Sharif Digital Repository

In this study, the effects of unmodified calcium zinc phosphate (UCZP) and modified calcium zinc phosphate (MCZP) nanopigments (NPs) on the rheological, mechanical, and corrosion protection performance (CPP) of the epoxy (EP) coatings were investigated. Transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to study morphology and overall chemical structure of synthesized calcium zinc phosphate (CZP) NPs, respectively. The grafting of methyltriethoxysilane (MTES) molecules on the surface of CZP was assessed using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and... 

Incorporating titanium dioxide (TiO2) nanoparticles into the polymeric matrix offers an opportunity to obtain nanocomposites with improved functionality. In this study, the commercial TiO2 nanoparticles (TNP) were surface treated by different concentrations of aminopropyl triethoxy silane (APTS) as a coupling agent and triethylamine (Et3N) as a surface grafting catalyst by an aqueous process to prepare a nanocomposite with superior properties. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were performed to confirm the successful surface modification of TNP. The prepared modified TiO2 nanoparticles (mTNP) with different weight fractions were used as... 

Gadolinium (Gd) and cobalt (Co) substituted Sr–Ba–Cu-based Y-type hexaferrites were synthesized with the help of the sol–gel auto-combustion route. XRD (X-ray diffraction) analysis was done to ratify the phase formation of hexaferrites. The impact of Gd3+ substitutions was measured on all the lattice parameters. Lattice constants “a” and “c” were found between 5.879–5.891 Å and 43.185–43.620 Å, respectively. It was observed from the XRD analysis that with an increase in Gd–Co contents, the enhancement in the average crystallite size is noted. The thermal decomposition process was studied using TGA (thermogravimetric analysis), revealing that the precursor may give the ending product when... 

The productive and straightforward strategy was developed to fabricate graphene based NiFe2O4 doped rare-earth (RE) ions nanocomposites for enhancing the magnetic and structural characteristics of ferrites. RE nanoparticles (NPs) such as Yb3+, Gd3+ and Sm3+ were doped in NiFe2O4 ferrite structure via sol-gel auto-combustion method and hydrothermal method was utilized to fabricate their graphene-based nanocomposites. The weight loss and decomposition of the nanocomposites were determined using temperature-dependent thermo gravimetric analysis (TGA/DTA). The single-phase structure of the NiFe2O4, NiFe2O4/G, Yb doped NiFe2O4/G, Gd doped NiFe2O4/G, and Sm doped NiFe2O4/G nanocomposites was... 

We introduce highly antifouling Polymer-Nanoparticle-Nanoparticle/Polymer (PNNP) hybrid membranes as multi-functional materials for versatile purification of wastewater. Nitrogen-rich polyethylenimine (PEI)-functionalized halloysite nanotube (HNT-SiO2-PEI) nanoparticles were developed and embedded in polyvinyl chloride (PVC) membranes for protein and dye filtration. Bulk and surface characteristics of the resulting HNT-SiO2-PEI nanocomposites were determined using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Moreover, microstructure and... 

An economical epichlorohydrin cross-linked chitosan @ magnetic Fe3O4/activated carbon nanocomposite, CH-EP@Fe3O4/AC, was successfully synthesized and used as a suitable adsorbent material for removal of a triphenylmethane cationic dye, Malachite green (MG), an anionic dye, Reactive red 120 (RR120), and Mercury ions (Hg2+) from aqueous solution. The prepared adsorbent has been characterized with Fourier transform infrared spectroscopy, X-ray diffraction, Scanning electron microscopy, Thermogravimetric analysis, Brunauer–Emmett–Teller analysis as well as Vibrating sample magnetometer. According to the result of Brunauer–Emmett–Teller isotherm, the prepared adsorbent has a specific surface area... 

A comprehensive study was carried out for the first time on the acidity of eleven different leaves. After functionalization of the leaves with –SO3H groups, the most acidic one was magnetized using nickel ferrite nanoparticles. This novel, inexpensive, green and biodegradable catalyst showed high activity in the synthesis of pyrazoline and 2-amino nicotinonitriles. Some compounds are new and have never been synthesized before and confirmed by FT-IR, 1H NMR and 13C NMR analysis. All of these compounds possess multiple biological activities. The heterogeneous magnetic catalyst (NiFe2O4-Alnus-SO3H) was characterized by various physicochemical techniques such as FT-IR spectroscopy, field... 

Abstract: In the present paper, an efficient Cu-catalyzed regioselective acylation of indoles with phenylglyoxals was developed which is the first example of indolyl diketones synthesis by a heterogeneous catalyst. The magnetic polyacrylonitrile was synthesized through anchoring acrylonitrile monomers on Fe3O4 nanoparticles surface and then modified with 2-aminopyridine. At the final step, copper nanoparticles were immobilized onto the polymeric support containing stable ligands from functionalized nitrile groups of polyacrylonitrile. The different techniques such as Fourier transmission infrared spectroscopy, X-ray diffraction, Field emission scanning electron microscopy, Transmission... 

Iron oxyhydroxide (α-FeOOH, Goethite) is one of the most thermodynamically stable iron oxides and a widespread soil mineral. In this study, a mixture of two phenolic extracts of rosemary and Echinacea was utilized as stabilizing and reducing agents for the synthesis of Goethite (FeOOH) nanoparticles without utilizing harmful toxic solvents. The resulting nanoparticles were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM)-energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), vibrating-sample magnetometer (VSM), thermogravimetry/differential thermal analysis (TG/DTA), and Brunauer–Emmett-Teller (BET). MTT assay was... 

This study investigates the durability of confined geopolymer concrete with fiber-reinforced polymer and compares the results with ordinary Portland cement concrete (OPCC). Two hundred and seventy geopolymer concrete (GPC) specimens with different mix designs (fly ash- and granulated blast furnace slag(GBFS)-based GPC) were prepared and then wrapped with two different fiber-reinforced polymers (carbon and glass FRPs). For 12,960 hrs (eighteen months), the specimens were exposed to four different pHs (2.5, 7 (water), 7.25 (saltwater), 12.5). The reliability analysis was performed after modeling the compressive strength over time. Based on the results, the ductility of all specimens decreased... 

Polyamide 6 (PA6)/carbon nanotube (CNT)/conductive carbon black (CCB) nanocomposites with the incorporation of physical and chemical dispersants were prepared via melt blending method to examine the synergistic enhancement of electrical conductivity. Investigation of modified CNT with octadecyl triphenyl phosphonium chloride (OTPC-CNT) as physical dispersant was performed by Fourier transform infrared, nuclear magnetic resonance, Raman spectroscopy, and thermogravimetric analysis. Morphological, electrical, rheological, and mechanical properties of PA6/CNT/CCB nanocomposites were examined by field emission scanning electron microscopy, transmission electron microscopy, digital insulation... 

Manganese dioxide/reduced graphene oxide (MnO2/RGO) nanocomposite material was synthesized by the in-situ anodic pulse electrodeposition method to fabricate symmetric supercapacitors. The effects of the pH value of the electrodeposition bath were considered on the properties of fabricated electrodes. Three pH values of 4, 7, and 10 were evaluated, and physicochemical properties were studied using field-emission scanning and transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, nitrogen gas sorption isotherm, and thermogravimetric analysis. The electrochemical evaluation was performed by galvanostatic charge/discharge (GCD), cyclic voltammetry (CV),... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

Polyamide 6 (PA6)/carbon nanotube (CNT)/conductive carbon black (CCB) nanocomposites with the incorporation of physical and chemical dispersants were prepared via melt blending method to examine the synergistic enhancement of electrical conductivity. Investigation of modified CNT with octadecyl triphenyl phosphonium chloride (OTPC-CNT) as physical dispersant was performed by Fourier transform infrared, nuclear magnetic resonance, Raman spectroscopy, and thermogravimetric analysis. Morphological, electrical, rheological, and mechanical properties of PA6/CNT/CCB nanocomposites were examined by field emission scanning electron microscopy, transmission electron microscopy, digital insulation... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

In this study, water-soluble terpolymers containing highly hydrophilic monomers of acrylamide and maleic anhydride and highly hydrophobic monomers of styrene were synthesized (ASM) through the one-step inverse emulsion polymerization. Proton nuclear magnetic resonance (1H NMR), fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction pattern (XRD) were performed to investigate the chemical structures and structural transformations of ASM. Thermal stability and thermal decomposition steps of ASM were studied by thermogravimetric analysis (TGA). An Ubbelhode capillary viscometer and a rheological mechanical spectrometer (RMS) were employed to obtain the specific, relative, and... 

In present research six samples of nano X-type hexagonal ferrites with general formula SrBaMg2-xCoxDyyFe28-yO46 (x = 0–1; y = 0–0.1 with step size of 0.2 and 0.02, respectively) were synthesized by sol–gel technique. The temperature required for the phase formation of these materials was estimated using thermogravimetric analysis. X-ray diffraction patterns revealed the pure phase of the prepared materials up to the doping concentration of x = 0.4, y = 0.04 along with the second phase for higher doping concentration. The secondary phase appeared due to the solubility limit of higher ionic radius Dy3+ ions into the hexagonal lattice. The mean crystalline size decreased from 29 to 18 nm while... 

Abstract: In the present paper, an efficient Cu-catalyzed regioselective acylation of indoles with phenylglyoxals was developed which is the first example of indolyl diketones synthesis by a heterogeneous catalyst. The magnetic polyacrylonitrile was synthesized through anchoring acrylonitrile monomers on Fe3O4 nanoparticles surface and then modified with 2-aminopyridine. At the final step, copper nanoparticles were immobilized onto the polymeric support containing stable ligands from functionalized nitrile groups of polyacrylonitrile. The different techniques such as Fourier transmission infrared spectroscopy, X-ray diffraction, Field emission scanning electron microscopy, Transmission... 

Gel-fiber structure with the potential of extracellular matrix (ECM) mimics can be introduced as a suitable candidate for bioengineering applications. In this study, piezoelectric gellan gel-fiber was prepared with incorporating poly(vinylidenefluoride) (PVDF)/glass-flake in the gellan matrix. Glass-flake nanoparticles were modified with silane group, PVDF/glass-flake nanofibers were synthesized and short-strand nanofibers were fabricated using the mechanical homogenizer method. Brunauer–Emmett–Teller (BET), Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) analyses were used for surface modification study, and scanning electron microscopy (SEM),... 

Novel self-supported Mgy(CuxNi0.6-xMn0.4)1-yFe2O4 with (y = 0, 0.05, 0.1, 0.15, and x = 0, 0.15, 0.3, 0.45, 0.6) oxygen carriers (OCs) are synthesized through the co-precipitation method. The synthesized OCs’ properties are characterized by X-ray powder diffraction (XRD), Raman spectra, transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and Thermogravimetric Analysis (TGA). The synthesized OCs are assessed in Chemical Looping Steam Methane Reforming (CL-SMR) process subject to different mesh sizes, reaction temperatures, Steam/Carbon...