Sharif Digital Repository

Concrete-filled polyethylene (PE) tubes (CFPT) are composite systems using the polyethylene tubes as confinement for the marine structures in the splash zone to extend the service life of structures subjected to harsh environments. However, thermal cycles in marine environments can affect the behavior of such composite systems. This paper evaluates the effect of concrete infill strength (30 MPa and 60 MPa), the number of thermal cycles (50, 100, and 150 cycles) ranging from 25 °C to 60 °C, and thermal cycle type (type A and B) on the compressive and bond response of CFPTs. Characteristics of control and conditioned concrete infill, PE tubes, and CFPTs were obtained by means of compression... 

Nucleic acid amplification using polymerase chain reaction (PCR) method has been widely used in different fields such as agricultural science, medicine, pathogen identification, and forensics to name a few. Today, it seems inevitable to have a robust, simple PCR system for diagnostics at the point-of-care (POC) level. Many photonic PCR systems have been proposed in the literature that benefit from plasmonic photothermal heating to achieve the common PCR thermal cycling. However, non-homogeneous temperature distribution is a challenge in some of them. In the present work, to achieve more efficient gene amplification, the effect of adding TiO2 nanoparticles has been investigated in a photonic... 

Nucleic acid amplification using polymerase chain reaction (PCR) method has been widely used in different fields such as agricultural science, medicine, pathogen identification, and forensics to name a few. Today, it seems inevitable to have a robust, simple PCR system for diagnostics at the point-of-care (POC) level. Many photonic PCR systems have been proposed in the literature that benefit from plasmonic photothermal heating to achieve the common PCR thermal cycling. However, non-homogeneous temperature distribution is a challenge in some of them. In the present work, to achieve more efficient gene amplification, the effect of adding TiO2 nanoparticles has been investigated in a photonic... 

A numerical analysis is improved to study the effect of vibration on temperature history, heat generation, and mechanical properties during the friction stir welding process with different welding speeds. In this investigation, smoothed particle hydrodynamics (SPH) was applied to improve the 3D numerical analysis for simulation of the friction stir welding (FSW) process and friction stir vibration welding (FSVW) under different welding speeds. According to the experimental analysis, the grain size of the FSVW-ed sample is finer compared with that of the FSW-ed sample. The analysis was validated through a comparison of the simulated thermal cycles with the experimental results. There was a... 

Space environments have a significant influence on advanced composite structures and adhesive joints. Degradation in the mechanical properties of aerospace materials changes the dynamic behavior of the structures and adhesive joints. In this paper, a typical tubular adhesive joint with material degradation due to geostationary orbit (GEO) thermal cycles has been studied numerically with Python scripts. Adhesive joint geometry and boundary conditions are the main parametric study parameters. The results show that the first non–zero natural frequencies of the clamped-free tubular adhesive joint decreased due to mechanical property degradation. A dynamic behavior comparison of the degradation... 

This study aims at understanding the metallurgical and mechanical response of Hastelloy X nickel-based superalloy to the thermal cycle of gas tungsten arc welding (GTAW), post welding solution treatment (ST), and aging. In the as-weld condition, the weldment was characterized by the formation of the M6C carbide, sigma phase, and micro-solidification cracks in the interdendritic zones of the weld metal, and constitutional liquation of M6C carbide in the heat-affected zone. It is demonstrated that neither the weld metal nor the heat-affected zone could adversely affect mechanical properties of the welded joint in as-weld condition. However, to alleviate the microstructural heterogeneity,... 

Energy piles have been used around the world to harvest geothermal energy to heat and cool residential and commercial buildings. In order to design energy geo-structures, thermo-mechanical response of the geothermal pile must be carefully understood. In this paper, a small scale physical model is designed and a series of heating thermal cycles with various vertical mechanical loads are performed. The instrumented pile is installed inside a dry sand bed. Changes in pile head displacement, shaft strains and pile and sand temperatures are monitored using an LVDT, strain gauges and thermocouples, respectively. Prolonged heating cycles, which would continue until boundary temperature changes,... 

The effect of welding current and polarity, i.e. AC and DCEN, on imposed thermal cycles, mechanical properties, microstructural events and residual stresses was investigated in GTA welding of AA5052. A three-dimensional thermo-mechanical model was utilized to evaluate thermal responses and residual stresses distribution in the weldments. Tensile testing and hardness measurements were also conducted to study the effect of welding polarity on the mechanical properties of components. Microstructural observations utilizing optical microscopy were carried out to assess the microstructural evolutions. The results show that wide varieties of microstructures are produced in DCEN sample from cells at... 

This study investigates the effect of Thermal cycles on the mechanical properties of GFRP pultruded profiles with different geometries. Bending specimens consisted of I-shaped and U-channel profiles that were tested in three-point bending along their both principal weak and strong axes, whereas box profiles and laminates were used in compression and tension tests, respectively. Each specimen was exposed to a range of thermal cycles, between −20 °C and 20 °C. The failure modes of the profiles were closely investigated at both major and minor scales. Results were analyzed using ANOVA to determine the influence of each factor and a model was developed to predict the strength retention of... 

Nucleic acid amplification via polymerase chain reaction (PCR) is one of the essential and powerful methods used in a myriad of bio-assays in clinical laboratories. Application of microfluidic devices in biologically-related processes like PCR can result in the usage of less volume of reactant samples and reduce the processing time. By implementing PCR systems on centrifugal microfluidic platforms, automation and portability can be easily achieved. Although several methods have been developed, most of them are still dealing with challenges of the required high processing time. This study presents the numerical simulation of a fully automated PCR system with the goal of enhancing the mixing... 

In this study, the effects of stress-assisted heat treatment on the microstructure and phase transformation of a Ti-rich (Ti-49.52 at.% Ni) shape memory alloy were investigated. For this purpose, the alloy was heat treated at temperature of 500 °C for 10 h under applied stresses of 100 and 200 MPa. XRD, TEM, and repeated thermal cycling were employed to study the microstructure and transformation behavior of the heat-treated materials. Room temperature XRD diffractogram of the stress-free heat-treated material showed a weak reflection of austenite (B2), while that for the stress-assisted heat-treated materials had a high intensity implying the presence of residual austenite in the... 

In aerospace applications structures weight is considered as a major performance parameter. One of the most effective manufacturing methods for weight reduction is superplastic forming. By this technique, not only the weight, but also the stress concentration, the cost, and the manufacturing time are noticeably reduced. Additionally, the components with complicated shapes could be formed in a single manufacturing step. Due to the wide demand for whiskers reinforced metal matrix composites (MMCs) in aerospace industries, many research works have been designed to extend the borders of superplastic forming to MMCs materials. In the present study, a 3-D symmetric micromechanical finite element... 

The objective of this paper is to study the influence of the second peak temperature during real and simulated welding on properties of the subcritically (S), intercritically (IC) and supercritically (SC) reheated coarse grained heat affected (CGHAZ) zones. The X80 high strength pipeline microalloyed steel was subject to processing in a double-pass tandem submerged arc welding process with total heat input of 6.98 kJ/mm and thermal cycles to simulate microstructure of reheated CGHAZ zones. This involved heating to a first peak temperature (TP1) of 1400 °C, then reheating to different second peak temperatures (TP2) of 700, 800 and 900 °C with a constant cooling rate of 3.75 °C/s. Toughness of... 

In this work, temperature field and weld pool geometry during gas tungsten arc welding of 304 stainless steel are predicted by solving the governing equations of heat transfer and fluid flow under quasi-steady state conditions. The model is based on numerical solution of the equations of conservation of mass, momentum, and energy in the weld pool. Weld pool geometry, weld thermal cycles, and various solidification parameters are then calculated by means of the model predictions. The model considers the effects of various process parameters including welding speed and heat input. It is found that the weld pool geometry, predicted by the proposed model, is in reasonable agreement with the... 

In the present study, the temperature and the velocity fields during gas tungsten arc welding of commercial pure aluminum were simulated using the solution of the equations of conversation of mass, energy and momentum in three dimensions and under steady-state heat transfer and fluid flow conditions. Then, by means of the prediction of temperature and velocity distributions, the weld pool geometry, weld thermal cycles and various solidification parameters were calculated. To verify the modeling results, welding experiments were conducted on two samples with different thicknesses and the geometry of the weld pool was measured. It is found that there is a good agreement between the predicted... 

A mathematical model is developed to assess the solidification behaviour of the weld pools. To do so, during gas tungsten arc welding of commercial pure aluminium, equations of conversation of mass, energy and momentum are numerically solved considering three-dimensional steady state heat transfer and fluid flow conditions. The weld pool geometry, weld thermal cycles and various solidification parameters are calculated using temperature and velocity fields acquiring from the utilised model. The solidification behaviour of the weld pool at the weld centreline and the fusion line is then studied using the solidification parameters including temperature gradient G, solidification rate R and the... 

Aluminum alloy series 5xxx lose their strength, especially in the heat affected zone (HAZ) of welds, due to thermal cycle during welding process. Because of this thermal cycle, re-crystallization and grain coarsening in HAZ occur, which result in decreasing of mechanical properties. In this paper the influence of "overloading" and "shot peening" as methods of post weld treatment on mechanical properties of AA5083 aluminum alloy welded joints is investigated. The results show that both overloading and shot peening treatments increase the hardness and tensile strength of welded joints. It is observed that the influence of overloading is stronger than shot peening on increasing hardness of the... 

Current researches on the development of gas turbine related power plants such as HAT cycle and Combined Cycle are aimed to increase the plant efficiency and output power, while reducing the cost of power generation and emission. Humid air turbine cycle (HAT) is one of innovative cycles, which are able to provide a substantial power boost of the system and an efficiency rise of several percentage points. In order to perform energy analysis of Full Flow HAT cycle and Part Flow HAT cycle an advanced thermodynamic model is developed, which is enabling evaluation of behavior of Full Flow and Part Flow Humid Air Turbines and predicting the influence of operational parameters in the performance of...