Sharif Digital Repository

Thermal expansion and hot deformation are two phenomena causing dimensional errors in investment casting. This error occurs in dimensions between the die and wax pattern. Therefore, the wax's thermo-physical and thermo-mechanical properties, the metal die features, and the process parameters affect the dimensions of the wax pattern. Some important effective process parameters are the injection temperature, die temperature, and holding time. In this paper, the effect of injection parameters on the dimensional accuracy of the wax model created by a metallic die is studied. The Taguchi formulation based on the design of experiments is applied to obtain the optimum condition in achieving the... 

Since their introduction, paper-based microfluidic analytical devices (μPADs) have been ubiquitously utilized for different applications. The spontaneous imbibition of liquids in the paper-based devices that eliminates the requirement of an external pumping system has played a primary role in making paper an appropriate alternative for many other materials in the fabrication of microfluidic devices. Wax patterning is one of the most common methods to fabricate μPADs. Dynamics of the flow in channels with wax boundaries deviate from Washburn's law. Despite some research performed to model the effects of wax boundaries, some gaps remain in the presented models. A more general model is needed... 

Diurnal volume changes is one of the main factors influencing socket fit in trans-tibial prosthesis and causing pressure problem issues. Embedded bladder liners have been recently a potential approach to deal with this problem. The aim of this technical note was to introduce a new transtibial silicone liner designed based on hybrid socket theory. To make expandability in the liner, an integrated wax structure was constructed over the selected areas of the positive model and then removed after lamination process. In addition, a mechanical system with manual control was designed to fit the liner with the residual limb volume by pumping the water in or out of the liner through connec-tive... 

Nowadays, one of the biggest concerns in the world is increasing the CO2 emissions and global warming due to the over-consumption of fossil fuels. In addition, under the intense market competition, the demand for more efficient systems with higher performance and lower energy consumption has escalated. Since the drag force contributes to a considerable percentage of the energy loss and reducing the performance, a large number of studies have been conducted to improve the surface characteristics and, subsequently, declining the drag force. Making the surface superhydrophobic is one of the most effective ways for this purpose. In this work, two different superhydrophobic surfaces using SiO2... 

Temperature dependency of infrared band intensity for methylene rocking vibration could be used as indication for creation of solid crystals while decreasing temperature. In this work, different experiments were conducted to measure wax appearance temperature, WAT, such as cross polarized microscopy, rheometry and FTIR spectroscopy. Three Iranian crude oils were characterized based on the SARA test and PC-SAFT model was developed to predict WAT. The obtained results by FTIR spectroscopy and PC-SAFT model were in quite agreement. FTIR spectroscopy determined higher WAT values which may be due to its higher sensitivity to smaller wax crystals. Also, the effect of a polymeric crystal modifier... 

Wax precipitation may occur in production or transportation of crude oil form field which is a serious problem in petroleum industry. Flow assurance issues concerning wax precipitation make it necessary to develop a precise thermodynamic model to predict the wax appearance temperature and amount of precipitation at different conditions. In this work a new procedure has been proposed to characterize crude oil based on the SARA test considering the wax and asphaltene as single pseudo components. Two scenarios have been investigated for the survey of the crude oil characterization, with and without asphaltene pseudo component. Also, in this work, the Perturbed Chain form of the Statistical... 

Abstract In this work, two [60] fullerene derivatives were employed as flow improvers for waxy crude oil to reduce problems caused by the crystallization of paraffin during the production and/or transportation of the crude oil. These amine-based derivatives of [60] fullerene have been applied as wax inhibitor for improvement of rheological performance as well as pour point depressant in a waxy crude oil. Moreover, the influence of these [60] fullerene derivatives on the viscosity and pour point was also investigated in an Iranian waxy crude oil sample. The [60] fullerene derivatives were simply prepared by stirring a solution of [60] fullerene and two lipophilic amines. The results similarly... 

In this study, the artificial neural network (ANN) was used for the prediction of WDT. The inputs to network are molar mass and pressure, and the output is WDT at each input. A two-layer network with different hidden neurons and different learning algorithms such as LM, SCG, GDA and BR were examined. The network with 16 hidden neurons and Levenberg-Marquardt (LM) train function showed the best results in comparison with the other networks. Also, the predicted results of this network were compared with the thermodynamic models and better accordance with experimental data for ANN was concluded  

Researchers in Germany and Iran have looked at methods of manufacturing wear parts using nanostructured hardmetal combined with a cheaper stainless steel component in pursuit of cost effectiveness. Nanostructured WC-10%Co-0.9%VC and 316L SS powders were used as starting materials. A polymer-wax binder composed of polyethylene copolymer-ethylene vinyl acetate, carnauba wax, paraffin and stearic acid was used to prepare the hardmetal feedstock in a laboratory kneader with z-mixing blades at a temperature of 120°C. The assembled PIM parts were sintered in a laboratory sintering furnace under nitrogen according to different sintering cycles in the temperature range of 1320-1360°C with a heating... 

Salicylic acid-beeswax microspheres were prepared by melt dispersion technique. The effects of formulation parameters on the microscopic characteristic, drug loading and cumulative amount of released drug were investigated by experimental design. Results showed that all of the microparticles were spherical with porous surfaces. The average size of microspheres was 2448 m, the drug content was in the range of 2245 and the encapsulation efficiency was 4693. Drug loading was influenced by emulsification speed as a main factor. All the microspheres had a burst release initially. The emulsifier concentration did not have a significant effect on drug release. The release behaviour of microspheres... 

A rapid wax injection tool of a gearbox shift fork was designed, simulated, and manufactured using rapid prototyping and rapid tooling technology to save time and cost of producing wax models used for the investment casting process. CAE simulation softwares, in particular, MoldFlow, are used to get wax injection moulding parameters such as filling parameters, temperature profiles, freeze time, speed, and pressure. The results of this research were compared with conventional wax model production methods. The criteria of such comparison were based upon parameters such as time, cost, and other related characteristics, which resulted in saving of 50% in time and 60% in cost. In this research,... 

A batch extraction of an essential amino acid, phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin, and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as the initial pH of the aqueous external phase, the electrolyte concentration in the aqueous internal phase, carrier, and surfactant concentration in the emulsion, the volume ratio of the organic to aqueous internal phase (Roi), the volume ratio of the W/O emulsion to the aqueous external phase (Rew) and time were examined and optimized using the Taguchi... 

A modified carbon paste electrode was prepared by incorporating TiO2 nanoparticles with bis[bis(salicylidene-1,4-phenylenediamine)molybdenum(VI)]. A mixture of fine graphite powder with 4 wt% of TiO2 nanoparticles was applied for the preparation of the carbon paste (by dispersing in paraffin) and finally modified with a molybdenum (VI) complex. The electrocatalytic oxidation of guanine (G) was investigated on the surface of the molybdenum (VI) complex-TiO2 nanoparticle modified carbon paste electrode (MCTNMCPE) using cyclic voltammetry (CV), differential pulse voltammetry (DPV), chronoamperometry (CHA) and chronocoloumetry (CHC). Using the modified electrode, the kinetics of G... 

Purpose - Dimensional accuracy analysis of wax model created by room temperature vulcanization (RTV) silicone rubber molding to be used in investment casting is presented. The purpose of this paper is to discuss the effective parameters of dimensional accuracy in RTV tooling technique. Design/methodology/approach - After producing a pattern by stereolithography (SLA) and then creating the RTV silicone rubber mold by the SLA pattern, dimensional accuracy of wax models produced by RTV tool are analyzed. Design of experiments (DOE) using the Taguchi approach is used for analysis and determination of optimum condition. Findings - Experiments show that the dimensional accuracy in RTV technique is... 

Effect of several auxiliary carbon sources such as crude oil, different precultures, and quality of adding crude oil in treatment of petroleum wax deposits by an isolated bacterial strain, BBRC9012, was investigated. First and second experiments which compered effect of molasses, glucose and crude oil, indicated that glucose and molasses causes more microbial growth, biosurfactant production and bioemolsification than crude oil. Both optometry and Surface tension measurements showed that using molasses-BHB preculture for wax treatment is not suitable and when crude oil is used as auxiliary carbon source a one day lag phase is unavoidable. It was also shown that when crude oil is added to... 

Ceramic suspensions were prepared from an alumino-silicate powder, polyethylene wax (PE-wax) as binder with additions of stearic acid (SA). The ceramic powder consisted of mullite, corundum and tridymite phases. The organic binders contained 3 to 8 wt.% ethylene-vinyl acetate (EVA) and were filled with various volume fractions of ceramic powder. The yield stresses of suspensions were estimated using shear stress-shear rate data measured at 90-120 °C. The addition level of EVA was shown to have a considerable effect on the yield stress of suspensions. The effect of EVA on the flow parameters was also investigated over the temperature range of 90 to 120 °C. It was shown that the addition of 5...