Sharif Digital Repository

Titanium dioxide (TiO2) is important because of wide applications such as self cleaning surfaces and using in photoelectrochemical cells .Recent researches have shown that addition of silicon dioxide into TiO2 increases hydrophilicity of SiO2-TiO2 and improves surface properties. Until now a little research has been done on the double layer TiO2/SiO2 system; therefore, this system is suitable for studying. In general this thesis consists of theoretical and experimental parts .In the experimental part, multilayer systems of SiO2/TiO2/Glass have been selected (thickness of SiO2 is 20 nm) and surface morphology and hydrophilicity have been investigated by Atomic Force Microscopy (AFM) and... 

Nanosized CdS coupled TiO2 nanocrystals were prepared by a microemulsion-mediated Hydrothermal method at relatively low temperatures. Modification of this nanocomposite with Tyrosine,Phenylalanine,Glysine and Glutamate ,especially Tyrosine resulted in enhanced photocatalytic degradation rate of Nitrobenzene( NB ) compared to using CdS-TiO2 under visible light irradiation. The prepared samples were characterized by BET,SEM, XRD, UV–Vis spectroscopy ,FTIR .It was found which have high surface area about 470 m2 g−1 and mesoporous character with the average pore diameter of 2.8 nm.The results showed this nanocomposite consisted of uniform anatase TiO2 with highly dispersed cubic phase CdS... 

TiO2, Ag/TiO2 and AgBr/TiO2 synthesized by sol – gel method. Synthesized samples were characterized by X- Ray diffraction (XRD) , Fourier transformed infrared ( FT – IR) , Scanning electron microscopy ( SEM) techniques. The results of XRD showed that the particle size is in the nanorange and anatase form of titania is present in all of the photocatalysts. Kinetics of photocatalytic degradation of an azo dye (Acid Orange 7) on photocatalysts was studied. The effect of various parameters such as dye concentration, amount of photocatalyst( AgBr/TiO2) and pH of solution on the rate and efficiency of degradation of Acid Orange 7 was studied. The optimized conditions ( [AgBr/TiO2]= 100 ppm,... 

The present work is based on the, synthesis and investigation of photocatalytic activity of TiO2, TiO2/MWCNT, ZnO and ZnO/MWCNT nanostructures. The nanostructures were prepared using multi-walled carbonnanotubes (MWCNT) as templates.The SEM images of TiO2 and ZnO nanoparticles and TiO2/MWCNT andZnO/MWCNT showed that nanosize TiO2 and ZnO particles homogeneously and densely supported on the surfaces of multiwall carbon nanotubes the photocatalytic activity of the TiO2, TiO2 /MWCNT, ZnO and ZnO/MWCNT was examined by the degradation of Basic Blue 41(BB41) under UV and Vis lights. The optimum conditions for degradation of BB41 on TiO2 where found to be: calcination temperature (450 °C), dye... 

In the present work, one dimensional ZnO nanostructures were grown by seed-assisted hydrothermal method. Hydrothermal processing parameters were controlled to obtain ZnO nanorods with diameter lower than 120 nm. The products were characterized by FE-SEM, EDAX, XRD, PL, and ATR-FTIR analyses. ZnO nanoparticles were also synthesized via a simple solvothermal method and their photo peropeties were compared with onedimensional nanostructures. Thereafter dye-sensitized solar cells based on TiO2-ZnO double layer nanostructured film were fabricated. It was observed that DSSC efficiency increased with decreasing the thickness of the film. The highest efficiency of 2.41% was obtained  

Photodynamic therapy that has developed over last century, now has become more widely used medical tool for the treatment of various diseases such as cancer. This technique involves delivery of photosensitizing drugs, irradiation of light and motivation of drugs. The limitation of light penetration in body tissue, may resolve by application of upconversion nanoparticles. Upconverting nanoparticles could help treatment of cancer tumors in deep or critical points of body by converting high penetrating Near-Infrared emissions to higher energy visible emissions.In this research Er3+-Yb3+ Co-doped titanium dioxide upconversion nanoparticles prepared by Sol-gel method. The phase structure and... 

Samples of the V2O5 catalysts supported on nanostructures of TiO2 and γ-Al2O3 were synthesized via hydrothermal method for the oxidative dehydrogenation of propane (ODHP) to propylene. The TiO2 support was utilized in both commercial microstructures and prepared nanostructures from their corresponding salts. Furthermore,the γ-Al2O3 was also prepared from two novel methods. Moreover, the vanadium catalysts supported on hybrid TiO2 and γ-Al2O3 were prepared. The performances of the prepared catalysts were subsequently examined in a fixed-bed reactor. The main products were propylene, ethylene and COx.The vanadium catalyst over TiO2 and γ-Al2O3 had the best performance under the reactor test... 

Semiconductor-based photo catalysts, titanium dioxide (TiO2) especially, have been extensively studied for the oxidative photo destruction of organic pollutants in wastewaters and hydrogen production as a green energy source. Much effort has been made to remove the restrictions on the use of TiO2 and challenges related to the recovery of powdery photocatalysts. In this study, copper oxide (CuO) and Zirconium oxide (ZrO2) were used to synthesize nanocomposites. Composition of TiO2/CuO and TiO2/ZrO2 with different weight percentages of second dioxide was synthesized by chemical methods and structural properties of samples were studied by X-ray diffraction and scanning electron microscopy.... 

Many efforts have been put into increasing the efficiency of dye-sensitized solar cells that part of it has been devoted to structure and chemical composition of photoanode electrode. In this thesis, the effect of changes in the composition and its influence on light scattering ability in photoanode of dye sensitized solar cells was studied.First, the nanoparticles of titanium dioxide powder through solvothermal method as well as spherical particle and barium titanate powder by sol-gel method were synthesized. XRD and FE-SEM analyses indicated that synthesized powders are in good size and morphology regarding the intended chemical composition. Optical properties of TiO2 particles were... 

The most important raw material for production of titanium dioxide is titanium that used in Aerospace, Plastic, Pigment and Pharmacy industries. Due to the presence of titanium minerals in Iran, reduce imports of titanium dioxide is one of the goals of the Ministry of Industries and Mines to achieve self-sufficiency in the production of TiO2.One of the very rich sources of titanium is alluvial sands in northern of Iran. In this study the TiO2 high grade pigment production from these sources has been investigated. Titanium-bearing sands with 9.5% TiO2 are used to produce high grade TiO2 pigment. After magnetic separation stage and reach a purity of 16.2% TiO2, upgrading slag step is not... 

Nanotechnology as an interdisciplinary science is used in many fields. The use of nanomaterial, make new opportunities in the industry. However, safety issues and environmental risks of the consequences of their use in various applications are the matters of concern. Because of the new emergence of this technology, it is essential that all aspects including possible harmful effects on the environment will also be considered. One way to remove the nanoparticles, is electrocoagulation method, assemble nanoparticles into larger particles with an electric current. In this study, the removal of titanium dioxide nanoparticles, due to its high use in the industry, with electrocoagulation method and... 

Improvement of semiconductors photocatalytic activity by different means has always been one of the challenges for researchers. Semiconductors doping for band-gap engineering and changing morphology to increase specific surface area and photocatalytic reaction sites are amongst these efforts. In this research simultaneous effect of these two parameters for three morphologies containing nanoparticle, nanowire and micro dandelion, simultaneously doped with carbon and nitrogen has been investigated. Final purpose of this thesis is to decrease the band-gap energy close to soft UV photon energies to make surface photodynamic therapy possible. Nanoparticle morphology with size distribution between... 

The Dye-sensitizers loading on TiO2 is decreasing the electron excitation energy and therefore improving the photocatalytic performance from the increasing the sensitivity under visible light irradiation.in this project CoPCTS , Mordant dye and N3(Ruthenium 535) used as dye-sensitizers. Also The addition of VIII group metals on TiO2 is improving the photocatalytic activity that increasing the photocatalytic reaction rate because of the intermediation role of them for moving the conduction band electrons to electron acceptors and increasing the pair electron-holes long-life that in this case Pt loading used as a VIII group metal. In this project Titanium Isopropoxide as a precursore and... 

Recently, The interest of using the coherent and incoherent photons in chemical synthesis have been raised considerably. In this project, theoretical calculations due to investigation of irradiation’s effects on Fischer- Tropsch synthesis have done. Fischer – Tropsch synthesis is the process that converts synthesis gas, i.e. a mixture of carbon monoxide and hydrogen, in to a wide range of long chain hydrocarbons and oxygenates. We invest the first chapter of this project to introduce of Fischer- Tropsch synthesis and its importance. Following in the next chapter we have analyzed the photocatalyst in microscopic scale. In third chapter, we have claimed the necessary theories which are useful... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

TiO2 has been considered the most promising photocatalyst for the degradation of pollutants in air or water; however, it shows poor absorption of visible light and requires ultraviolet (UV) light for activation. We have successfully synthesized a visible-light-active carbon and nitrogen and yttrium tridoped TiO2 catalyst. In this study, Nanocrystalline photocatalysts of TiO2 doped with yttrium, codoped with carbon and nitrogen and tridoped with carbon and nitrogen and yttrium were prepared by the sol–gel method and investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy ( DRS), Scanning electron microscopy (SEM/EDS) and... 

By consideration of increasing demands to use implants and efforts to get technical knowledge and localization of this implants, considerable research in this field is needed. Therefore, presentation of a coating which is able to provide parameters needed for an acceptable implant is the aim of this study. In this direction, modification of surface of metallic implants in order to achieve nanotubes of titanium oxide, with the purpose of providing biocompatibility was done. On the other hand, because chronic infection of the implant’s surrounding is one of the main important reasons in rejection of implants, 〖TiO〗_2 nanotubes as a drug carrier were used in order to solve this problem. So,... 

Photodynamic therapy that has been developed over last century, now has become more widely used medical tool for the treatment of various diseases such as cancer. This technique involves delivery of photosensitizing drugs, irradiation of light and motivation of drugs. The limitation of light penetration in body tissue, may resolve by application of upconversion nanoparticles. Upconverting nanoparticles could help treatment of cancer tumors in deep or critical points of body by converting high penetrating Near-Infrared emissions to higher energy visible emissions. In the present work, rare earth elements doped TiO2 nanoparticles are synthesized. The photodynamic properties of rare earth... 

Dye-sensitized solar cell (DSSCS) is the third-generation of solar cells based on semiconductors formed between a photo sensitized anode and counter cathode which make a photo electrochemical system. They haven’t been commercially marketed due to their lower efficiency than the previous generations. In order to achieve the higher efficiency, the electron injection and light absorption must be increased. One way to increase electron injection is doping the semiconductor with an external ion to reduce lattice band gap. In this work, we made powder and Nano-structured film of titanium dioxide doped with various molar ratios of Mg by the sol-gel process. The effect of Mg:Ti molar ratio on... 

Structure and morphology of titanium dioxide have an excessive effect on the photovoltaic properties of dye-sensitized solar cells (DSCs). Different approaches have been used to improve the efficiency of these cells. One is using a scattering layer. Studies have been shown that properties of scattering layer such as composition and morphology have great effect on photovoltaic properties of solar cell. In this project, the effect of cubic morphology of TiO2 as a scattering agent in photoanode of DSCs is studied. Titanium dioxide with various morphologies including nanoparticles, solid and hollow cubic structures have been synthesized by solvothermal and hydrothermal methods, respectively. The...