Sharif Digital Repository

In this research, an attempt was made to improve TiO2 photo-catalyst properties, thus pure, N-Ce co-doped TiO2 thin films were prepared on glass-ceramic substrate using a sol-gel dip-coating technique. The samples were calcinated in air at 475 °C, 550°C, and 650°C for 2 h. The result of simultaneous thermal analysis (STA) and X-ray diffraction (XRD) showed that the presence of Ce in TiO2 could inhibit the phase transformation from anatase to rutile and enhance the thermal stability, and anatase was the dominant phase in N-Ce co-doped TiO2 samples. Also based on the results, the doping results in decreasing the size of TiO 2 crystallite. The results of ultra violet-visible light diffuse... 

The effects of SiO 2 and K 2O were investigated on the glass forming ability (GFA) and structural characteristics of CaOTiO 2P 2O 5 system. Differential thermal analyzer (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR and 31P magic angle spinning NMR methods were applied for characterizations of the system. Unwanted crystallization in the initial three components base glass composition was observed by adding SiO 2 and crystalline phases such as TiP 2O 7, rutile (TiO 2) and cristobalite (SiO 2) were formed in it. The results showed that K 2O prevents crystallization of glasses and promotes the formation of glass. FT-IR and X-ray diffraction showed that the addition... 

The productive and straightforward strategy was developed to fabricate graphene based NiFe2O4 doped rare-earth (RE) ions nanocomposites for enhancing the magnetic and structural characteristics of ferrites. RE nanoparticles (NPs) such as Yb3+, Gd3+ and Sm3+ were doped in NiFe2O4 ferrite structure via sol-gel auto-combustion method and hydrothermal method was utilized to fabricate their graphene-based nanocomposites. The weight loss and decomposition of the nanocomposites were determined using temperature-dependent thermo gravimetric analysis (TGA/DTA). The single-phase structure of the NiFe2O4, NiFe2O4/G, Yb doped NiFe2O4/G, Gd doped NiFe2O4/G, and Sm doped NiFe2O4/G nanocomposites was... 

CaO-P2O5-SiO2-Li2O-Fe2O3 magnetic bioactive glasses were prepared through an optimized sol-gel method. This study was emphasized on the effects of magnetic content addition on the bioactive glass properties. As the need arises, we study synthesized magnetic bioactive glass physical, rheological, and biocompatible properties. The morphology and composition of these glasses were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The particle size was also determined using a laser particle size analyzer (LPSA). The thermal measurements were put through using Differential thermal analysis (DTA). In order to evaluate the... 

CaO-P2O5-SiO2-Li2O-Fe2O3 magnetic bioactive glasses were prepared through an optimized sol-gel method. This study was emphasized on the effects of magnetic content addition on the bioactive glass properties. As the need arises, we study synthesized magnetic bioactive glass physical, rheological, and biocompatible properties. The morphology and composition of these glasses were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The particle size was also determined using a laser particle size analyzer (LPSA). The thermal measurements were put through using Differential thermal analysis (DTA). In order to evaluate the... 

Gradual chemical (displacement) reaction between CuO and Al powders during high-energy attrition milling under a high purity argon atmosphere was studied. Differential thermal analysis (DTA), X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques were employed to study the solid-state reaction. It was shown that the solid-state reaction occurred during mechanical alloying (MA) and resulted in the dissolution of copper into the aluminum lattice and formation of nanometric alumina particles. The reinforcement particles were mostly distributed at the grain boundaries of Al matrix with an average crystallite size of about 50 nm. In DTA curve of the milled powders, a small... 

Polylactic acid (PLA) scaffolds produced by the fused deposition modeling (FDM) method have biocompatibility, close Young's modulus to that of bone, and the ability to make complex shapes. However, PLA has some drawbacks like brittleness, inappropriate mechanical strength and hydrophobicity, and a low degradation rate. In this study, polyethylene glycol (PEG) (5 and 10 wt%) by solving method and titanium (Ti) particles (5 wt%) by two different methods were mixed with PLA to address the mentioned problems. Extruded filaments were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and fourier transform infrared (FTIR). Surface morphology of the produced filaments... 

LiCoO2 nanopowders, one of the most important cathode materials for lithium-ion batteries, were synthesized via a modified sol-gel process assisted with triethanolamine (TEA) as a complexing agent. The influence of three different chelating agents including acrylic acid, citric acid, and oxalic acid on the size and morphology of particles was investigated. Structure and morphology of the synthesized powders were characterized by thermogravimetric/ differential thermal analyses (TG/DTA), X-ray diffraction (XRD), and transmission electron microscopy (TEM). Results indicate that the powder processed with TEA and calcinated at 800 °C had an excellent hexagonal ordering of α-NaFeO2 -type (space... 

In the current research, a cost-effective and modified method with a high degree of reproducibility was proposed for the preparation of fine nanoscale and high-purity BaTiO3. In contrast to the other established methods, in this research, carbonate-free BaTiO3 nanopowders were prepared at a lower temperature and in a shorter time span. To reach an in-depth understanding of the scientific basis of the proposed process, an in-detail analysis was carried out for characterization of nanoscale BaTiO3 particles via differential thermal analysis (DTA)/thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and... 

Two series of heat-resistant 25Cr-35Ni-Nb stainless steels with tungsten addition and Nb/C ratio of ≈2.6 and 3.9 were directionally solidified under two cooling rates of 23–6 °C s−1, respectively. EDS analysis, electron backscatter diffraction (EBSD), differential thermal analysis (DTA) and field emission scanning electron microscopy (FESEM) tests were carried out to show that tungsten as a carbide phase nucleant promoted weak coupled eutectic growth of γ/ M7C3 and decreased the lamellar eutectic colonies. Substantial negative segregation of Ni and Fe and positive segregation of Nb and Cr in tungsten-bearing alloys stimulated the γ/M23C6 reaction and the M23C6 possessed a dendritic... 

Abstract In this study, aluminium titanate (AT) particles and nanofibers were synthesized through citrate sol gel and sol gel-assisted electrospinning methods in both nanostructured powder and nanofiber forms. The results of X-ray diffraction analysis, field-emission scanning electron microscopy and differential thermal analysis showed that the synthetic products benefit a nanostructured nature with a grain size less than 70 nm. The optimal values for time and temperature at which a roughly pure AT is attained were determined as 2 h and 900 C, respectively. It was found that the sol gel precursor bears an amorphous structure till 700 C and begins to be crystallized to alumina, anatase and AT... 

In this paper, the transient growth of a spherical micro-void under remote thermal load in an infinite medium is investigated. After developing the governing equations in the problem domain, the coupled nonlinear set of equations is solved through a numerical scheme. It is shown that a small cavity can grow rapidly as the temperature increases in a remote distance and may damage the material containing preexisting micro-voids. Conducting a transient thermal analysis simultaneously with a structural one reveals that the material may experience a peak in the radial stress distribution, which is five times larger compared to the steady-state one, and shows the importance of employing a... 

A new facile strategy for fabrication of high surface area electrode in the form of mixtures of coated carbon nanotubes (CNTs) and TiO2 nanoparticles with various weight ratios is reported. The so-called polymeric gel process was used to deposit thick film containing uniform distribution of TiO2 nanoparticles and coated CNTs with high porosity by dip coating for dye-sensitized solar cells (DSSCs) applications. Based on simultaneous differential thermal analysis, the minimum annealing temperature to obtain inorganic- and organic-free films was determined at 500°C. X-ray diffraction analysis revealed that deposited films were composed of primary nanoparticles with crystallite size in the range... 

The morphological, physical and mechanical properties of polypropylene/clay nanocomposites (PPCNs) were prepared by in situ polymerization are investigated. Non-modified scmectite type clay (e.g. bentonite) was used to prepare bi-supported Ziegler-Natta catalyst of TiCl4/Mg(OEt)2/clay. Exfoliated PPCNs were obtained by in situ intercalative polymerization of propylene using produced bi-supported catalyst. X-ray diffraction (XRD) patterns and transmission electron microscopy (TEM) micrograph were used to assess the clay morphology and dispersion of clay. The crystalline structures of PPCNs were characterized by differential scanning calorimetry (DSC). The mechanical properties of PPCNs were... 

Charge-transfer (CT) complexes formed from the reactions of 4-nitropyrocatechol (4-nCat) as an electron acceptor with four amino alcohols: 2-aminoethanol, 1-amino-2-propanol, 4-aminobutanol and N-(2-hydroxyethyl)-1,3-diaminopropane (NHEDAP) as electron donors, have been studied spectrophotometrically in H2O and H2O/EtOH at 20, 25, 30, 35 and 40 °C. The calculated values of the oscillator strength and transition moment confirm the formation of CT-complexes. The thermodynamic and spectroscopic parameters were also evaluated for the formation of CT-complexes. The equilibrium constants ranged from 9.00 to 2.20 l mol-1 (M-1). These interactions are exothermic and have relatively large standard... 

In this study, the potential of using MIL-100(Fe) metal–organic framework (MOF) for loading and controlling the release of dacarbazine (DTIC) was evaluated for in vitro treatment of melanoma. The drug loading was performed during the green synthesis of MIL-100(Fe) in an aqueous media without using any harmful solvents, to obtain MIL-DTIC. The surface of this structure was then coated with polyethylene glycol (PEG) in the same aqueous solution to synthesize MIL-DTIC-PEG. The synthesized samples were characterized using various methods. Their release profile was studied in phosphate-buffered saline (PBS) and simulated cutaneous medium (SCM). The cytotoxicity of DTIC and its nano-MOF... 

NaY zeolite nanoparticles were synthesized and shaped into the uniform spherical granules using a developed novel and simple two-step granulation technique. First, the alginate/nanozeolite or alginate/nanozeolite-bentonite spherical hybrid was successfully fabricated, and then the alginate was decomposed by calcinations resulting uniform spherical granules. To improve the mechanical stability of the prepared granules, bentonite was added as an inorganic binder at different ratios of 20wt.% to 40wt.%. Moreover, the effect of binder on the ion exchange properties of the prepared granules was studied. Increasing of binder content from 20wt.% to 40wt.% linearly enhanced the mechanical stability... 

Cadmium sulfide (CdS) with different morphologies was successfully prepared by solvothermal process by controlling the processing parameters, including nature of precursor and solvent, reaction temperature and process time. X-ray diffraction patterns revealed that, in all cases highly pure and crystallized CdS with hexagonal structure were obtained. In addition, it was found that the processing parameters influence on preferable growth direction of CdS nanostructures. Field emission scanning electron microscope analysis showed that CdS nanowires with different aspect ratios were obtained (depending upon the reaction temperature and process time) in presence of sulfur powder and... 

SAPO-34 zeolite-like particles were successfully synthesized at high temperature environment. An L9 orthogonal array of the Taguchi method was implemented to investigate the effects of experimental conditions to prepare SAPO-34 with respect to crystallinity of the final product phase. The results showed that the favorable phase crystallinity was improved by increasing the hydrothermal synthesis temperature and organic template content, whereas increasing the water content in synthesis mixture decreased the crystallinity. No significant changes in crystallinity of the final products were observed by increasing the synthesis duration. In addition, zeolite SAPO-5, which was formed as the... 

This article examines the physical and mechanical characteristics of mixtures of two different synthetic rubbers, namely styrene-butadiene rubber (SBR) and nitril-butadiene rubber (NBR), with novolac type phenolicresin (PH). According to Taguchi experimental design method, it is shown that the addition of PH increases the crosslinking density of rubber phase probably due to its curative effects. Thermal analysis of the blends indicates that, contrary to NBR/PH blend, thermal stability of SBR/PH blend is dependent on sulfur content due to predominant polysulfidic crosslinks formed in SBR. Slight shift in glass-transition temperature (Tg) of pure SBR and NBR vulcanizates by the addition of PH...