Sharif Digital Repository

Surface modified magnetic nanoparticles (M-NPs) were synthetized and stabilized in poly (vinylalcohol) solution. The solutions with various magnetic nanoparticles contents were gammairradiated and magnetic poly (vinyl-alcohol) (M-PVA) hydrogels were synthesized. The magnetic hydrogels and also the un-irradiated magnetic poly (vinyl alcohol) nanocomposite films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FTIR) and mechanical measurement. The M-NPs were uniformly dispersed in the polymer matrix due to a strong interaction between the surface-modified M-NPs and polymer matrix.... 

SrFe12-xTix/2Zn x/2O19 (x = 0-2.5) powders were synthesized by use of chlorides through co-precipitation method. The obtained powders were then milled by high energy ball mill to crash hard agglomerates and achieve nanoparticles. In order to evaluate microwave absorption versus frequency, composites including ferrite, as a filler, and matrix of polyvinylchloride (PVC) with weight ratio of 70% ferrite were prepared. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA) were employed to study the structural, magnetic and microwave absorption properties... 

This work describes the preparation of magnetic and pH-sensitive beads based on κ-carrageenan and sodium alginate for use as drug-targeting carriers. Physical cross-linking using K+/Ca2+ ions was applied to obtain ionic cross-linked magnetic hydrogel beads. The produced magnetite beads were thoroughly characterized by TEM, SEM/EDS, XRD, FTIR, and VSM techniques. While the water absorbency (WA) of magnetic beads was enhanced by increasing the weight ratio of κ-carrageenan, introducing magnetic nanoparticles caused a decrease in WA capacity from 15.4 to 6.3 g/g. Investigation on the swelling of the hydrogel beads in NaCl, KCl, and CaCl2 solutions revealed the disintegration of beads depending... 

Due to the strong magnetic anisotropy energy, the L10 FePt nanocrystals are considered as one of promising candidates for magnetic recording media with ultrahigh densities. The surfaces of Si and SiO2 wafers have been covered by FePt nanoparticles (NPs) and heated at 600 °C for 1 h to form the L10 phase. Bonding of NPs with the SiO2 surface in the presence of magnetic field during annealing process controls the L10 FePt NPs size and their uniform surface distribution. In the presence of perpendicular magnetic field to the surface, the size of NPs obtains up to 30 nm with coercivity of 5.8 kOe and in parallel magnetic field, the NPs size reaches to 45 nm with coercivity of 2.9 kOe. These... 

Magnetic Fe3O4@SiO2 starch-graft-poly(acrylic acid) (SPAA) nanocomposite hydrogels were prepared and used as absorbents for removal of crystal violet from aqueous solutions. Dynamic swelling, effect of contact time, absorption kinetics and nanocomposite hydrogel mass for removal of crystal violet dyes from aqueous solutions were studied. Fourier transform infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometer measurements were used for the characterization of the nanocomposite hydrogels. The nanocomposite hydrogels had high magnetic sensitivity under an external magnetic field, which allowed their magnetic separation from water, thus avoiding secondary... 

Polyvinylidene fluoride magnetic nanocomposite films were prepared by solution casting using two types of magnetic nanoparticles: (a) magnetic nanoparticles synthesized by co-precipitation method using oleic acid as a coating agent and (b) Fe3O4 nanoparticles prepared by hydrolysis method without using a coating agent. Dynamic light scattering measurements showed mean diameters of 135 and 46 nm in co-precipitation and hydrolysis methods, respectively. Scanning electron microscopy showed that the magnetic nanoparticles were uniformly dispersed inside the polymer matrix. X-ray diffraction confirmed that Fe3O4 nanoparticles induced nucleation of β- crystalline phase in the matrix polymer. The... 

We developed a modified straightforward method for the fabrication of uniformly sized silica-coated magnetite clusters core/shell type nanocomposite particles. Proposed simple one-step processing method permits quick production of materials in high yield. The structural, surface, and magnetic characteristics of the nanocomposite particles were investigated by transmission electron microscopy (TEM), scanning electron microscope (SEM), powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier-transform infrared (FTIR). The sphere-shaped particles almost have the average diameter of 120 nm, with a magnetic cluster core of 80 ± 15 nm, and a silica shell of 25 ± 10 nm... 

We prepared three ferrite nanocatalysts: (i) copper ferrite (CuFe 2O4) (ii) ferrite where cobalt was substituted by nickel (Nix Co1-x Fe2O4, with x=0, 0.2, 0.4, 0.6), and (iii) ferrite where nickel was substituted by zinc (Zn y Ni1-y Fe2O4 with y=1, 0.7, 0.5, 0.3), by the sol-gel method. The X-ray diffraction patterns show that the ferrite samples have been crystallized in the cubic spinel structural phase. We obtained the size of grains by field emission scanning electron microscopy images and their magnetic properties by vibrating sample magnetometer. Next, carbon nanotubes were grown on these nanocatalysts by the catalytic chemical vapor deposition method. We show that the catalytic... 

ZnFe2O4 nanoparticles have been successfully prepared through a controlled microwave-assisted co-precipitation. X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM) were used for the structural, morphological and magnetic investigation of the product. SEM micrographs of ZnFe2O4 nanopowder also reveal that nanoparticles have spherical shape. Average particle size was obtained as 12 nm from XRD. Catalytic activity of ZnFe2O4 nanopowder for O-acylation of alcohol and phenol has been investigated. A trace amount of ZnFe2O4 has been effectively used as a nanocatalyst for the acylation of alcohol and... 

Geometry of different electromagnetic parts of Vibrating Sample Magnetometer (VSM) is a major factor of VSM output voltage. In this paper design, geometry optimization and implementation of a sensitive, versatile and relatively inexpensive VSM system has been described. Considering all effective geometrical parameters in the system output voltage, the induced voltage in the pick-up coils has been obtained analytically and the geometry of the pick-up coils has been optimized for maximum output induced voltage. Two opposite series of pick-up coils, piezoelectric based vibration system and required electronic circuits have been designed and the VSM system has been implemented. The implemented... 

Superparamagnetic iron oxide nanoparticles were synthesized by coprecipitation of iron chloride salts at various pH values (9, 10, 11 and12) that were adjusted using an ammonia solution. Increasing the pH from 9 to 12 led to decreases in the size of iron oxide nanoparticles from 7.9±1.4 to 5±0.6 nm and the saturation magnetization (M s) from 82.73 to 67.14 emu/g, respectively, when analyzed with transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). X-ray diffraction patterns as well as M s values showed that magnetite is the dominantly synthesized phase in the examined pH values. Unmodified iron oxide nanoparticles were coated with silica via the hydrolysis and... 

Experimental investigations are performed in order to determine the thermal conductivity of NiFe2O4 nanoparticles dispersed in deionized water. The magnetic nanoparticles are synthesized using a microemulsion method. The X-ray diffraction (XRD), transmission electronic microscopy (TEM), and vibration sample magnetometer (VSM) are used to characterize the structure, the size and the magnetic properties of the nanoparticles. The VSM results disclose that the NiFe2O4 nanoparticles are ferromagnetic at room temperature. Experimental measurements on thermal conductivity of the prepared nanofluids are conducted at different volume concentrations between 0% and 2% and in the temperature range of... 

The influence of annealing treatment on macro- and micro-texture of cold-rolled FeCo-7.15V ferro-magnetic ultra-thin foils were studied. The microstructural studies performed by field emission scanning electron microscope (FE-SEM) showed the formation of paramagnetic precipitations ((Fe, Co)3V) during annealing. During cold rolling of the FeCo-7.15V magnet, the texture components of type (113)[110], (001)[110], (111)[110], and (111)[121], all related to α and γ-fibers were formed. X-ray diffraction (XRD) and local texture measurements performed by electron backscatter diffraction (EBSD) were made on the annealed samples. Both methods revealed that the recrystallized samples have texture... 

M-type Ce–Co substituted barium hexaferrite nanoparticles were synthesized by sol–gel auto-combustion route. The general formula of ferrites was Ba1−xCexFe12−xCoxO19 in which the x was considered to be: x = 0, 0.1, 0.2, and 0.3. The formed phases in the samples were characterized by using X-ray diffraction, Fourier transform infrared spectroscopy, Mössbauer spectroscopy and vibrating sample magnetometer. The results indicated that an increase in substitutional ion amount caused to decrease vibration frequencies of Fe–O band in the tetrahedral site due to the substitution of heavier Co2+ ion for Fe3+ ion in the tetrahedral site. Moreover, some of Ce3+ ions was transformed to Ce4+ and... 

The nanocrystallization process of amorphous Fe73.5Si13.5B9Nb3Cu 1 was investigated by active screen plasma nitriding (ASPN) treatment at temperatures ranging from 410 °C to 560 °C for 3 h in two gas mixtures of 75% N2-25% H2 and 25% N2-75% H2 at 5 mbar atmosphere. The amorphous ribbons were then annealed under vacuum at the same time and temperatures mentioned above. The structure of the samples was analyzed using various techniques such as X-ray diffraction (XRD), atomic force microscopy (AFM) and differential scanning calorimetry (DSC). Microhardness measurements, electrical resistivity and Vibrating Sample Magnetometer (VSM) were used to study mechanical, electrical and magnetic... 

The effects of milling time and annealing temperature on phase formation, microstructure and magnetic properties of nickel-cobalt ferrite synthesized from oxide precursors by mechanical alloying were studied. The study of milling time effects on phase formation of milled materials showed that if milling continues up to 55 h, single phase nano-sized nickel-cobalt ferrite is obtained. Also, magnetic properties of powders versus milling time and annealing at different temperatures extensively changed, so that annealing at 1200 °C increased the magnetization saturation of the as-milled powder from 15.1 to 53.6 emu/g. X-ray powder diffraction technique (XRD) with Cu-Ka radiation was employed for... 

The comparative study of Active Screen Plasma Nitriding (ASPN) treatment of two Finemet-type alloys with the compositions of Fe73.5Si 13.5B9Nb3Cu1 and Fe 77Si11B9Nb2.4Cu0.6 was investigated in different temperatures ranging from 410°C to 56°C. Differential Scanning Calorimetry (DSC), X-Ray Diffractometery (XRD), Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), electrical resistivity, microhardness measurements and magnetic characterization by a Vibrating Sample Magnetometer (VSM) were utilized to characterize the treated samples. The comparison of the DSC data for the alloys suggested that the smaller amount of Nb as a growth inhibitor shifted the crystallization... 

A facile approach for the preparation of core-shell structured poly(acrylic acid) (PAA)-coated Fe3O4 cluster@SiO2 nanocomposite particles as the support materials for the lipase immobilization is reported. Low- or high-molecular-weight (1800 and 100 000, respectively) PAA molecules were covalently attached onto the surface of amine-functionalized magnetic silica nanoacomposite particles. The successful preparation of particles were verified by scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), thermogravimetric analysis (TGA), zeta potential measurement, and Fourier-transform infrared (FTIR) techniques. Once lipase is covalently... 

This work presents solid-state thermal decomposition synthesis of transition metal ferrites (MFe2O4, M = Zn, Ni, Cd). In this method, binary complexes of [Zn(en)3]3[Fe(ox)3]2, [Cd(en)3]3[Fe(ox)3]2 and [Ni(en)3]3[Fe(ox)3]2 (where en = ethylenediamine and ox = oxalate) are introduced as new single-source precursors to fabricate ZnFe2O4, CdFe2O4 and NiFe2O4 micro/nanostructures, respectively. X-ray powder diffraction (XRD) patterns show that pure CdFe2O4 and NiFe2O4 are formed by thermal decomposition of the single-source precursors at 800°C. When thermal decomposition of [Zn(en)3]3[Fe(ox)3]2 complex is carried out at 700 and 800°C, the final products are composed of ZnFe2O4 and metal oxides.... 

Ternary mesoporous nanocomposites of RGO/Fe3O4-ZnO were prepared successfully via hydrothermal technique. Fe3O4-ZnO core/shell nanoparticles were decorated on the surface of reduced graphene oxide platelet to improve charge separation efficiency and magnetic properties. The phase, microstructure and specific surface area of the prepared samples were determined via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy/selected area electron diffraction (TEM/SAED) and Brunauer–Emmett–Teller (BET) techniques. A vibrating sample magnetometer (VSM) was used for recording the magnetization hysteresis curves. The methylene blue (MB)...