Sharif Digital Repository

Solids usually show complex material behavior. If deformation is finite, the description of the kinematics makes the mechanical model complicated. In fact, one of the basic questions in the formulation and analysis procedures of finite deformation thermoelasticity is: "How can the finite deformation thermoelasticity response be best accounted for in the kinematic formulation?" A rather attractive way to proceed is to use the approach of small strain analysis, and decompose the total strain into a mechanical part and a thermal part. In this paper, based on the multiplicative decomposition of the deformation gradient, the mechanical and thermal strains are defined in the power and exponential... 

The concern over fossil energy shortage for the next decade leads to the extensive research activities in the area of enhanced oil recovery. Steam injection as one of well known EOR process has been used for about five decades to improve the oil production rate and recovery efficiency. Steam flooding is applied to heavy and extra-heavy oil reservoirs; however it could be used in light oil reservoirs in which water injection do not work effectively. Regardless of different performances, this method is an efficient EOR process for both heavy and light oil reservoirs. In this work, two separate numerical models were prepared to investigate steam flooding performance for the recovery of light... 

Prediction of the thermo-mechanical behavior of machine-tool spindles is essential in the reliable operation of high speed machine tools. In particular, the performance of these high speed spindles is dependent on their thermal behavior. The main source of heat generation in the spindle is the friction torque in angular contact ball bearings. This paper presents an effort to develop a comprehensive model of high speed spindles that includes viable models for the mechanical and thermal behavior of its major components, i.e., bearings, shaft and housing. Spindle housing and shaft are treated as six-degree-of-freedom Timoshenko beam elements. Bearings are modeled as two-node elements with five... 

The properties of W-15 wt.%Cu composites were investigated by preparing two distinct composites of micrometer and nanoscale structures. Micrometer composite was produced by mixing elemental W and Cu powders and nanometer one was synthesized through a mechanochemical reaction between WO3 and CuO powders. Subsequent compaction and sintering process was performed to ensure maximum possible densification at 1000-1200 °C temperatures. Finally, the behavior of produced samples including relative density, hardness, compressive strength, electrical conductivity, coefficient of thermal expansion (CTE) and room temperature corrosion resistance were examined. Among the composites, nano-structured... 

We present an approach for constant-pressure molecular dynamics simulations. This approach is especially designed for finite systems, for which no periodic boundary condition applies. A molecular dynamics (MD) simulation for Ni nanoclusters is used to calculate their pressurevolumetemperature (pvT) data for the temperature range 200 K≤T≤400 K, and pressures up to 600 kbar. Isothermal sets of pvT data were generated by the simulation; each set was fitted by three equations of state (EoSs): Linear Isotherm Regularity-II (LIRII), BirchMurnaghan (BM), and EOS III. It is found that the MD data are satisfactorily reproduced by the EoSs with reasonable precision. Some features of the EoSs criteria,... 

In the present paper, radial and hoop thermal and mechanical stress analysis of a rotating disk made of functionally graded material (FGM) with variable thickness is carried out by using finite element method (FEM). To model the disk by FEM, one-dimensional two-degree elements with three nodes are used. It is assumed that the material properties, such as elastic modulus, Poisson's ratio and thermal expansion coefficient, are considered to vary using a power law function in the radial direction. The geometrical and boundary conditions are in the shape of two models including thermal stress (model-A) and mechanical stress (model-B). In model-A there exists no pressure in both external and... 

In the present work, accumulative roll bonding (ARB) was used as an effective method for manufacturing nanoparticle/Al composite filler metals of tungsten inert gas (TIG) welding. After welding, the distribution of ceramic nanoparticles and mechanical properties of welds were investigated. By applying ARB, ceramic nanoparticles were uniformly dispersed in the composite filler metals. Consequently, the welds produced by these filler metals had a uniform dispersion of ceramic nanoparticles in their compositions. The test results showed that the yield strength of welds was greatly increased when using the nanoparticle/Al composite filler metals. The improvement in the yield strength was... 

CuCo2O4 spinel nanopowders were synthesized by sol–gel method. The optimal values of pH and molar ratio of citric acid to metal ions (RC), and the influence of the calcination temperature and time were investigated. As-prepared materials were characterized by XRD, TGA, DSC, FE-SEM and electrical and coefficient of thermal expansion (CTE) measurements. It was found that pH = 4.5 and RC = 1 are the optimum conditions to produce pure CuCo2O4 nanopowders. The electrical conductivity was increased remarkably from 15.2 to 27.5 S cm−1 with an increase in temperature from 500 to 800 °C. Over the temperature range of 25–800 °C, the CTE of... 

This paper is concerned with the stability analysis of bridged single walled carbon nanotubes (SWCNT) under temperature changes. A molecular structural mechanics model is utilized to investigate the free vibration frequencies and thermal buckling of SWCNT. In comparison with most of the previous studies, a temperature-variable thermal-expansion-coefficient is used that is negative under a certain temperature. Also thermal variation of Young's modulus of the CNTs is considered. Several studies are performed to investigate the critical temperature change due to heating and cooling of SWCNTs with different chiralities and slenderness ratios and the stability boundaries are determined  

In this paper, using the multiplicative decomposition of the deformation gradient into mechanical and thermal parts, both kinematic and kinetic aspects of finite deformation thermoelasticity are considered. At first, the kinematics of the thermoelastic continua in the purely thermal process of nonisothermal deformation is investigated for finite deformation thermoelasticity. Also, a linear relation between the thermal expansion tensor and the rate of the thermal deformation tensor is presented. In order to model the mechanical behavior of thermoelastic continua in the stress-producing process of nonisothermal deformation, an isothermal effective stress-strain equation based on the... 

In this paper, nonlinear radial and hoop thermoelastic stress analysis of rotating disk made of functionally graded material (FGM) with variable thickness is carried out by using the finite element method. In this method, one-dimensional second order elements with three nodes have been used. The geometrical and boundary conditions are in the shape of nonexistence of the pressure (zero radial stress) in both external and internal layers and zero displacement at the internal layer of rotating disk. Furthermore, it's assumed that heat distribution is as second order curve while material properties such as elasticity modulus, Poisson's ratio and thermal expansion coefficient vary by using a... 

Due to the growing applications of silicon in nano-scale systems, a molecular dynamics approach is employed to investigate thermal properties of silicon. Since simulation results rely upon interatomic potentials, thermal expansion coefficient (TEC) and lattice constant of bulk silicon have been obtained using different potentials (SW, Tersoff, MEAM, and EDIP) and results indicate that SW has a better agreement with the experimental observations. To investigate effect of size on TEC of silicon nanowires, further simulations are performed using SW potential. To this end, silicon nanowires of different sizes are examined and their TEC is calculated by averaging in different directions ([100],... 

A finite element analysis of a double layered shell with a circular hole is carried out with the computer aided engineering software Abaqus (Dassault Systèmes, FR). The model proposed has been used to perform a stress analysis on three pipes with different sized hole. Moreover, thermal expansion has been implemented in the testing. For the purpose of the research, the elastic properties of the materials have been considered and the results compared with the ones previously published in literature. The outcome of the investigation will benefit towards the design of optimal and sustainable pipes with circular cut outs  

In manufacturing amorphous silicon solar cells, thin films are deposited at high temperatures (200-400 °C) on a thick substrate using sputtering and plasma enhanced chemical vapor deposition (PECVD) methods. Since the thin films and substrate have different thermal expansion coefficients, cooling the system from deposition temperature to room temperature induces thermal residual stresses in both the films and substrate. In addition, these stresses, especially those having been induced in the amorphous silicon layer can change the carrier mobility and band gap energy of the silicon and consequently affect the solar cell efficiency. In this paper, a 2D finite element model is proposed to... 

A thermo-elastic analysis coupled with a phase change model is employed to evaluate thermal stresses as well as progress of austenite decomposition after hot strip rolling operations. The thermo-mechanical finite element analysis is utilized to assess the distributions of temperature and thermal stresses during cooling while at the same time, a model based on the additivity rule is used to determine the rate of austenite to ferrite decomposition. The proposed model is applicable to multi-pass rolling schedules while the effects of different process parameters including the rolling speed and cooling configuration of the run-out table can be taken into account. In order to verify the... 

Three-dimensional thermo-mechanical stress analysis of composite joints with bi-adhesive bonding is presented using the full layerwise theory. Based on three-dimensional elasticity theory, sets of fully coupled governing differential equations are derived using the principle of minimum total potential energy and are simultaneously solved using the state space approach. Results show that bi-adhesive bonding substantially relieves the edge effects. Moreover, series of parametric studies reveal the nonlinear effects of bonding length ratio and the relative stiffness and coefficient of thermal expansion of the mid- and side-adhesives. It is also concluded that the optimum design of a bi-adhesive... 

LM13 alloy is widely used in piston industry, due to its low coefficient of thermal expansion, excellent castability and hot tear resistance. In this research effect of casting process on wear behavior of LM13 alloy was investigated. First, samples were produced using two casting processes and heat treated. Then wear behavior of these samples under dry sliding condition was examined. Results of hardness and strength tests indicated that squeeze cast specimens exhibited higher mechanical properties. Wear experiment results showed that in both squeeze and gravity cast specimens, amount of weight loss increases with increase in sliding distance which is accompanied by reduction in wear rate and...