Sharif Digital Repository

In this work, we present a study on the existence of Dirac type dispersion in the simplest of periodic metallic waveguide structures. It is shown that periodic repetitions of two dissimilar waveguides (WGs) can be properly designed to lead to a Dirac type dispersion. A simple theory using circuit modeling is presented to find the condition for Dirac point operation. In addition, mode-matching followed by full-wave simulations validate that the band structure matches that of the theory and shows that a Dirac dispersion can be realized. A Dirac Leaky-Wave Antenna (DLWA) is then implemented using this simple arrangement in substrate-integrated-waveguide (SIW) technology. This DLWA has the... 

This study aims to investigate the nonlinear dynamic characteristics of annular cylinders coupled with a fluid medium to identify the effective parameters on stability margins at different rotation speeds. To achieve this, stability and nonlinear vibrations of rotating cylindrical shells containing incompressible annular fluid are considered. The fluid medium is bounded by a rigid external cylinder. Sanders–Koiter kinematic assumptions are utilized to determine the geometrically nonlinear structural equations of motion. These equations are then used to investigate finite amplitude vibrations of various fluid-loaded shells at different states. A penalty approach is introduced by using... 

In this work, the authors experimentally show Dirac Leaky Wave Antennas (DLWAs) at upper microwave frequencies. For the first time, DLWAs are implemented using simple Parallel plate waveguide (PPW) technology, while yielding desirable radiation features and continuous beam scanning through broadside, as well as extremely low profile, with significant ease of fabrication, making them well suited for Ku band applications such as satellite communication, radar and emerging fifth-generation (5G). A planar Dirac photonic crystal in PPW is shown with a closed bandgap and linear dispersion around broadside. In this work, 1D and 2D PPDLWAs are designed that provide scannable fan and pencil beams,... 

In this paper, the hybrid Delay-And-Sum (DAS) with Sparse Reconstruction (SR) method was further developed for damage location in composite plates. In composite materials, anisotropy leads to some challenges in using conventional damage location methods, which are developed for isotropic materials. In the hybrid DAS-SR method, the DAS and SR methods were combined as a complement of each other. To investigate the DAS-SR method for composite structures, the group velocity of the travelling wave for different directions was first measured experimentally via PZTs. The DAS and SR formulations were then modified to be compatible with the direction-dependent group velocities. The results show that... 

Dirac dispersion cones enable remarkable wave phenomena in electronics as well as electromagnetic systems. In this work, the authors experimentally demonstrate for the first time the Dirac leaky wave antennas (DLWAs) at millimetre-wave (mm-wave) frequencies. The demonstrated DLWAs are implemented in the substrate integrated waveguide technology, delivering unprecedented features at high frequencies such as radiation at, and continuous beam scanning through broadside, with ease of fabrication, making these designs well suited for mm-wave applications such as emerging fifth generation and Internet of Things, radar and imaging. It is shown that a planar Dirac photonic crystal can be realised... 

In the majority of leaky-wave antennas (LWAs), the lack of broadside radiation is due to the existence of an open-stopband (OSB) at broadside. In this letter, we present a study on the OSB suppression in LWAs. In particular, we start from a simple unit cell comprising a planar waveguide having alternating open and short sidewalls. The analytical and simulated band structures testify consistently that OSB suppression can indeed be realized by proper design, analytically studied using mode-matching, and further supported by full-wave simulations. An LWA is then implemented using the substrate integrated waveguide (SIW) technology, which provides interesting features such as a high directive... 

Dirac leaky-wave antennas (DLWAs) are derived from photonic crystals exhibiting Dirac cone dispersion around their Γ-point. DLWAs provide high directive beams and continuous frequency beam scanning, non-fluctuating leakage constant and real non-zero Bloch impedance at and around broadside, due to the closed and linear Dirac dispersion relation around broadside. These features, along with their inherent compatibility for higher frequency designs (larger unit cells compared to metamaterials), make DLWAs an ideal candidate for the upper microwave, mm-wave and terahertz frequencies, and for applications such as radar, 5G, spectroscopy, etc. In this review, we cover the recent developments on... 

Temporal coupled mode theory (CMT) has so far been applied phenomenologically in the analysis of optical cavity-waveguide structures, and relies on a priori knowledge of the to-be-excited resonator mode. Thus a rigorous derivation from Maxwell's equations, and without any prior knowledge of the resonator type is needed. In this paper we derive temporal CMT of optical cavities coupled to waveguides. Starting from Maxwell's equations and considering a proper expansion of the modes of the waveguide and resonator, and using mode orthogonality, the temporal CMT for this structure is obtained. We show that this formulation is general and can be applied to both traveling wave and standing wave type... 

Temporal coupled mode theory (CMT) has so far been applied phenomenologically in the analysis of optical cavity-waveguide structures, and relies on a priori knowledge of the to-be-excited resonator mode. Thus a rigorous derivation from Maxwell's equations, and without any prior knowledge of the resonator type is needed. In this paper we derive temporal CMT of optical cavities coupled to waveguides. Starting from Maxwell's equations and considering a proper expansion of the modes of the waveguide and resonator, and using mode orthogonality, the temporal CMT for this structure is obtained. We show that this formulation is general and can be applied to both traveling wave and standing wave type... 

In this paper, the in-plane free vibration analysis of the functionally graded rotating disks with variable thickness is presented utilizing DQM. It is assumed that the rotational velocity of the disk is constant and the thickness and material properties including modulus of elasticity and density vary along the radial coordinate. The distribution of the forward and backward traveling waves versus the angular velocity is demonstrated for several modal circles and nodal diameters with respect to the fixed and rotating coordinate systems. After presenting the accuracy and convergence of the numerical method, the derived formulation and the solution method are validated by comparing the results... 

we propose a graphene-covered subwavelength metallic grating where the Fermi level of graphene is sinusoidally modulated as a leaky-wave antenna at terahertz frequencies. This structure can convert spoof surface plasmon guided waves to free-space radiation due to the tunability of graphene. Analysis and design of the proposed leaky-wave antenna are discussed based on sinusoidally modulated surface impedance. The surface impedance is obtained by an analytical circuit model. The sinusoidal surface impedance is realized using modulation of the conductivity of graphene by applying a bias voltage. The proposed leaky-wave antenna is capable of electronic beam scanning with an almost constant gain... 

In this paper, a novel travelling-wave printed Frequency Scanning Antenna (FSA), which can be used for imaging purposes, is proposed. All sample designs scan the space symmetrically about the broadside direction. For different scanning ranges, two low profile antennas are designed on a 6.6 mils thick Rogers 4350 board substrate layer. Impedance bandwidth of the first one covers 6.5GHz, from 29.5GHz to 36GHz, and this antenna scans 56° in angular space. The second antenna has 5.6GHz bandwidth from 30.6GHz to 36.2GHz, and scans 98° in angular space by means of switching the input port. The average gain and the Side-lobe level (SLL) of the first and the second antennas are 11.46dBi, 12.8dB, and... 

Recently, the mechanisms of natural undulatory locomotion of aquatic animal swimming have become one of the most significant issues for the researchers, swimmers and engineers. This study aims to elucidate and compare the propulsive vortical signature and performance of backward (negative undulation) and forward (positive undulation) travelling waves through a typical fishlike propulsor by a systematic numerical study. The numerical approach uses a pressure-based finite volume method solver to solve Navier–Stokes equations in an arbitrary Lagrangian–Eulerian framework domain containing a two-dimensional NACA 0012 foil moving with prescribed kinematics. Some of the important findings are: (1)... 

Recently, the mechanisms of natural undulatory locomotion of aquatic animal swimming have become one of the most significant issues for the researchers, swimmers and engineers. This study aims to elucidate and compare the propulsive vortical signature and performance of backward (negative undulation) and forward (positive undulation) travelling waves through a typical fishlike propulsor by a systematic numerical study. The numerical approach uses a pressure-based finite volume method solver to solve Navier–Stokes equations in an arbitrary Lagrangian–Eulerian framework domain containing a two-dimensional NACA 0012 foil moving with prescribed kinematics. Some of the important findings are: (1)... 

Array scanning method (ASM) is employed to study the input impedance and radiation pattern of a two-dimensional periodic leaky-wave antenna (LWA). The antenna consists of a narrow horizontal strip dipole of arbitrary length underneath a two-dimensional (2D) periodic screen of metallic patches, which acts as a partially reflective surface (PRS), and backed by a ground plane. First, the Green's function in the presence of the 2D array of metallic patches is calculated by means of the ASM and then the current distribution and input impedance of the source dipole are calculated through the electric field integral equation and method of moments. The far-field pattern is computed using the... 

The present paper deals with the design and optimization of a heat driven thermoacoustic refrigerator. A simplified model is developed which enables to pinpoint and examine the most important physical characteristics of a compact traveling wave thermoacoustic refrigerator driven by a traveling wave thermoacoustic engine. The model can explain the so-called traveling standing wave effect in thermoacoustics very well. The position, length and hydraulic radius of the refrigerator are optimized for the maximum total COP. The prime mover efficiency, refrigerator COP and dimensionless dissipation and their impacts on total COP are investigated and discussed. The results indicate that a COP of... 

A new design for a valveless micropumping device has been proposed that integrates two existing pumping technologies, namely, the wall induced traveling wave and the obstacle-type valveless micropump. The liquid in the microchannel is transported by generating a traveling wave on the channel, while the placing of two asymmetric trapezoid obstacles, along the centerline of the channel inlet and outlet, leads to a significant (up to seven times) increase of the net flow rate of the device. The effectiveness of this innovative design has been proved through a verified three-dimensional finite element model. FluidStructure Interaction (FSI) analysis is performed in the framework of an Arbitrary... 

In the present paper, effects of non-uniform excitation due to spatially variation of seismic waves under the reservoir bottom on linear and nonlinear responses of arch dams are studied. Foundation is assumed to be massed and infinite elements are utilized to model semi-infinite medium via the far-end boundary of the foundation FE model. A continuum crack propagation model based on the smeared crack approach in 3D space is introduced. Reservoir's water is assumed compressible and the coupled system is solved using the staggered method. As a case study, Amir-Kabir double curvature arch dam in Iran is selected to investigate seismic behavior of the system. Two cases are analyzed in which wave... 

The existence of travelling wave solution to equations of a viscous heat conducting combustible fluid is proved. The reactions are assumed to be one step exothermic reactions with a natural discontinuous reaction rate function. The problem is studied for a general gas. Instead of assuming the ideal gas conditions we consider a general thermodynamics which is described by a fairly mild set of hypotheses. Travelling waves for detonations reduce to specific heteroclinic orbits of a discontinuous system of ODE's. The existence proof for heteroclinic orbits corresponding to weak and strong detonation waves is carried out by some general topological arguments in ODE. The uniqueness and... 

The influence of the loading of the FET electrodes, on signal and noise performances of the device in mixer application is studied. It is shown that exciting the input signal from one end of the gate and extracting the output signal from the opposite ends of the gate can improve the device characteristics, provided that the two remaining ends of the gate and the drain are properly loaded. This structure makes the lines (i.e. the gate and the drain electrodes) to be matched with the loads. Therefore it leads to a travelling wave FET mixer, which is a good candidate for high power mm-wave application. © 2000 IEEE