Sharif Digital Repository

We present a new approach for analytical modeling and calculating the response of high-Tc superconductive transition edge sensors in a wide range of modulation frequencies for different configurations of the film patterns. The method used here is based on solving the heat transfer differential equation for two different time varying heat sources, which are related to the absorbed radiated power. The used method employs two-dimensional boundary conditions for describing meander-line patterned devices. The results from the applied method are in better agreement with those obtained from the frequency response measurements of the characterized samples, than the previously developed models. In... 

In this paper we have studied both DC size effect and anomalous skin effect caused by surface and grain boundary scattering on the resistivity of Cu thin films by a Monte Carlo method. Contribution of each scattering mechanism and the interaction between them are analyzed separately. A simple and fast numerical recursive method is also introduced to guess the structure of electric field and distribution of current inside the thin film to evaluate the surface resistance instead of complicated analytical formulas  

Gold and copper thin films are widely used in microelectromechanical system (MEMS) and nanoelectromechanical system (NEMS) devices. Nanoindentation has been developed in mechanical characterization of thin films in recent years. Several researchers have examined the effect of surface roughness on nanoindentation results. It is proved that the surface roughness has great importance in nanoindentation of thin films. In this paper, the surface topography of thin films is simulated using the extracted data from the atomic force microscopy (AFM) images. Nanoindentation on a rough surface is simulated using a three-dimensional finite-element model. The results are compared with the results of... 

Two kinds of carbon coated and uncoated 316L stainless steel are studied to use as bipolar plates in fuel cells. The results show that the conductive amorphous carbon film has a low corrosion rate in simulated PEMFC environment. Rather long term potentiostatic tests and SEM investigations indicate that carbon thin films can be a good candidate to use as bipolar plate  

Nanostructured materials have attracted much attention in recent decades. Nowadays, there are numerous nanomaterials with several applications. The ultrasonic spray pyrolysis method is a cost-effective and adaptable technique based on an aerosol process for synthesizing nanoparticles and depositing thin films. The technique is capable of synthesizing metal, oxide, and composite nanomaterials with precisely controllable morphologies and chemical compositions using metal salts in aqueous solvents. More importantly, it is popular, as evident from the growing number of studies being conducted on the technique. Here, we review studies conducted on basic principles and applications of the... 

In this study, a dislocation-based model is presented for investigating the evolution of micro structure and mechanical properties of thin films during a wide range of straining. The model is applied to the High Pressure Torsion (HPT) process of thin nickel disks that provides valuable information on the evolution of material parameters during deformation. The model considers a free surface theory for thin films and can explain the size effect phenomenon in agreement with previous reported trends in literature  

Nanostructured CoTiO3 thin films and powders were prepared by a straightforward aqueous particulate sol–gel route. Titanium(IV) isopropoxide and cobalt chloride were used as titanium and cobalt precursors, respectively. Also, hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. The effect of Co:Ti molar ratio and annealing temperature were studied on the crystallization behavior and chemical properties of the products. X-ray diffraction and Fourier transform infrared spectroscopy revealed that the powders crystallized at the low annealing temperature of 300 °C for 1 h, containing anatase-TiO2,... 

Stochastic parameters of self-agglomerated metallic nanoparticles on a dielectric film surface were studied using atomic force microscopy (AFM) analysis. In this regard, the rough surfaces including the nanoparticles were analyzed and characterized using structure function, roughness exponent and power spectrum density of the AFM profiles and their gradients, for different metal concentrations and heat treatment temperatures. The diffusion parameters, such as activation energy, of the nanoparticles initially accumulated on the surface into a porous and aqueous silica thin film were obtained using the AFM spectral analysis of the profiles and their gradients. It was found that the tip... 

The electrodeposition of nickel was studied using electrochemical techniques in different electrolytes and various agents. The voltammetry analysis clearly showed that the electrodeposition of nickel was a diffusion-controlled process associated with a typical nucleation process. The current transients represented instantaneous nucleation with a typical three-dimensional (3D) growth mechanism. Scharifker's equations were derived for instantaneous and progressive nucleation of the 3D growth of the spherical centers under diffusion-controlled condition. The number of nucleation sites increased with the increment in overpotential and Ni 2+ concentration. Atomic force microscopy was used to... 

It is well known that electro-hydrodynamical effects in freely suspended liquid films can force liquids to flow. Here, we report a purely electrically driven rotation in water and some other liquid suspended films with full control on the velocity and the chirality of the rotating vortices. The device, which is called "film motor", consists of a quasi two-dimensional electrolysis cell in an external in-plane electric field, crossing the mean electrolysis current density. If either the external field or the electrolysis voltage exceeds some threshold (while the other does not vanish), the liquid film begins to rotate. The device works perfectly with both DC and AC fields. © Springer-Verlag... 

We report on the results of a YBa2Cu3O7−x (YBCO) superconductive transition edge bolometer (TEB) fabricated on a Ce0.9La0.1O2−7 (CLO) buffered single crystalline yttria-stabilized zirconia (YSZ) substrate. Metal organic deposition was used for the fabrication of both the YBCO thin film as well as CLO buffer layer, while standard photolithography was applied for TEB preparation. YBCO thin film properties were analysed using scanning electron microscopy (SEM), X-ray diffraction (XRD), AC susceptibility and resistance versus temperature measurements. Optical response of the TEB in terms of voltage amplitude and phase was analysed and measured through four-probe technique in a liquid nitrogen... 

We report on the results of a YBa2Cu3O7−x (YBCO) superconductive transition edge bolometer (TEB) fabricated on a Ce0.9La0.1O2−7 (CLO) buffered single crystalline yttria-stabilized zirconia (YSZ) substrate. Metal organic deposition was used for the fabrication of both the YBCO thin film as well as CLO buffer layer, while standard photolithography was applied for TEB preparation. YBCO thin film properties were analysed using scanning electron microscopy (SEM), X-ray diffraction (XRD), AC susceptibility and resistance versus temperature measurements. Optical response of the TEB in terms of voltage amplitude and phase was analysed and measured through four-probe technique in a liquid nitrogen... 

Nickel nanostructure thin films were electrodeposited on copper plates to investigate the fractal study. Scharifker's equations were derived for instantaneous and progressive nucleation and 3D growth of hemispherical centres under diffusion-controlled condition to calculate in situ change of fractal dimension of surface. It was assumed that the layer could be formed completely when fractal dimension of surface inclined to 2. Moreover, the fractal analysis of atomic force microscopy (AFM) images has confirmed the presumed model. Also, the power values of power spectral density (PSD) of the AFM images were determined using fast Fourier transform (FFT) algorithms. The PSD plots are approximated... 

In this research, the effect of Fe2O3 content on the electrochromic properties of WO3 in thermally evaporated (WO3)1-x-(Fe2O3)x thin films (0 ≤ x ≤ 0.4) has been studied. The atomic composition of the deposited metal oxides was determined by X-ray photoelectron spectroscopy analysis. The surface morphology of the thin films has been examined by atomic force microscopy. The surface roughness of all the films was measured about 1.3 nm with an average lateral grain size of 30 nm showing a smooth and nanostructured surface. The electrochromic properties of (WO3)1-x-(Fe2O3)x thin films deposited on ITO/glass substrate were studied in a LiClO4 + PC electrolyte by using ultraviolet-visible... 

Hierarchical TiO2 nanoleafed nanorod thin film was successfully synthesized on the fluorine doped tin oxide glass substrate. For this purpose, the nanorods were coated on the TiO2 seeded substrate via the hydrothermal method. Then, nanoleafs were grown on the nanorods by aqueous chemistry. Field emission scanning electron microscopy, energy dispersive spectroscopy, and Raman spectroscopy were utilized for thin film characterization. The results clarified that anatase-phase nanoleafs were uniformly grown on the rutile-phase nanorods in the TiO2 coating. The photocatalytic performance of the thin film was determined by photodegradation of anionic and cationic organic pollutants, and the... 

In terms of manufacturability, there is a high tendency to deposit light-absorbing CuInS2 films by solution processing methods like ink-based depositions. In particular, for nanoparticle inks, the synthesis of highly dispersed and stable inks, with uniformity in the deposition process, is a serious challenge. Here, we demonstrate a novel two-step low-temperature CuInS2 film deposition method in which the In2S3 is deposited first. It then partially is converted into CuInS2 through the infiltration of Cu+ ions in the In2S3 layer in a dip-coating process. The resulting films are highly uniform, with diffraction peaks indicating the formation of pure CuInS2 phase. The proper stoichiometry of... 

Anti-reflection and self-cleaning coatings on the glass substrate are used to improve the performance of solar systems. TiO2 are one of the most used semiconductors for this application. In this research meso-porous TiO2 coatings (that synthesized by the sol-gel process) with the various extent of porosity (using different concentrations of Pluronic F127, as pore-forming agent) have been investigated. The coating's thickness and porosity and anti-reflective properties were studied by FE-SEM and UV/VIS spectrometer (transmission spectra test), respectively. It was found that the use of F127 leads to the formation of pores smaller than 30 nm and increases the surface roughness from 1.5 (for... 

A new dimensionless parameter, Sh-factor, is introduced by using dimensional analysis and extending the quantum yield definition to show power-law relations among light intensity, light wavelength, distance from light source, concentrations of dye/pollutant and photocatalyst, time, and degradation percent. The Sh-factor has the same equation form for photoactivated remediation systems with particulate and thin-film photocatalysts, and it provides mathematical tools to predict degradation performance of a photocatalytic system. These power-law equations separate simply the operational parameters related to the lamp from semiconductor photocatalyst characteristics. The light scattering and... 

Present research represents the application of artificial neural networks to predict the chemical composition of electrodeposited Ni-Mo thin films. Artificial neural networks commonly are utilized as a prediction tools so that these networks could approximately find kind of logic relationships between inputs and target; they fitted appropriate coefficient and weighting factors to the inputs which are proportional to their importance. In order to evaluate the model developed, experimental results were compared with the predicted ones. However, more data are required to train more reliable prediction models, presents study revealed an acceptable error less than 1% between predicted values and... 

As a selective estrogen receptor modulator, raloxifene (RXF) prevent of osteoporosis in postmenopausal women by estrogenic actions on bone and decreases the risk of invasive breast cancer by anti-estrogenic actions on the breast and uterus tissue. However, RXF may increase the risk of blood clots, including deep vein thrombosis and pulmonary embolism. For the first time glassy carbon electrode modified with a thin film of melamine/carbon nanoparticles (CNPs/Mela) was constructed and used for the sensitive voltammetric determination of RXF. In comparison with unmodified electrode, the presence of the CNPs/Mela film resulted in a remarkable increase in the peak currents and sharpness of the...