Sharif Digital Repository

Synthesis and characterization of a new series of low molecular weight (MW = 500–3000) OH-terminated linear aliphatic unsaturated polyesters based on cis-2-butene-1,4-diol and oxalic to sebacic acid were investigated. Direct polycondensation and transesterification methods were used for the syntheses. The latter was recognized to be the preferable method due to its lower reaction temperature and time, lower diol/diacid ratio, absence of decarboxylation, and formation of a product with low polydispersity (Mw/Mn = 1.3–2.7). Elemental analysis, GPC, FTIR, 1H-NMR, DSC, and WAXD were used for the investigations. A segmented polyurethane based on poly (cis-2-butylene adipate) glycol was also... 

In a practical power system, automating all the substations is neither affordable nor economically justifiable. On the other hand, the trend for electric power subsidies elimination in some regions, such as Iran, aggravates this situation. To enhance the cost effectiveness of distribution automation system, this paper proposes a novel applicable qualitative-quantitative method using analytical hierarchical process (AHP) to find the optimum placement of remote terminal units (RTU). Entire attempt is to contribute all the crucial technical and practical parameters related to this problem in order to find the most reliable solution. Optimum number of RTUs is determined using the concepts of... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

This paper presents a harmonic termination technique for single-and multi-band high-efficiency class-F monolithic microwave integrated circuit (MMIC) power amplifiers (PAs). The harmonic termination network (HTN), realized with the minimum possible number of elements, can be used to terminate an arbitrary number of harmonics in a single-band PA or harmonics of multiple frequencies in a concurrent multi-band PA. The drain and gate bias lines are embedded in the HTNs to obviate the need for RF chokes and reduce the chip area. A single-and a dual-band MMIC PA are designed using the proposed technique and implemented in a 0.25-μm AlGaAs-InGaAs pHEMT technology. The single-band 5.5-GHz PA... 

There are several exact or approximating approaches that apply {m d}-MinCuts (d-MCs) to compute multistate two-Terminal reliability. Searching for and determining d-MCs in a stochastic-flow network are important for computing system reliability. Here, by investigating the existing methods and using our new results, an efficient algorithm is proposed to find all the d-MCs. The complexity of the new algorithm illustrates its efficiency in comparison with other existing algorithms. Two examples are worked out to show how the algorithm determines all the d -MCs in a network flow with unreliable nodes, and in a network flow of moderate size. Moreover, using the d-MCs found by the algorithm, the... 

In this paper, we investigate the problem of the empirical coordination in a triangular multiterminal network. A triangular multiterminal network consists of three terminals where two terminals observe two external i.i.d correlated sequences. The third terminal wishes to generate a sequence with desired empirical joint distribution. For this problem, we derive inner and outer bounds on the empirical coordination capacity region. It is shown that the capacity region of the degraded source network and the inner and outer bounds on the capacity region of the cascade multiterminal network can be directly obtained from our inner and outer bounds. For a cipher system, we establish key distribution... 

In this paper, we investigated phase synchronization in delayed dynamical networks. Non-identical spiking Hindmarsh-Rose neurons were considered as individual dynamical systems and coupled through a number of network structures such as scale-free, Erdos-Rényi, and modular. The individual neurons were coupled through excitatory chemical synapses with uniform or distributed time delays. The profile of spike phase synchrony was different when the delay was uniform across the edges as compared to the case when it was distributed, i.e., different delays for the edges. When an identical transmission delay was considered, a quasi-periodic pattern was observed in the spike phase synchrony. There... 

This paper discusses the dynamic behavior of the brushless doubly fed induction generator during the grid faults which lead to a decrease in the generator's terminal voltage. The variation of the fluxes, back EMFs, and currents are analyzed during and after the voltage dip. Furthermore, two alternative approaches are proposed to improve the generator ride-through capability using crowbar and series dynamic resistor circuits. Appropriate values for their resistances are calculated analytically. Finally, the coupled circuit model and the generator's speed and reactive power controllers are simulated to validate the theoretical results and the effectiveness of the proposed solutions. Moreover,... 

In this paper we consider the content distribution to a set of mobile users interested in the same content. We use the concept of mobile clouds, which exploits cooperation between mobile terminals over the low-power short-range links. We propose, formulate and investigate the energy efficiency and delay of four realistic cooperative content delivery strategies. The derived results, through analysis of mathematical models and simulations, demonstrate around 65% to 95% energy saving gain in mobile cloud strategies compared to conventional multicasting. We also show that using mobile clouds, content distribution delay can be reduced for up to 85%  

Conditions for an efficient ligand-free Heck C-C coupling reaction of aryl iodides and bromides with terminal olefins under aerobic conditions have been developed. Critical to the success of this new protocol is the use of palladium acetate as an extremely active catalyst for the Heck reaction in water and aqueous media. Both the base and the solvent were found to have a fundamental influence on the efficiency of the reaction, with K2CO3 and a mixture of (2:1) H2O/DMSO being the optimal base and solvent, respectively  

A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the... 

The bus network design problem is an important problem in transportation planning. It is the problem of determining a network of bus lines which best achieves a predetermined objective. This may be done with or without the presence of rapid transit lines. This study is devoted to solving this problem using genetic algorithm. The fitness function is defined as the benefit to the users of the bus network less the cost of the operator of the network, which is to be maximized subject to constraints that properly distribute bus routes over the study area. Objective function calculation depends on the basic data of the city and its bus lines and does not need traffic assignment results. So, it is... 

A major problem in real-time packet-based communication systems, is misrouted or delayed packet which results in degraded perceived voice quality. If packets are not available on time, the packets are considered lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the clean... 

In this paper, we present the bit error probability (BEP) of a relay network employing UWB links between its nodes. Since UWB systems can resolve many paths and are thus rich in multipath diversity, the use of the Rake diversity combining is very effective. However, because of the complexity, it is impractical in the scenarios with portable terminals or in the networks with multiple relays. Time-reversal technique, in which the transmitting nodes can do the pre-diversity filtering of UWB signal before transmission, is known as an approach to achieve the performance equivalent to the Rake combining without increasing the receiver complexity. The performance of such a network with simple... 

A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the clean... 

UHMWPE composite materials are increasingly used in armors design due to their high strength-to-weight ratios and energy absorption capacities. In this study the effect of production parameters upon the terminal ballistic properties of UHMWPE composite were examined under different conditionings. The composite armor plate laminates were produced by hot pressing with three different pressing times from 10-30 minutes and the laminates conditioned at +115, +125, and +135°C. The molding temperature of SK66 fiber composite has the main direct effect on the ballistic absorption energy, so the relation of molding temperature with the adhesive bonding force between layers, the thickness of the... 

Supervisory control and data acquisition (SCADA) infrastructures have so far been brought into the huge amount of focus since the need for a more reliable power system accosting with the catastrophic events of interruptions has been raised. Hence, benefiting from an automation technology which can remotely monitor and coordinate commands to enable immediate response and switching are obviously inevitable. This paper outlines an implementable method in response to the goal of placement of remote terminal units (RTUs) which are in charge for data acquisition and control in a power distribution system. In this light, a new practical methodology based on the robust decision making (DM) method,... 

Bus network design is an important problem in public transportation. In practice, some parameters of this problem are uncertain. We propose two models for the bus terminal location problem with fuzzy parameters. In the first formulation, the number of passengers corresponding to each node is a fuzzy number. In the second formulation, an additional assumption of fuzzy neighborhood is considered. These problems being NP-hard, we use a genetic algorithm (GA) and a simulated annealing (SA) algorithm for solving them. We also propose an idea to hybridize these algorithms. In our hybrid algorithm, SA is applied as a neighborhood search procedure of GA on the best individual of the population,... 

Here we report a versatile new method for endfunctionalizing polystyrene. In order to produce polystyrene with an amino end group, 2-(3-bromo-3- phenylpropyl) isoindoline-1,3-dione was synthesized and used as a novel initiator for ATRP. After ATRP polymerization, tri-n-butyltin hydride ((n-Bu) 3SnH) reductively replace existing halogens on polymer chains by hydrogen. Finally, the phthaloyl groups on polymer backbone were cleaved by treatment with hydrazine yielding amino terminated polystyrene. A polymer with M n≈10,350 and M w/M n01.17 was obtained. Therefore, this method allows the preparation of amino end functionalized polystyrene of narrow polydispersity with complete degree of... 

So far, the need for power systems to be control automated has been approached. Moreover, the advent of smart technological infrastructures calls for a more systematic and well-designed schemes for data acquisition process. Hence, Remote Terminal Units (RTUs) are going to be considered as a crucial part of smart grid puzzle in power distribution systems. This paper aims to present a novel practical approach to have the RTU placement dilemma unraveled in power distribution systems. Practically approaching in this paper, some pragmatic factors of major importance in this respect are introduced. A framework with which the utility's experts' knowledge could be efficiently exploited is presented...