Sharif Digital Repository

Due to the decrease in oil reserves in the world, increasing population and the growing demands for oil consumption in the world, increasing the oil recovery from oil reservoirs has become more important. Increasing the amount of oil production efficiency by using low salinity water/modified salinity water has been highly appreciated during the last two decades. Low-salt water is a new method, due to its advantages such as low cost, simplicity of operation and low environmental hazards. It is believed that low salinity water can alter the rock wettability from a more oil-wetting state to a more water-wetting state. In order to be able to predict the performance of low salinity water... 

Determining the time of breakthrough of injected water is important when assessing waterflood in an oil reservoir. Breakthrough time distribution for a passive tracer (for example water) in percolation porous media (near the percolation threshold) gives insights into the dynamic behavior of flow in geometrically complex systems. However, the application of such distribution to realistic two-phase displacements can be done based on scaling of all parameters. Here, we propose two new approaches for scaling of breakthrough time (characteristic times) in two-dimensional flow through percolation porous media. The first is based on the flow geometry, and the second uses the flow parameters of a... 

The development of an oil field plays an important role in the optimum production. In the past, several wells have been used in a multi layer reservoir to produce oil from each layer. It costs oil industry billions of dollars and the problem would be more severe in the offshore. Nowadays, one well can produce oil from different pay zones in a reservoir. In this type of well called smart or intelligent well, production tubing is in common between pay zones and some chokes are installed on the tubing to produce oil from different layers. The size of choke usually varies and can be controlled by an electrical system installed in the well. As each pay interval has different capacity in terms of... 

From previous years, water injection was considered as one of the most common methods for enhanced oil recovery. But recently much attention has been paid on the use of low salinity water (LSW) as an enhanced oil recovery fluid. The main mechanism that causes improve oil recovery is wettability alteration to a more water wet state. The change observed in recovery factor during LSW flooding induced from changes in relative permeability and capillary pressure when different levels of salinity are used. However, a few researchers tried to evaluate how macroscopic flow functions depend on the salinity of injected water. To this end, a series oil displacements by water performed on sandstone rock... 

Enhancing oil production from fractured reservoirs is challenging. The flow characteristics observed in naturally fractured reservoirs are complicated due to interaction between the two different flow domains: fracture and matrix. Spontaneous imbibition is one of the most important recovery processes in water-wet fractured reservoirs. Oil cannot be spontaneously produced from oil-wet rocks, unless the capillary pressure barrier between fracture conduits and matrix is overcome. The flow characteristics in fractured systems thus relate to the wettability of the rocks. Low salinity water injection has been widely studied as a method of enhancing oil recovery in recent years. However, its impact... 

Management decisions, enhanced oil recovery, and reservoir development plans in petroleum industries are based on predictions by reservoir simulation. Due to uncertainties in model parameters or engineering assumptions, the simulation results are not accurate, while they are correct. For more accurate estimation of unknown production quantities, it is required to characterize the unknown parameters and its uncertainty. By using static data alone the result of characterization is unreliable and unsure, therefore dynamic data use practically. In reservoir engineering literature, this is called “History Matching”.The ensemble Kalman filter is an optimal recursive data processing algorithm based... 

High efficiency and low-emission fuel cells have the capacity to replace fossil fuels for energy supply concerns. Solid oxide fuel cells operate in relatively high temperature and have power plant applications. Hence, they are acquainted to be coupled with cycle gas turbine to reduce the cost and increase the overall system efficiency. The control of these hybrid systems is so important. Due to the system nonlinearity and having more than one controlled variable, its control with classic methods would be difficult. The model based predictive control is used as an alternative to mitigate these difficulties. In addition to their high performance, their extension to the multivariate case would... 

The Low salinity water flooding is one of the important methods of secondary and tertiary oil production in which many expert petroleum-production engineering working on it in recent two decades. There are some basis mechanisms for low salinity method presented in the literatures including fine migrations, alkaline flooding, multicomponent ionic exchange, electrical double-layer expansion and pH-driven wettability alteration. The main approach is generating low salinity mechanism especially wettability alteration in OpenPNM framework. OpenPNM is a python base framework developed by Jeff Gostick for porous media modeling. OpenPNM has paved the way for extracting pore network models (PNM) from... 

Gravity Drainage and Capillary Imbibition are among the most important mechanisms in oil production from carbonate fractured reservoirs. In order to investigate the feasibility and effects of these mechanisms in oil recovery from carbonate cores, some different experiments were carried out at Sharif University Laboratories. Carbonate cores were taken away from the well-known Asmari outcrop, Asmari Mountain in south east of M.I.S. city and used in these experiments. Oil and gas samples were collected from field separators and recombined to reservoir composition. The Gas-Oil ratio was adjusted to obtain the reservoir fluid properties. A core flooding apparatus with various capabilities was... 

Considering the world's diminishing oil reserves, as well as the growing demand for oil and energy consumption, Enhanced Oil Recovery (EOR) techniques are becoming increasingly important in the attempt to improve oil production. Engineering salinity waterflooding has gained widespread attention and popularity in the last two decades due to its environmental friendliness, lack of expensive additives, low operating costs, and ease of use as an oil extraction process. The goal of this study is to use an innovative method to develop a mechanistic approach model that simulates and forecasts the mechanism and performance of the engineered water flooding process. Wettability alteration, the most... 

So far, many studies have been carried out on the core-scale regarding the effects of hysteresis on the macro-scale properties of systems including fluids and porous rock, however, many issues related to the physics of the problem (especially regarding the way fluids are distributed and the trapping of the non-wetting phase) at the pore-scale need further investigation. In the process of multiphase fluid flow in porous media, hysteresis refers to the dependence of the results of the fluids’ displacements on the history of fluid saturation and the direction of saturation changes (increasing or decreasing). The first step to investigate the hysteresis effect is to determine the amount of fluid... 

Recent experimental studies have demonstrated that the lowering of brine could alter the wettability of the oil-brine-rock systems from an oil-wetting state toward a more water-wetting state. This so-called “Low-salinity effect” (LSE) is one of the main effects of the enhanced oil recovery technology based on low-salinity waterflooding. “Double layer expansion” (DLE) in the thin brine film is proposed as the principal mechanism of this phenomenon. Nonetheless, the role of the electrical behavior of the oil/brine and rock/brine interfaces on the kinetics and dynamics of this process is not well understood. Moreover, since most of the previous works have either dealt with a thin film at... 

Low salinity water injection is one of the new and important methods of enhancing oil recovery. Experimental studies show the fact that the change in water salinity affects the interfacial properties of water-oil (Fluid-fluid interactions) And the change in wettability that represents the porous media (Rock-fluid interactions) is effective for Oil-recovery. Recently, progress have been made in simulating the process of injecting low-salinity water into the field or core dimensions. However, the simulation of the low salinity water injection process has been much less studied considering the fluid / fluid and fluid / rock interactions at the pore scale. The purpose of this study is to... 

Enhanced Oil Recovery (EOR) techniques have become of the main priorities of the oil industry during the high oil price era. It is interesting to note that the common method to increase production from reservoirs is the water injection method, which recovers a very low amount of oil from the oil-wet matrices due to the lack of water imbibition. Previous studies have shown that changing the wettability of rock would critically increase the oil recovery efficiency. This could be achieved by the low-salinity water injection method. In recent years, extensive studies have been conducted on this technique to evaluate its effectiveness for various types of oil reservoirs. Simultaneous injection... 

Reservoir lifetime optimization is an important issue. The policies that are used for maximum production using optimization methods become challenging in the presence of uncertainty. Robust Optimization (RO) method is a technique to deal with uncertainty. Because of insufficient data, uncertainty is an inherent characteristic of reservoir model. This leads to inexact solutions of an optimization problem. Also, design based on uncertainty in economic parameters, especially uncertain oil price is a challenging issue. Taking the uncertainty explicitly is a solution when there is no measurement available. To take into account uncertainty several possible values (realizations) for the uncertainty... 

In recent years, due to the development of smart wells, optimization of waterflooding by injection/production rate control has receivedsome interests. We can postpone breakthrough time and increase the sweep efficiency by using inflow control valves (ICV). Due to complexity of reservoirs, existence of constraints and numerous influencing parameters, we need a robust and suitable optimization approach to overcome such problems. In this thesis, model predictive control (MPC) is chosen to be our optimization approach. MPC is suitable for constrained multi variable functions. Genetic algorithm is was chosenas optimizer. Eclipse reservoir simulator was used for reservoir simulation. Eclipse input... 

Low salinity/smart waterflooding is simple to apply and a promising enhanced oil recovery method in which ion-tuned saltwater is injected into subsurface oil reservoirs. Many aspects of this operation, in particular those pertaining to nano-scale, are not yet fully understood. The present dissertation is an attempt to shed light on the microscopic properties and behavior of rock/brine/oil interfaces throughout low salinity/smart waterflooding. Several simulations were carried out for oil/brine and calcite/brine categories each containing various ions and hydrocarbons compounds. The surface contribution of non-functional oil compounds (aromatics and aliphatics) near brine medium was... 

Water flooding is one of the improved oil recovery methods that has been used for past decades. The water flooding efficiency is calculated in two different scale; macroscopic scale and microscopic scale. The efficiency in macroscopic scale is called volume sweep efficiency (Ev) and in microscopic scale, displacement sweep efficiency (Ed). A special type of hydrocarbon reservoirs are composed of several permeable units in an impermeable shaley background in a way that hydrocarbon can just flow through the permeable units. The predominant feature of such reservoirs is continuity of permeable units that affecting the flow behavior. This simplification enables us to model such reservoirs by... 

Oil composition plays an undeniable role on the low salinity water flooding (LSWF) efficiency. This property directly affects the kinetics of wettability alteration through electrostatic interactions and interfacial tension (IFT). For instance, mixing in stagnant zones through a thin water film is considered as one of the most important diffusion controlled phenomenon which is goverened by Non-Fickian solute transport model. The major two potentials controlling the solute transport in thin film are salinity gradient and electrostatic potentials, which can be affected by oil composition and surface charges. This study aims to investigate the effect of oil composition on low salinity... 

Water injection, as one of the conventional methods to increase the oil recovery factor has always been at the center of research works for Enhanced Oil Recovery (EOR). The conducted studies show that by controlling the amount and type of ions in the injected water, the recovery efficiency can be improved. In the meantime, most of the investigations are focused on the interaction between water/rock/oil to trace the wettability alteration. However, these interactions especially between the injected water and the oil phase, would lead to change of surface charge distribution of the reservoir rock. Besides, this effect can change some of the characteristics of the fluid phases, especially in...