Sharif Digital Repository

Magnetic nanoparticles of CuFe2O4 were applied as catalyst system for one-pot thiophosphate synthesis via the reaction of aryl sulfonyl chlorides with H-phosphonates under conventional heating conditions. This is an extremely efficient and green method for thiophosphate synthesis under base- and solvent-free conditions. Various thiophosphates were obtained in good to excellent yields under the optimized reaction conditions in a short time. The catalyst can be easily recycled from the reaction by an external magnetic field and reused for the next run. In this study, TD-DFT B3LYP/6-31 + G(d) calculations are in good accord with the experimental results. A comparison between experimental and... 

This study describes the synthesis of TiO2/WO3 composite systems with a varying concentration of WO3 by a glucose-template assisted method and demonstrates their round-the-clock photoactivity performance towards the degradation of methanol (MeOH) under illumination and dark conditions. XRD results indicated a biphasic anatase-rutile nature of TiO2, with tunable concentrations with respect to the WO3 loading. WO3 incorporation extended the light absorption of the system towards visible light, increasing the observed photoactivity. The obtained results were further validated using photo-electrochemical investigations such as photocurrent measurements and the impedance response of the systems.... 

A soft template route is reported for the fabrication of polyaniline nanospheres via the oxidative polymerization of aniline in the presence of β-naphthalenesulfonic acid (β-NSA) as both surfactqant and dopant, and ammonium persulfate as oxidant at 2-5°C. Control over the morphology and size of the nanoparticles was achieved by changing the reaction medium via addition of an organic cosolvent (i.e. ethanol or ethylene glycol) and by controlling the concentrations of aniline and β-NSA and the molar ratio of β-NSA to aniline. By this means the size of the β-NSA-aniline micelles and the way that aniline monomer interacts with the micelles were controlled. In fact the lower dielectric constant... 

To overcome the drawback of poor solar light utilization brought about by the narrow photoresponse range of TiO2, a silver and sulfur co-doped TiO2 was synthesized. Using the prepared catalyst, solar photocatalytic degradation of 2-nitrophenol (2-NP) by a TiO2-based catalyst was studied for the first time. Effects of the co-doping on the structural, optical and morphological properties of the synthesized nanoparticles were investigated by different characterization methods: X-ray diffraction, N2 adsorption-desorption measurements, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, UV-visible diffuse reflectance spectroscopy and Fourier... 

A readout box prototype for the CMS Hadron Forward calorimeter upgrade was built and tested in the CERN H2 beamline. The prototype was designed to enable simultaneous tests of different readout options for the four anode upgrade PMTs, new front-end electronics design and new cabling. The response of the PMTs with different readout options was uniform and the background response was minimal. Multi-channel readout options further enhanced the background elimination. Passing all the electronic, mechanical and physics tests, the readout box proved to be capable of providing the forward hadron calorimeter operational requirements in the upgrade era  

In this study, organic contaminant degradation was intensified by increasing the oxidative capacity of the reaction system through simultaneous photocatalysis and heterogeneous persulfate activation. Fe nanoparticles were served as a multifunctional modifier to enhance the photoactivity of graphitic carbon nitride (CN), by tuning optical properties as well as persulfate (PS) activation rate, by introducing a new activation pathway. The synthesized photocatalysts were characterized by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), UV-visible... 

In the present paper, the light output distribution due to poly-energetic neutron/gamma (neutron or gamma) source was calculated using the developed MCNPX-ESUT-PE (MCNPX-Energy engineering of Sharif University of Technology-Poly Energetic version) computational code. The simulation of light output distribution includes the modeling of the particle transport, the calculation of scintillation photons induced by charged particles, simulation of the scintillation photon transport and considering the light resolution obtained from the experiment. The developed computational code is able to simulate the light output distribution due to any neutron/gamma source. In the experimental step of the... 

The light scattering, harvesting and adsorption effects in dye-sensitized solar cells (DSSCs) are studied by preparation of coated carbon nanotubes (CNTs) with TiO2 and Zr-doped TiO2 nanoparticles in the forms of mono- and double-layer cells. X-ray diffraction (XRD) analysis reveals that the phase composition of Zr-doped TiO2 electrode is a mixture of anatase and rutile phases with major rutile content, whereas it is the same mixture with major anatase content for coated CNTs with TiO2. Furthermore, the average crystallite size of Zr-doped TiO2 electrode is slightly decreased with Zr introduction. Field emission scanning electron... 

BiVO4/Graphene/TiO2 as a novel nanocomposite photoanode was designed, synthesized and characterized for photoelectrochemical application. BiVO4/Graphene nanocomposite was initially synthesized by photocatalytic process and then, BiVO4/Graphene/TiO2 nanocomposite thin film was prepared by deposition of the BiVO4/Graphene solution onto the surface of sol-gel derived TiO2 thin film. Morphology, crystal structure, surface chemical composition and optical properties of the synthesized BiVO4/Graphene/TiO2 nanocomposite thin film were characterized and compared with the BiVO4/Graphene and pure TiO2 samples. Observations of scanning electron microscopy (SEM) images revealed that the surface of the... 

Branched hierarchical zinc oxide nanowires (BH-ZnO NWs) were fabricated successfully by a facile and rapid synthesis using two-step growth process. Initially, ZnO NWs have been prepared by anodizing zinc foil at room temperature and followed by annealing treatment. Then, the BH- ZnO NWs were grown on the ZnO NWs by a solution based method at very low temperature (31 oC). The BH- ZnO NWs with different aspect ratio were obtained by varying reaction time (0.5, 2, 5, 10 h). Photocatalytic activity of the samples was studied under both UV and visible light. The results indicated that the optimized BH-ZnO NWs (5 h) as a photocatalyst exhibited the highest photoactivity with about 3 times higher... 

Typical copper ferrite nanoparticles (CuFe2O4) were used as a catalyst for one-pot synthesis of β-ketophosphonates via the reaction of alkenes with H-phosphonates under conventional heating conditions. The catalyst was prepared by using the coprecipitation method and was analyzed by physiochemical techniques. By using this catalyst system, several types of useful and new β-ketophosphonate products were obtained in very good to excellent yields under optimized reaction conditions in a novel way. Furthermore, the catalyst is recyclable and reusable from the reaction. © 2020 Elsevier B.V  

The electronic conductor-insulator transition in Ca-doped BiFeO 3 films grown by pulsed-laser deposition technique has been investigated. Nature of the transition is resolved to be Mott type through the control of band-filling. Calcium resolved to have colossal effect on enhancing the electrical conductivity of BiFeO 3, but it did not affect band gap of the mother phase perceptibly. UV-visible study yielded band gap of 2.72-2.81 eV (at 300 K) for different concentrations of calcium. Both UV-visible and photoluminescence spectra revealed sub-band gap transitions at 2.17 and 2.38 eV, of which the latter might be ascribed to the oxygen vacancies  

In this study, titanium dioxide (TiO2) nanotube array (TNA) films are fabricated via anodization of titanium (Ti) sheet. After annealing, the films consisted of well ordered, vertically oriented TNAs of 125±6nm diameter, 38±3nm wall thickness, and 2.9±0.3μm in length. Cadmium sulfide (CdS) nanoparticles are deposited on the synthesized TNAs by sequential-chemical bath deposition (S-CBD) method with different immersion cycle (n) to produce heterogeneous TNA/CdS-n (n=10, 20 and 30) nanostructures. UV-visible absorption spectra of the samples revealed that the absorption edge of CdS modified TNAs was shifted to a higher wavelength with respect to the pure TNAs indicating band gap reduction of... 

In this research, we have focused on the formation of Ag nanoparticles dispersed in SiO2 matrix using sol-gel method. The influences of the metal concentration on the size variation of Ag nanoparticles and the size effect on the surface plasmon absorption have been studied. Sol-gel silica thin films containing Ag particles were synthesized by dip-coating on soda-lime glasses. The molar ratio of Ag / Si was chosen from 0.2% to 8%. All films were dried in air at 100 °C for 1 h. Using X-ray photoelectron spectroscopy, the Ag / Si ratios in the prepared films have been measured. In addition, it was shown that the prepared matrix was a stoichiometric composition as SiO2, and the synthesized... 

Superparamagnetic iron oxide nanoparticles (SPION) with narrow size distribution and stabilized by polyvinyl alcohol (PVA) were synthesized. The particles were prepared by a coprecipitation technique using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Using a design of experiments (DOE) approach, the effect of different synthesis parameters (stirring rate and base molarity) on the structure, morphology, saturation magnetization, purity, size, and size distribution of the synthesized magnetite nanoparticles was studied by various analysis techniques including X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC)... 

A new photocatalyst (Ag-S/PEG/TiO2) was synthesized by adding polyethylene glycol (PEG) to an efficient Ag-S/TiO2 photocatalyst, to obtain a photocatalyst that is highly active under visible light. In addition to Ag-S/PEG/TiO2, Ag-S/TiO2 and pure TiO2 were prepared to compare their properties and activities. Specifically, the morphologies and microstructures of the nanophotocatalysts were characterized by means of powder X-ray diffraction (XRD), N2 adsorption-desorption measurements, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy,... 

The interaction of [60]fullerene with a newly synthesized series of 17-to 21-membered macrocyclic ligands containing an O2N3-donor set has been investigated. The formation constants (K) arising from their complexation with [60]fullerene macrocycles, having various ring size, were measured in CHCl3 media by UV-visible spectroscopy applying Benesi-Hildebrand (BH) equation and their stoichiometries were also determined by the Job method. The best K value was measured for 20-membered ring macrocycle in which a 1:1 complexation stoichiometry with [60]fullerene was dominant. Furthermore, 1H NMR spectroscopy data reveled that the macrocylic ligand coordinates [60]fullerene via the nitrogen-donor... 

CdS/TiO2/graphene (CTG) nanocomposite thin films were synthesized by a facile production route. The TiO2/graphene (TG) nanocomposite was initially fabricated by sol-gel method in such a way that TiO2 nanoparticles loaded on graphene oxide (GO) sheet via photocatalytic process. Then, CdS nanoparticles were deposited on the TG thin film by successive ion layer adsorption and reaction process (SILAR) approach. Based on atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the TG thin film possessed a larger surface area as compared with the pure TiO2 thin film due to presence of graphene sheet. UV/visible spectroscopy exhibited... 

Electrical properties and electronic structure of Bi1-xCa xFe1-yMnyO3-δ grown by pulsed-laser deposition on BaTiO3/SiO2/Si substrate were investigated. Results showed that Ca has drastic effect on symmetry of crystal and electrical poperties of BiFeO3. On the other hand, Mn revealed to have more radical effect on optical properties and energy gap of the compound. XPS results represented that although Ca tend to decrease Fe valence state, Mn tends to stabilize it at 3+ (at least in this concentrations). UV-visible study yielded bandgap of 2.51-2.81 eV (at 300 K) for different concentrations of Ca and Mn. UV-visible spectra also revealed sub-bandgap defect transitions at 2.2 and 2.4 eV.... 

In the present work a central composite design based on response surface methodology (RSM) is employed for fine tuning of the aspect ratios of seed-mediated synthesized gold nanorods (GNRs). The relations between the affecting parameters, including ratio of l-ascorbic acid to Au3+ ions, concentrations of silver nitrate, CTAB, and CTAB-capped gold seeds, were explored using a RSM model. It is observed that the effect of each parameter on the aspect ratio of developing nanorods highly depends on the value of the other parameters. The concentrations of silver ions, ascorbic acid and seeds are found to have a high contribution in controlling the aspect ratios of NRs. The optimized parameters led...