Sharif Digital Repository

H2S and CO2 are the main impurities in raw natural gas, which needs to be purified before use. However, the comprehensive utilization of H2S and CO2 has been ignored. Herein, we proposed a fully resource-based method to convert toxic gas H2S and greenhouse gas CO2 synchronously into CO and elemental S by using a novel electrochemical reactor. The special designs include that, in the anodic chamber, H2S was oxidized rapidly to S based on the I−/I3− cyclic redox system to avoid anode passivation. On the other hand, in the cathodic chamber, CO2 was rapidly and selectively reduced to CO based on a porous carbon gas diffusion electrode (GDE) modified with polytetrafluoroethylene and cobalt... 

Metal-oxide gas sensors are widely used for detection of detrimental H2S gas. Among them, SnO2-CuO system has been proved to be an excellent candidate. The previous theoretical 2D thin bilayer model was able to explain some aspects of H2S sensing performance of this promising system. However, experimental researches have indicated that response values for this system are very diverse and various SnO2-CuO multicomponent heterostructures such as rods, wires and particles have much higher response than their thin bilayer counterparts. Understanding the reason behind this differences would help fabrication of optimized sensor element. However, the previous model cannot address this issue mainly... 

In terms of manufacturability, there is a high tendency to deposit light-absorbing CuInS2 films by solution processing methods like ink-based depositions. In particular, for nanoparticle inks, the synthesis of highly dispersed and stable inks, with uniformity in the deposition process, is a serious challenge. Here, we demonstrate a novel two-step low-temperature CuInS2 film deposition method in which the In2S3 is deposited first. It then partially is converted into CuInS2 through the infiltration of Cu+ ions in the In2S3 layer in a dip-coating process. The resulting films are highly uniform, with diffraction peaks indicating the formation of pure CuInS2 phase. The proper stoichiometry of... 

Catalytic decomposition of the ethyl mercaptan over an H-ZSM-5 zeolite in a newly designed microreactor was undertaken in this study. A numerically developed distributor possessing superior flow distribution was amended to 24 parallel microchannels with 64 mm length, 700 μm width, and 600 μm depth. Ethyl mercaptan complete conversion required 350 °C through the developed microreactor while in a conventional fixed-bed-reactor 400 °C was needed. Higher selectivity towards the main products of this decomposition (hydrogen sulfide and ethylene) were observed in this microreactor in comparison to that of a fixed-bed-reactor. In addition, lower selectivity towards formation of byproducts was... 

The dearth of efficient, robust, and economical electrocatalysts for water oxidation is dubiously the key obstacle for renewable energy devices, so synthesis of efficient, and cost-effective metal-based water oxidation catalysts is vital. Herein, Co3O4, Co9S8 catalysts and their heterostructure Co3O4/Co9S8 were synthesized and evaluated as water oxidation electrocatalysts. The characterization of Co3O4, Co9S8, and Co3O4/Co9S8 electrocatalysts was performed using Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction techniques. The heterostructure Co3O4/Co9S8 (1.46 V) exhibited water oxidation electrocatalysis at extremely low onset potential compared to... 

Semiconductor-based photocatalysis is an efficient approach for degradation of organic pollutants. In this context, ZnO/g-C3N4 composite nanofibers containing carbonaceous species with different concentrations of g-C3N4 nanosheets (x = 0.25, 0.5, 1, 2, 10 wt%) noted as ZnO/carbon/(x wt%) g-C3N4 are prepared by electrospinning technique. For preparation of the composite nanofibers, bulk g-C3N4 is exfoliated to nanosheets, and then it is mixed with polyvinyl alcohol and appropriate zinc acetate content followed by electrospinning process. Thermal annealing of the as spun zinc acetate/poly(vinyl alcohol)/g-C3N4 nanosheets sample under N2 atmosphere leads to the formation of carbonaceous species... 

Evolution of renewable energies in the era of the modernized world has been strongly tied up to the incessant development of high-performance energy storage systems benefiting from both high energy and power densities. In the present work, binder-free positive electrodes are fabricated via a facile electrochemical deposition route in which copper oxide nanorods (CuO NRs) directly grown onto the copper foam (CF) are decorated with bimetallic cobalt-zinc sulfide nanoarrays (Co-Zn-S NAs). The fabricated Co-Zn-S@CuO-CFs represent promising specific capacity of 317.03 C.g−1 at 1.76 A.g−1, along with superior cyclic stability (113% retention after 4500 cycles). Negative electrodes were further... 

A novel catalyst of sulfidated iron-nickel supported on biochar (S-FeNi@BC) was synthesized to activate persulfate (PS) for the removal of trichloroethylene (TCE). A number of techniques including XRD, SEM, TEM, FTIR, BET and EDS were employed to characterize S-FeNi@BC. The influence of sulfur to iron ratio (S/F) on TCE removal was investigated by batch experiments and a higher TCE removal (98.4%) was achieved at 0.22/1 ratio of S/F in the PS/S-FeNi@BC oxidation system. A dominant role in iron species conversion was noticed by the addition of sulfur in FeNi@BC system. Significant enhancement in recycling of the dissolved and surface Fe(II) was confirmed which contributed to the generation of... 

This study demonstrated the prolonged benefits of polyvinyl-coated calcium peroxide (PVA@CP) in Fe(II)/nFeS mediated Fenton-like reaction. PVA@CP was prepared by a coating of PVA on calcium peroxide (CP) and synthesized nano-sized iron sulfide (nFeS) was characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) with energy dispersive spectroscopy (EDS) elemental mapping, X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and Fourier transmission infrared (FTIR) techniques. Trichloroethylene (TCE) degradation in various oxic environments (H2O2, CP, or... 

In this study, the enhanced trichloroethylene (TCE) degradation performance was investigated by polyvinyl alcohol coated calcium peroxide nanoparticles (PVA@nCP) as an oxidant in Fe(II)-based catalytic systems. The nanoscale iron sulfide (nFeS), having an average particle size of 115.4 nm, was synthesized in the laboratory and characterized by SEM, TEM, HR-TEM along with EDS elemental mapping, XRD, FTIR, ICP-OES, and XPS techniques. In only ferrous iron catalyzed system (PVA@nCP/Fe(II)), TCE degradation was recorded at 58.9% in 6 h. In comparison, this value was increased to 97.5% or 99.7% with the addition of citric acid (CA) or nFeS in PVA@nCP/Fe(II) system, respectively. A comparative... 

This study demonstrated the prolonged benefits of polyvinyl-coated calcium peroxide (PVA@CP) in Fe(II)/nFeS mediated Fenton-like reaction. PVA@CP was prepared by a coating of PVA on calcium peroxide (CP) and synthesized nano-sized iron sulfide (nFeS) was characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) with energy dispersive spectroscopy (EDS) elemental mapping, X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and Fourier transmission infrared (FTIR) techniques. Trichloroethylene (TCE) degradation in various oxic environments (H2O2, CP, or... 

In this study, the enhanced trichloroethylene (TCE) degradation performance was investigated by polyvinyl alcohol coated calcium peroxide nanoparticles (PVA@nCP) as an oxidant in Fe(II)-based catalytic systems. The nanoscale iron sulfide (nFeS), having an average particle size of 115.4 nm, was synthesized in the laboratory and characterized by SEM, TEM, HR-TEM along with EDS elemental mapping, XRD, FTIR, ICP-OES, and XPS techniques. In only ferrous iron catalyzed system (PVA@nCP/Fe(II)), TCE degradation was recorded at 58.9% in 6 h. In comparison, this value was increased to 97.5% or 99.7% with the addition of citric acid (CA) or nFeS in PVA@nCP/Fe(II) system, respectively. A comparative... 

This study represents the investigation of In2S3 thin films, which have been deposited with different Indium salts (Chloride, Acetate, and Nitrate) using the Chemical Spray Pyrolysis (CSP) method. The Mott-Schottky analysis has been used in case of studying the electrical properties of films such as conduction and valence band, carrier densities, Fermi level (Efn), flat band potential, and semiconductor type. In the next step, the Rb1MAFA perovskite solar cell has been simulated, and the results have been validated by the experimental data (with the least parameters for fitting). Finally, In2S3 layers have been inserted on the SnO2 layer to decrease the recombination rate and enhance the... 

We investigate the use of simple nontoxic Cu2SnS3 (CTS) nanoparticles (NPs) as low-cost dopant-free hole-transport materials (HTMs) a substitute for spiro-OMeTAD in an n-i-p mesoscopic architecture of perovskite solar cells (PSCs). Besides, this work confirms the critical role of the crystalline phase of CTS NPs on the performance of the device. Using a facile one-pot heating-up procedure, pure zincblende and wurtzite structures of CTS NPs were obtained by sulfur element and thiourea as the sulfur source, respectively, and were dispersed in chloroform to make very stable nonpolar ink that is compatible with the perovskite. Nanoparticles with the wurtzite crystal phase showed much better... 

The properties of colloidal nanoparticles are the key parameters in the fabrication of inexpensive solar cells based on the solution methods. In this study, Different nanostructures of CuInS2 (CIS) were successfully synthesized by a heating-up facile polyol-based method in which, polyols including diethylene glycol (DEG), ethylene glycol (EG), and glycerol (Gly) were chosen as both the solvent and the reductant. It is found that not only the indium precursor type but also the polyol solvent are greatly effective on the size, morphology and crystal phase of this sulfide ternary composition. Briefly, the heating-up synthesis using In(acac)3 in DEG and Gly media, created nano-sized particles... 

In this work, we reported the synthesis of a sulfonated poly(ether keto imide sulfone) (SPEKIS) using a novel aromatic diol containing nitrogen heterocycles and sulfonic monomer. New nanocomposite blend membranes were prepared using obtained SPEKIS and polybenzimidazole (PBI) with the incorporation of zinc sulfide (ZnS) functionalized quantum dots (FQDs) having both -COOH and NH2 groups with a solution-casting method and were used as proton exchange membranes. The SPEKIS and ZnS FQDs were used for the first time in the preparation of new nanocomposite blend membranes based on PBI. The purpose of this study is to investigate the effect of SPEKIS and ZnS FQDs on the PBI membrane performance in... 

Interface engineering has emerged as a great strategy for fabrication of high efficiency and stable perovskite solar cells (PSCs). Here, we deposit a thin layer of ZnS as a buffer layer at the interface of the perovskite absorber and electron transporting layer (ETL) using the atomic layer deposition (ALD) process. The impact of the ZnS layer on the photovoltaic characteristics of PSCs was investigated by comparison of two mesoscopic configurations, in which the ZnS layer is grown on compact TiO2 and on mesoporous TiO2 surfaces. Our results revealed that the addition of an ultrathin ZnS layer between the perovskite and ETL drastically improves the charge extraction properties and reduces... 

Selective oxidation of H2S to elemental sulfur is a low cost and highly efficient process for sulfur removal from H2S-containing hydrocarbon streams in medium scale (i.e. 0.2–10 ton sulfur/day) for environmental protection and prevention of emitting toxic gases to the atmosphere. In this research, in order to prepare a highly active and selective nanocatalyst for selective oxidation of hydrogen sulfide, for the first time, molybdenum oxides were loaded uniformly over nitrogen- doped carbon nanotubes through incipient wetness impregnation. Different metal loadings including 5, 10, and 15 wt% Mo were considered in the synthesis procedure to achieve the optimized performance and provide... 

Developing effective and priceless electrocatalysts is an indispensable requirement for advancing the efficiency of water splitting to get clean and sustainable fuels. Herein, we reported a feasible strategy for preparing a trimetallic (NiCoFe) superior electrocatalyst with a novel open-cage/3D frame-like structure for an oxygen evolution reaction (OER). It is prepared by consequent thermal treatments of a CoFe Prussian blue analogue frame/cage-like structure under an argon (CoFeA-TT) atmosphere and then electrochemical deposition of nickel-cobalt sulfide nanosheets as a shell layer on it. The electrochemical measurements demonstrated that the deposition of NiCo-S on CoFeA-TT... 

Efficient electron transport layers (ETLs) play a pivotal role in the performance of solar cells. In recent years, Indium sulfide (In2S3) has been studied as a promising ETL in CuInGaS(e)2, Cu2ZnSnS(e)4, and perovskite solar cells. Despite several studies on spray-deposited In2S3, there is no complete experimental investigation on In2S3 thin films. The effect of the molar ratio of S/In and the type of indium precursor on the structural, morphological, optical, and electrical properties of sprayed-In2S3 layers has been studied. Films were characterized using x-ray diffraction, scanning electron microscopy (SEM), optical transmission (UV-Vis), Mott-Schottky analysis, four-point probe, and...