Sharif Digital Repository

This paper simulates Al2O3-water nanofluid flow and forced convection around a rotating circular cylinder. The governing parameters are Reynolds number (1 ≤ Re ≤ 100), solid volume fraction of nanoparticles (0 ≤ φ ≤ 0.05) and non-dimensional rotation rate (0 ≤ α ≤ 3). The simulations are performed to study the effects of mentioned parameters on the heat transfer rate and fluid flow characteristics. The governing equations including the continuity, momentum, and energy equations are solved with a finite volume method. It is observed that the reduction of heat transfer with increase in rotation rate is in the vicinity of 6.9% and 32% for Re = 5 and 100, respectively at φ = 0.05. Furthermore,... 

In this study, an experimental investigation was conducted from a thermal performance standpoint on closed-loop pulsating heat pipes (CLPHPs) with four different fluids and their water-based binary mixtures as working fluids with volume mixing ratios of 3:1, 1:1, and 1:3. Ethanol and acetone as two types of fluids that are soluble in water and, to unprecedentedly compare the behavior of insoluble mixtures with the soluble ones as the working fluids, toluene and hexane as two types that are insoluble in water were used. Additionally, to predict the thermal performance of the pure, soluble binary, and insoluble binary fluids simultaneously for the first time, a correlation was derived. © 2018... 

In this study, an experimental investigation was conducted from a thermal performance standpoint on closed-loop pulsating heat pipes (CLPHPs) with four different fluids and their water-based binary mixtures as working fluids with volume mixing ratios of 3:1, 1:1, and 1:3. Ethanol and acetone as two types of fluids that are soluble in water and, to unprecedentedly compare the behavior of insoluble mixtures with the soluble ones as the working fluids, toluene and hexane as two types that are insoluble in water were used. Additionally, to predict the thermal performance of the pure, soluble binary, and insoluble binary fluids simultaneously for the first time, a correlation was derived. © 2018,... 

The exploitation of solar energy facilitates the renewable energy paradigm. In this regard, parabolic trough collectors (PTC) are considered as a useful set-up to absorb solar energy. Simultaneous study of thermal, thermodynamic, and exergoeconomic performance of PTC systems paves the way for designers and manufacturers to not only have a better insight into understanding the underlying concepts about the operation of PTC systems but also to find the most effective and cost-effective circumstances. This study aims at analyzing a practical PTC system by considering an evacuated absorber tube with glass cover, non-uniform heat flux, and taking into account the convective and radiative heat... 

In the present research an experimental investigation is performed to explore the effects of working fluid, heat input, ferrofluid concentration, magnets location, and inclination angle on the thermal performance of an Open Loop Pulsating Heat Pipe (OLPHP). Obtained results show that using ferrofluid can improve the thermal performance and applying a magnetic field on the water based ferrofluid decreases the thermal resistance. It shows that at an inclination angle of the OLPHP to be zero, the thermal performance of the present OLPHP reduces. Best heat transfer capability was achieved at 67.5 degree relative to horizontal axis for all of working fluids. Variation of the magnets location... 

Pulsating heat pipes are complex heat transfer devices, and their optimum thermal performance is largely dependent on different parameters. In this paper, in order to investigate these parameters, first a closed-loop pulsating heat pipe (CLPHP) was designed and manufactured. The CLPHP was made of copper tubes with internal diameters of 1.8 mm. The lengths of the evaporator, adiabatic, and condenser sections were 60, 150, and 60 mm, respectively. Afterward, the effect of various parameters, including the working fluid (water and ethanol), the volumetric filling ratio (30%, 40%, 50%, 70%, 80%), and the input heat power (5 to 70 W), on the thermal performance of the CLPHP was investigated... 

Standpoints about atrium design have been revolutionized. Nowadays, design of atrium is not only for shine of light, but is also for natural ventilation as well. In high rise building, residents have not a same advantage of buoyancy-driven ventilation that arising from existence of atrium. One strategy to more equalize ventilation and thermal comfort in different levels, is designing building with various opening area in different heights. Present study aims to overcome the problem by changing the atrium shape. Thus, the atrium's wall angularity is changed in different case studies and these shapes are compared with each other in order to find the relations between atrium wall angularity and... 

In addition to some approaches such as changing the working fluid or number of turns in a flat-plate pulsating heat pipe (FP-PHP), geometrical changes are also appealing for enhancing the thermal performance of this type of heat pipes. The main idea of this investigation is to increase heat transfer rate by increasing flow circulation of working fluid. By placing additional branches in the evaporator section, secondary bubble pumps were created which improved the circulation of fluid inside the FP-PHP. In order to investigate the impact of these additional branches, two similar four-turn aluminum FP-PHPs were fabricated. One of them was the conventional FP-PHP and the other had four... 

In the current research, a three-dimensional photovoltaic thermal system integrated with phase change material system with nanofluids is investigated. The working fluids involved in this study include nano-magnesium oxide, multiwall carbon nano tube and hybrid (mixture of nano-magnesium oxide and nano-multiwall carbon nano tube) nanofluids dispersed in pure water. After comparing single-phase model and mixture model, the mixture model is used in the study and fluid flow regime in the collector is assumed to be laminar, fully develop, uniform and incompressible, to model the nanofluid in the system. A parametric analysis is conducted to examine the effect of various parameters such as working... 

This work is dedicated to finding a suitable measure to judge thermal performance of nanofluids. The importance of this issue arises from misleading claim of excess heat transfer of nanofluids compared to the base fluid, neglecting the hydraulic effects such as increase in pressure drop. To clarify the issue, the experimental setup with capability to create constant Reynolds number and constant pumping power is constructed. Thermal behavior of nanofluids of silicon oxide/water and aluminum oxide/water and distilled water in developing region of laminar flow regime is investigated. In this regard, the convective heat transfer coefficient within the finned tube heat exchanger is evaluated.... 

In this paper, new arrangements of triangular winglet as a turbulator are numerically studied through a cylindrical tube. Triangular winglets are commonly placed on one side of a rectangular plate and inserted inside the tube. However, in present work, the winglets are located on both sides of the rectangular plate to further enhance the thermal performance of the fluid flow through the tube. Both backward and forward configurations of the winglets are analysed. Moreover, despite the importance of “latitudinal pitch of the winglets” and “winglet-plate angle” no investigation has been evaluated these parameters which will be evaluated in this work. Moreover, as no exergetic evaluation has... 

Pulsating heat pipes are cooling devices that are partially filled with working fluid. Working fluid thermophysical properties affect the thermal performance of pulsating heat pipes. In this research, the effect of adding a Triton X-100 surfactant to pure water and using the mixture as a working fluid is investigated experimentally. The results indicate that adding surfactant leads to improvement in the thermal performance of the pulsating heat pipe. In particular, the maximum of the thermal resistance improvement is about 61%, which is attributed to 0.01% surfactant concentration. Higher heat transfer ability is attributed to lower surface tension and the contact angle of the mixture... 

Pulsating heat pipes (PHPs) are heat transfer devices which are widely utilized in electronic devices and energy systems. Improvement in thermal performance of PHPs will lead to higher heat transfer capacity and enhancement in the efficiency of systems which PHPs are applied. In this study, an experimental investigation was performed on the thermal performance of a pulsating heat pipe by applying graphene oxide nanofluid as working fluid. Four concentrations of graphene oxide (0.25, 0.5, 1, and 1.5 g/lit) in water as base fluid were used in the PHP. Results indicate that adding graphene oxide sheets increased thermal conductivity and viscidity of the base fluid. Moreover, utilizing graphene... 

Nanotechnology is widely used in heat transfer devices to improve thermal performance. Nanofluids can be applied in heat pipes to decrease thermal resistance and achieve a higher heat transfer capability. In the present article, a comprehensive literature review is performed on the nanofluids’ applications in heat pipes. Based on reviewed studies, nanofluids have a high capacity to boost the thermal behavior of various types of heat pipes such as conventional heat pipes, pulsating heat pipes, and thermosyphons. Besides, it is observed that there must be a selected amount of concentration for the high-performance utilization of nanoparticles; high concentration of nanoparticles causes a...