Sharif Digital Repository

In drilling industry, energy consumption counts from 20 to 40 percent of total costs. Enhanced water-based mud (WBM) drilling fluids with nanoparticles can save energy in drilling processes. An in-house Taylor-Couette flow system (TCS) was developed at Australian University (AU) to study WBM enhanced by Al2O3, SiO2, and TiO2 nanoparticles. The TCS is really a practical tool to help well drillers with a rough idea of viscosity when nanoparticles are added. The TCS for sure cannot substitute advanced rheometry. The goal of the present experiment is to produce a rough estimate in field operation. Experimental results were examined with several rheology models in our previous publications. In... 

Supersonic turbulent high-pressure jet flows, which are discharging in low-pressure quiescent ambient, are recognized as imperfectly expanded turbulent jet. Steady-state imperfectly expanded jet flow has been already studied analytically; however, the transient flow has not been thoroughly studied. In the present study, the transient imperfectly expanded jet flow with focus on fuel spray in combustion is investigated analytically employing two-step separation of variables method and Fourier-Bessel expansion. The results are validated using available experimental data. The effects of different parameters such as eddy viscosity and pressure ratio on the behavior of the jet are studied. Results... 

In recent years, the importance of capturing CO2 has increased due to the necessity of minimizing climate change and the detrimental effects of CO2 emissions from industrial processes. CO2 absorption, as one of the most mature carbon capture technologies, has been improved by introducing nanosized particles into liquid absorbents. Nanofluids have been the subject of interest in many studies recently due to their tremendous impact on absorption. This review comprehensively examines the CO2 absorption behavior for nanofluids through the investigation of different absorption systems. Potential mechanisms for improving the absorption/regeneration performance of nanoabsorbents as well as the... 

In this study, the nodal discontinuous Galerkin method is formulated in three-dimensions and applied to simulate three-dimensional non-cavitating/cavitating flows. For this aim, the three-dimensional preconditioned Navier-Stokes equations based on the artificial compressibility approach considering appropriate source terms to model cavitating phenomena are used. The spatial derivative terms in the resulting equations are discretized by utilizing the nodal discontinuous Galerkin method on tetrahedral elements and the derivative of the solution vector with respect to the artificial time is discretized by applying an explicit time integration method. An artificial viscosity method is formulated... 

Simvastatin, a well-known antihyperlipidemic drug, has antibacterial activity against a broad range of bacteria, especially Staphylococcus aureus. In present study, a nanoemulsion gel-based formulation containing Simvastatin was developed for infected wound therapy. Therefore, different formulations of Simvastatin nanoemulsion were prepared. Based on droplet size, polydispersity index and zeta potential, the best nanoemulsion formulation containing Simvastatin was selected for development of nanoemulsion gel formulation of drug using carbomer 934 as gelling agent. Thermodynamic stability of Simvastatin nanoemulsion was assessed at different conditions. The in vitro antibacterial activity... 

The aim of this paper is to design and numerically simulate the mass-transfer compartment and piezoelectric micropump of an implantable integrated microfluidic device for regular microdialysis-based nonenzymatic measurement of glucose level in diabetic patients. The device function is based on the process that the piezoelectric micropump pumps the dialysis fluid into the mass-transfer compartment microchannels, where the interstitial fluid (ISF) glucose diffusion into this dialysis fluid gives it a glucose content, then detected and measured in the sensor section. This diffusion takes place through the semipermeable membranes located in the microchannels at the base of the hollow... 

Droplet-based microfluidics is an attractive approach for producing microgels due to its high potential to control the size and shape of the particles and precisely entrap the substances within the hydrogel matrix. However, the microfluidic generation of monodisperse microgels with desired structures is still challenging. Indeed, the rheological and interfacial properties of the immiscible fluids, as well as the adopted gelling strategy, play important roles in microfluidic methods. Herein, sodium alginate droplets with different concentrations are generated via a microfluidic device with a flow-focusing unit. Besides, a combined in situ and ex situ strategy is optimized to crosslink sodium... 

This paper focuses on developing a new method that represents user-accessible correlation for the estimation of water-based nanofluids viscosity. For this, an evolutionary algorithm, namely Gene Expression Programming (GEP), was adapted based on a wide selection of literature published databanks including 819 water-based nanofluids viscosity points. The developed model utilized the base fluid viscosity as well as volume fraction and size of the nanoparticles as the inputs of the model. Several statistical parameters integrated with graphical plots were employed in order to assess the accuracy of the proposed GEP-based model. Results of the evaluation demonstrate fairly enough accuracy of the... 

Ionic liquids are a significant type of organic salts with attractive and superior physicochemical features for employing in a number of chemical processes. Ionic liquids include one large and asymmetric cationic or anionic functional group. The properties of cationic functional group are almost similar and it is main motivation of this study. In the present investigation, we extended various semi-empirical correlations to predict some temperature-based properties of ionic liquids mixture (IL-mixture). These properties are density, viscosity, surface tension and bubble point pressure. In the case of IL-mixture density, modified Rackett equation and Taylor equation with three scenarios,... 

Onsite partial upgrading is a promising strategy for facilitating pipeline transportation of bitumen without the use of diluent. In the present work, a one-step treatment using an autoclave is optimized toward upgrading Alberta bitumen of 9.6 API gravity and 925,000 cP viscosity. The thermal cracking process was kept simple in order to maintain an economic and environmental advantage. Optimum conditions entailed 75 min of reaction time at 420 °C, without quenching the reactor. These conditions corresponded to highest centrifuged oil product yield of 73.3 ± 1.1 wt%, viscosity of 34 ± 2 cP and API gravity of 18.9 ± 0.5. H-NMR, CHNS and FTIR measurements revealed thermally cracked asphaltenes... 

The rapid and effective separation of high-viscosity heavy crude oil from seawater is a worldwide challenge. Herein, an ultralow density, photothermal, superhydrophobic, and thermally conductive polyurethane/polyaniline/hexagonal boron nitride@Fe3O4/polyacrylic-oleic acid resin sponge (PU/PANI/h-BN@Fe3O4/AR) was fabricated with a water contact angle (WCA) of 158°, thermal conductivity of 0.76 W m-1 K-1, density of 0.038 g cm-3, limited oxygen index (LOI) of 28.82%, and porosity of 97.97% and used for solar-assisted separation of high-viscosity crude oil from water. Photothermal components were composed of PANI and Fe3O4, while h-BN particles were used as thermally conductive and flame... 

In this study, water-soluble terpolymers containing highly hydrophilic monomers of acrylamide and maleic anhydride and highly hydrophobic monomers of styrene were synthesized (ASM) through the one-step inverse emulsion polymerization. Proton nuclear magnetic resonance (1H NMR), fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction pattern (XRD) were performed to investigate the chemical structures and structural transformations of ASM. Thermal stability and thermal decomposition steps of ASM were studied by thermogravimetric analysis (TGA). An Ubbelhode capillary viscometer and a rheological mechanical spectrometer (RMS) were employed to obtain the specific, relative, and... 

The present study employs Discrete Element Method (DEM) to establish a rheological model that relates the apparent viscosity of a granular material to shear rate, normal stress, and water saturation. In addition, a theoretical model was developed to determine water distribution and water-induced forces between particles for different saturations. The resulting forces were embedded in a 3D shear cell as a numerical rheometer, and a wet specimen was sheared between two walls. A power law rheological model was then obtained as a function of inertia number and saturation. It was found that up to a critical saturation, the apparent viscosity increased with saturation that was higher than that of... 

Utilizing 3D and 2D porous materials modified by a superhydrophobic/philic coating for quick removal of oil from water and a continuous process of oil/water separation, respectively, has attracted a lot of attention recently. Here we report the separation capacities of one commercial and three home-made sponges, sprayed by a superhydrophobic coating, for a broad range of oils and solvents. The contact angle of water on the coated sponges is 162.5˚, whereas the pristine sponge shows a contact angle of 91.8˚ (these values are for sponge D which had the highest absorption capacity). We investigate the effects of the density of sponges and the dynamic viscosity of oils and solvents on the... 

Viscosity of mixed oil is an important parameter which is required in transportation and production processes of mixed crude oils. There is no universal and general model for prediction of viscosity of mixed oils at different conditions. Hence, developing simple, accurate and general models for prediction of mixed oil viscosity is of great importance. In this work three computer based models named MLP-NN, PSO-RBF and Hybrid-ANFIS were developed for prediction of viscosity of mixed oils. A number of 513 experimental data covering wide ranges of influencing parameters were utilized to develop the models. The accuracy of predictions of the developed models was examined by using different... 

Undoubtedly, microfluidics has been a focal point of interdisciplinary science during the last two decades, resulting in many developments in this area. Centrifugal microfluidic platforms have good potential for use in point-of-care devices because they take advantage of some intrinsic forces, most notably centrifugal force, which obviates the need to any external driving forces. Herein, we introduce a newly designed detection chamber for use on microfluidic discs that can be employed as an absorbance readout step in cases where the final solution has a very low viscosity and surface tension. In such situations, our chamber easily eliminates the air bubbles from the final solution without... 

The electrohydrodynamic (EHD) 3D printing technology is an Additive Manufacturing (AM) method that can be used in the manufacture of submicron-size structures. In this process, which is based on the formation of Taylor jet from a metallic ink, the investigation of particles reaction and aggregate formation in ink during printing is of great importance. In this paper, a new Finite Element model based on particle tracing in fluids is presented that couples the different physics that govern an EHD phenomenon. Vortex flow caused by boundary shear stress was observed in the ink jet; which was more like the Marangoni phenomenon in a stationary drop. By experimentally validating the presented model... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

In the present research, NiO–SDC (Samarium doped Ceria) nanopowder was synthesized through sol–gel combustion method using citric acid as a reducing agent (fuel) and metal nitrates as an oxidant. The characteristics of the synthesized powder were thoroughly analyzed by DTA/TG, XRD, BET and FESEM/EDX. Tubular gel-casted porous specimens of NiO–SDC (50:50 wt%) composite materials were produced after stabilizing suspensions of composite powder in an aqueous environment by addition of 3 wt% dispersant and 2.5 wt% agar as the gel builder. The effect of Dolapix CE64 as a dispersant, agar as a gel-builder and the amount of solid loadings on the processing and properties of porous ceramics was... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed...