Sharif Digital Repository

In this study, the influence of volumetric flow rate and inclination angle of air jet is evaluated on the performance of a Saccardo ventilation system in a straight rectangular tunnel in case of fire. Simultaneous effects of volumetric flow rate and inclination angle of jet exiting the Saccardo nozzle on the behavior of smoke plume is considered by studying the structure of velocity profile before the fire source. It is found that this factor has a remarkable influence on the behavior of smoke plume and therefore, on the temperatures experienced near the fire. Besides, the influence of tunnel slope on the performance of the Saccardo system to sweep the plume is investigated. It is shown that... 

Mixed-convection flow of nanofluids inside a vertical rectangular channel partially filled with open-cell metal foam and subject to a constant wall-heat flux was investigated experimentally and numerically. Al2O3-water nanofluids with different concentrations were prepared and their stability was examined using UV-Vis spectroscopy. Dynamic light scattering method was used to determine particle size distribution of the nanofluid feedstock. The outlet temperature and pressure drop were measured for different nanofluid flow rates (i.e., Reynolds number values). In the numerical section, a two-dimensional volume-averaged form of the governing equations was used. The velocity and temperature... 

A numerical analysis for determination of the stagnant and dispersion thermal conductivities in the Resin Transfer Molding (RTM) process is presented. A solution was obtained for the momentum and energy equations, which are used in this study and which represent the Brinkman- Forchheimer-extended Darcy model, and one-temperature energy equation. Subject to the appropriate boundary conditions, the governing equations are solved by the finite volume method on a collocated grid. In order to satisfy the pressure-velocity coupling in the solution, the SIMPLE algorithm was used and for determining the mass flux flowing past the cell faces, the Rhie-Chow interpolation was applied. Both constant and... 

In this article, mixed-convective heat transfer of nanofluids in a vertical channel partially filled with highly porous medium was studied. In the porous region, the Brinkman-Forchheimer extended Darcy model was used to describe the fluid flow pattern. Different viscous dissipation models were also applied to account for viscous heating. At the porous medium-fluid interface, interfacial coupling conditions for the fluid velocity and temperature were used to derive the analytical solution using a two-parameter perturbation method. The model used for the nanofluids incorporates the effects of Brownian motion and thermophoresis. With constant wall temperature, velocity and temperature profiles... 

The aim of this paper is to correlate interfacial heat transfer coefficient (IHTC) to applied external pressure, in which IHTC at the interface between A356 aluminum alloy and metallic mold during the solidification of casting under different pressures were obtained using the inverse heat conduction problem (IHCP) method. The method covers the expedient of comparing theoretical and experimental thermal histories. Temperature profiles obtained from thermocouples were used in a finite difference heat flow program to estimate the transient heat transfer coefficients. The new simple formula was presented for correlation between external pressure and heat transfer coefficient. Acceptable... 

In this paper, an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether (DME) from syngas. This large-scale reactor is modeled using mass and energy balances, catalyst sedimentation and single-bubble as well as two-bubbles class flow hydrodynamics. A comparison between the two hydrodynamic models through pilot plant experimental data from the literature shows that heterogeneous two-bubbles flow model is in better agreement with the experimental data than homogeneous single-bubble gas flow model. Also, by investigating the heterogeneous gas flow and axial dispersion model for small bubbles as well as the... 

The drying of saffron stigma was investigated in a laboratory infrared dryer. The effect of temperature on the drying rate of samples at various temperatures (60,70...110 °C) was studied. The drying time decreased with an increase in drying air temperature. The constant-rate period is absent from the drying curve. The drying of saffron occurred in the falling rate period. Four, thin-layer drying models, namely, Lewis, Handerson and Pabis, Page, and Midilli and Kucuk, were fitted to drying data. The performance of these models was investigated by comparing the determination of coefficient ( R2) and Root Mean Square Error (RMSE) between the observed and predicted moisture ratios. Among these... 

In this investigation, a reactor model for prediction of the deactivation behavior of MTO's porous catalyst in a fixed bed reactor is developed. Effect of coking on molecular transport in the porous structure of SAPO-34 has been simulated using the percolation theory. Thermal effects of the reaction were considered in the model and the temperature profile of the gas stream in the reactor was predicted. The predicted loss in catalyst activity with time-on-stream was in very good agreement with the experimental data. The resulting coke deposition and gas temperature profiles along the length of reactor suggested a reaction front moving toward the outlet of the fixed bed reactor at the... 

The aim of this study was to investigate the thermal behavior of Mg-doped calcium phosphate compounds. Nanocrystalline HA and β-TCP mixtures containing different magnesium contents were synthesized via an alkoxide sol gel method. The ratio of (Ca+Mg)P was kept constant at 1.67, and the Mg content ranged between 0 and 3 mol%. The influence of magnesium on the phase composition, chemical structure, thermal behavior and morphological characteristics of nanopowders was analyzed using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Simultaneous Thermogravimetry and Differential Thermal Analysis (STA/DTA), Scanning Electron Microscopy (SEM) and Transmission Electron... 

A mathematical model is developed to predict temperature variations and austenite phase transformation kinetics in steel rods and wires during controlled cooling after hot rolling. Two-dimensional finite element analysis is employed to solve the governing heat conduction equation with non-uniform boundary conditions as it is subjected in practical cooling layout. The kinetics of austenite transformation is also determined using the cooling curves achieved from the thermal analysis together with the additivity rule. To verify the model results, temperature profiles in steel rods cooled under different conditions are measured experimentally in laboratory and also, temperature history during... 

A high-order accurate implicit operator scheme is used to solve steady incompressible slip flow and heat transfer in 2D microchannels. The present methodology considers the solution of the Navier-Stokes equations using the artificial compressibility method with employing the Maxwell and Smoluchowski boundary conditions to model the slip flow and temperature jump on the walls in microchannels. Since the slip and temperature jump boundary conditions contain the derivatives of the velocity and temperature profiles, using the compact method the boundary conditions can be easily and accurately implemented. The computations are performed for a 2D microchannel and a 2D backward facing step in the... 

Three-dimensional simulation of incompressible flow in rotating tubes for both laminar and turbulent flows has been performed using a finite-volume method for elliptic flows. The influence of Reynolds number on the velocity field and the effects of temperature gradient on temperature profiles have been presented by numerical simulations. Also the effects of velocity field, flow regime, and temperature distribution along the tube have been studied from different points of view. The results have been calculated for rotational Reynolds numbers ranging from 1000 to 320,000. The comparisons between numerically calculated velocity field and the Nusselt number have shown satisfactory agreement with... 

Here we introduce a phase-shifting digital holography-based method to determine the temperature profile around an irradiated (sub-)micron spherical bead. The method utilizes a Mach-Zehnder interferometer implemented into an open setup microscope. The results of irradiated gold spheres with diameter of 400 nm and also silver-coated micron-sized silica beads embedded in silicone oil are presented. We show that the applied method is able to accurately determine the surface temperature with accuracy of 1 °C. Our experimental results perfectly confirm the theoretical prediction of temperature profile around the irradiated bead  

This study reports on the simulation of temperature distribution of human tooth under a laser beam based on non-Fourier models. The temperature in the tooth depth that directly results from the conduction heat transfer process is caused by the lengthy thermal relaxation time in the tooth layers. A detailed tooth composed of enamel, dentin, and pulp with unstructured shape, uneven boundaries, and realistic thicknesses was considered. A finite difference scheme was separately adopted to solve time-dependent equations in solid layers and soft tissue of the tooth. In this study, a dual-phase-lag non-Fourier heat conduction model was applied to evaluate temperature distribution induced by laser... 

This paper investigates numerically the problem of unsteady magnetohydrodynamic nanofluid flow and heat transfer between parallel plates due to the normal motion of the porous upper plate. The governing equations are solved via the fourth-order Runge-Kutta method. Different kind of nanoparticles is examined. The effects of kind of nanoparticle, nanofluid volume fraction, expansion ratio, Hartmann number, Reynolds number on velocity and temperature profiles are considered. Also effect of different types of nanoparticles is examined. Results indicate that velocity decreases with increase of Hartmann number due to effect of Lorentz forces. Rate of heat transfer increase with increase of... 

Climate studies and effective environmental management require unbiased climate datasets. This study develops a new bias correction approach using a three-layer feedforward neural network to reduce the biases of climate variables (temperature and precipitation) over northern South America. Air and skin temperature, specific humidity, and net longwave and shortwave radiation are used as inputs to the network for bias correction of 6-hourly temperature. Inputs to the network for bias correction of monthly precipitation are precipitation at lag 0, 1, 2, and 3 months, and also the standard deviation of precipitation from 3 × 3 neighbors around the pixel of interest. The climate model data are... 

A hybrid HDH desalination system integrated with a heat pump was experimentally studied. In this system, heat pump's heating was used to raise the temperature of the air entering the humidifier and its cooling effect was used for dehumidification of humid air and freshwater production. In other words, heat pump's condenser works as the heater of the HDH cycle and its evaporator works as the coolant for the dehumidifier of HDH cycle. The effects of different parameters such as mass flow rate of inlet saline water (relative humidity of the air passing the dehumidification section), volume flow rate of the air passing the dehumidification section and ambient air temperature on freshwater... 

Over past decades, extensive research has been performed on the measurement of land subsidence as a result of compaction of aquifer. This paper describes results from a new field-monitoring system to evaluate changes in matric suction and temperature profiles in soil layers over an extended time period. The monitoring system used in this study consists of inserting dielectric sensors into a 105 m borehole, drilled in a site in Ardabil Plain, The monitoring results from the site were used to calibrate predictions from HYDRUS-1D. The physical and hydraulic properties of the soil materials in different layers were obtained through performing some soil characteristics and filter paper tests...