Sharif Digital Repository

Residual stresses resulted from localized non-uniform heating and subsequent cooling during welding processes enact an important role in the formation of cracks and welding distortions and have severe effect on performance of welded joints. The present research performs a three dimensional transient thermo Elasto-plastic analysis using finite element technique to simulate welding process. Welding simulation procedure is developed using the parametric design language of commercial code ANSYS for single pass T and butt welded joints. The procedure verified with predicted residual stress field found in literature to confirm the accuracy of the method. The material of the weld metal, HAZ and the... 

IN738LC is one of the superior nickel base superalloys utilized at high temperatures in aggressive environments. However, experiencing high temperatures and stresses during service causes microstructure deterioration and degradation of mechanical properties in this alloy. To restore the microstructure and mechanical properties of the degraded alloy, rejuvenation heat treatments can be considered. In this study, the evolution of microstructural features in a creep damaged IN738LC superalloy during different stages of rejuvenation heat treatment cycles was investigated. During solution treatment stage, dissolution of coarsened γ′ precipitates, grain boundary films and transition zone around... 

The present study investigates the evolution of γ′ precipitate microstructure in a creep damaged IN738LC superalloy during different stages of rejuvenation heat treatment cycles. Dissolution of coarsened γ′ precipitates in the creep damaged alloy occurred during different solution treatments. The precipitates that did not dissolve completely during solution treatment and those formed during subsequent cooling were considered to be as remnant and cooling precipitates respectively. It was found that higher solution treatment temperatures result in lower volume fraction of remnant precipitates and further formation of cooling precipitates. Slower cooling rates after solution treatment gave the... 

In the selective laser sintering (SLS) method, layers of powder are scanned by a laser beam and sintered. The thermal gradients created by laser heating and the subsequent cooling of the sintered sections results in thermal stresses and part warping in the final part. Thermal gradients are dependent on the scanning algorithm, in particular, the scan vector length. In this work, an efficient scanning algorithm for the SLS process is presented with the aim to minimise the part warping in the final part due to thermally induced residual stresses, while maintaining the production time at a minimum. The proposed algorithm is implemented in a finite element simulation and scanning parameters... 

This research study aims at investigating the influence of partial solution treatment and the subsequent cooling strategy on the microstructure and mechanical properties of an as-cast Co–Cr–W superalloy. Three different cooling scenarios were employed to explore the effect of cooling rate on the carbide reprecipitation potential from the solid solution formed during the heat treatment. The partial dissolution/breakdown of the continuous network of the Cr-rich M7C3 carbides during the partial solution treatment cycle along with their transformation to M23C6 carbides and formation of secondary carbides during the cooling stage were taken into account to discuss the obtained hardness values,...