubic spinel structure such that the intensity of (511) and (311) peaks increase as the... 

The current paper reports the deposition of sulfur micro-particles using sulfur vapor deposition (SVD). Sulfur particles in size of 5 to 45 μm were deposited on a stainless steel substrate to be used as the cathode with porous structure in lithium sulfur (Li-S) batteries. Mass loading of about 0.5 mg cm-2 was obtained from this pure sulfur cathode. The structure of this binder-free cathode was characterized by field emission scanning electron microscopy (FESEM), x-ray spectroscopy (EDS), and x-ray diffraction (XRD). The electrochemical performance of the battery with two different organic liquid ether- and carbonate-based electrolytes was investigated and the results demonstrated that the... 

TiO 2 -rGO nanocomposite coatings were obtained by electrophoretic deposition (EPD) technique of TiO 2 nanoparticles and graphene oxide (GO) on stainless steel substrate. First, GO particles were synthesized using a modified Hummers' method. GO was reduced electrochemically to form a coating in the presence of nano-sized TiO 2 particles. The influences of different parameters such as GO concentration, coupling co-electro-deposition parameters (electrophoretic duration and voltage) on thickness, surface morphology and, corrosion behavior of the as-synthesized TiO 2 -rGO nanocomposite coatings were systematically surveyed. The morphology and microstructure were investigated by field emission... 

Abstract : Vertically aligned carbon nanotube (CNT) arrays were synthesized by thermal chemical vapor deposition (CVD) on stainless steel substrates coated by cobalt nanoparticles as catalyst. Morphological and elemental analyses conducted by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) revealed that bamboo-like CNTs were blocked by Co nanoparticles at the tips. The fabricated nanotubes underwent functionalization by electrochemical oxidation in sulfuric acid, and the subsequent structural studies, as well as Fourier transform infrared (FTIR) spectroscopy confirmed that the tips of functionalized CNTs were opened while oxygenated functional groups were... 

Ti and TiN thin films were deposited by means of electron beam evaporation on stainless steel substrates, and subsequently annealed at different temperatures (650, 750 and 850 °C) in a nitrogen atmosphere. The surface morphology of the films studied by atomic force microscopy (AFM), was found to exhibit specific multifractal properties depending on the annealing temperature. It turned out that the width of the multifractal singularity spectra, f(α), decreased as the annealing temperature increased up to 750 °C, but it increased when the temperature was kept at 750 and 850 °C accompanied by the rapid development of the surface objects. The generalized fractal dimension followed a similar... 

SQUID (superconducting quantum interference device) microscopes are versatile instruments for biosensing applications, in particular for magnetic nanoparticle detection in immunoassay experiments. We are developing a SQUID microscope based on an HTS rf SQUID magnetometer sensor with a substrate resonator. For the cryogenic set-up, a configuration was realized in which the cryostat is continuously refilled and kept at a constant liquid nitrogen level by an isolated tube connection to a large liquid nitrogen reservoir. The SQUID is mounted on top of a sapphire finger, connected to the inner vessel of the stainless steel cryostat. The vacuum gap between the cold SQUID and room temperature... 

Nonprecious and effective electrocatalyst development is an essential requirement for boosting water-splitting efficiency to obtain clean and sustainable fuels for future renewable energy demands. Herein, we reported an ultrafast and feasible strategy for constructing an S-doped bimetallic iron/nickel oxy(hydroxide) (S-(Fe/Ni)OOH) as a superior electrocatalyst for oxygen evolution reaction (OER). It is prepared by consequent electroplating of nickel nanocone arrays (NiNCAs) on carbon cloth (CC) and stainless-steel mesh (SSM) and then formation of S-(Fe/Ni)OOH layers on them by ultrafast one-step oxidation solution-phase method in the solution of Fe3+ and sodium thiosulfate at room...