Sharif Digital Repository

In this work, simultaneous inferential control of particle size distribution (PSD) and molecular weight distribution (MWD) in a semi-batch emulsion polymerization reactor of styrene has been addressed. Using a comprehensive dynamic model for PSD and MWD predictions and performing a sensitivity analysis, it has been revealed that free surfactant and chain transfer agent (CTA) concentrations in the reactor are the most suitable candidates for inferential control of PSD and MWD, respectively. To control concentrations of these species in the reactor, their inlet feed flow rates are used as manipulated variables. It is assumed that the concentration of CTA is measured infrequently and therefore... 

The authors carried out the study to prepare chitosan N-isopropylacrylamide hydrogel via heating and radiation processes. Properties investigation of prepared samples revealed that radiation prepared samples show higher yield and swelling ratios in comparison with the heating prepared ones. Effects of hydrogel addition to drilling mud on its important rheological properties such as apparent viscosity, plastic viscosity, and stress-strain behavior are measured. The rheological properties of hydrogel were compared with cellulosemethylcarboxyl and resins that are widely used in drilling fluid. The results demonstrate that whereas linear polymer effects on mud properties are more significant in... 

In this work, a reliable dimensionless correlation is proposed for prediction of permeability reduction rate in porous media, which is verified by experimental data obtained in this work in glass bead and sand pack as well as the core data from the literature. Although this correlation is based on the data which were obtained in our work in glass bead and sand-packed media at low pressure, it shows considerable flexibility to match with the extracted data for sandstone cores at high pressure, various flow rates, different temperatures and concentrations of calcium, and sulfate ions in brine solutions. In addition, a novel relationship for predicting the rate of precipitation of CaSO4 in... 

In this work, an experimental and theoretical study has been conducted to investigate the permeability reduction due to CaSO4 scale deposition in packed column porous media. Permeability reduction by calcium sulphate deposition follows a systematic trend considering various important parameters that are affected in this complex process. Hence, a novel dimensionless model has been proposed for the prediction of permeability reduction rate with high accuracy. The developed model is based on the data obtained from glass bead and carbonate grain packed column at low pressure. The proposed model was validated with Berea sandstone cores data at high pressure (100-20,678 kPa), various flow rates... 

In this paper a nonlinear dynamic model for drill string in inclined well drilling is developed. Effects of drilling mud flow rate, weight on bit, angular velocity along with viscous damping on stability and vibration of the drill string are studied. Findings indicate the nonlinear effects are significant on the results. The effects of drilling mud flow rate and weight on bit on the natural frequencies and time responses are evaluated. Enhancement of drilling mud flow rate results in decreasing of natural frequencies and vibrational amplitude, while increasing the weight on bit, leads to decrease of the natural frequencies and increase the vibrational amplitude. © JVE INTERNATIONAL LTD  

Asphaltene deposition in a reservoir severely reduces the effective permeability and results in a reduction in oil production. The main term in asphaltene deposition modeling in the porous media is pore surface deposition. Previous models do not describe the effects of different parameters (i.e., concentration, velocity, and temperature) on the pore surface deposition term. We report the results of a series of experiments carried out to study the effects of the above parameters on the surface deposition term using an accurate thermal method. Based on these data, a new expression for the surface deposition term has been developed and implemented in asphaltene deposition modeling. The... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

In drilling industry, barite particles settling and barite sag as a major problem can potentially impose significant operational issues. Static conditions, in which well undergoes an extended shut-in period, could occur during different drilling and completion operations such fishing operation, tripping, and logging. Despite its importance, such phenomenon is not well understood yet. To avoid issues related to barite settlement and barite sag, a good understanding of the impact of different drilling parameters on barite settlement and sag phenomenon is required. Recently, the mathematical formulation and modeling of settlement and sag processes have gained more attention. In order to better... 

There are several types of drilling methods to increase the productivity of a well, such as horizontal drilling, extended reach horizontal drilling and Multilateral (ML) drilling. It is thought that ML wells could be more economic with higher productivities than horizontal or extended reach horizontal wells. Advances in ML drilling promise reduced costs, greater flexibility and increased profit potential. In the last 20 years, thousands of ML wells have been drilled worldwide, but only a small percentage of the total number of wells is multilateral. The probable reason may be lack of concise information and misconceptions surrounding the costs and perceived risks. However, recent advances in... 

Block shear failure in the base metal of welded steel connections is a potential failure mode affecting many steel structures. However, there are only a few studies on the block shear failure of welded connections under combined shear and axial loading. Combined loading is defined as a simultaneous loading parallel and perpendicular to the weld lines (or an inclined loading) in the plane of the connecting plate. In this research, a nonlinear finite element model is used to study the effect of connection geometry and weld group configuration on the block shear strength of welded connections under combined loading. In current design standards, the block shear failure planes are assumed to... 

Appropriate execution of drilling operation, in particular for high pressure and high temperature wells, requires accurate knowledge of behavior of the drilling fluid density as a function of pressure and temperature. In this communication, a novel mathematicalbased approach is presented to develop a reliable model for predict the density of four drilling fluid including water-based, oil-based, Colloidal Gas Aphron (CGA) and synthetic. To pursue our objective, a predictive model is proposed using a robust soft computing approach namely least square support vector machine (LSSVM) modeling optimized with coupled simulated annealing (CSA) optimization tool. Moreover, leverage approach, in which... 

Water injection into petroleum reservoirs is widely performed around the world for enhancing oil recovery. Understanding the underground fluid path is an important factor in improving reservoir performance under waterflooding operation. This may be used to optimize subsequent oil recovery by changing injection patterns, assignment of well priorities in operations, recompletion of wells, targeting infill drilling, and reduce the need for expensive surveillance activities. Most of the hydrocarbon reservoirs are equipped with sensors that measure the flow rate, pressure, and temperature in the wellbores continuously. Valuable and useful information about the interwell connections can be... 

Asphaltene deposition causes serious problems in the oil industry. Variation of oil composition and reservoir pressure is reported to be the most important factors that influence asphaltene deposition from reservoir oil. In this study, a mathematical model was developed to simulate asphaltene deposition during primary depletion and CO2 injection. The main purpose of this study is to investigate and to compare asphaltene deposition mechanisms due to primary depletion and CO2 injection. The solid model as thermodynamic model was applied to investigate asphaltene precipitation. A numerical model was established to the governing equations both in space and time and model parameters were... 

Application of the colloidal gas aphrons (CGAs) in minimizing formation damage by plugging pore mechanism is now wildly accepted due to numerous successful field experience. One of the pivotal factors which affects the pore blockage ability of micro-bubbles is their stability. This experimental study tries to investigate the possible synergistic effect of nanoparticles on improving the stability and other properties of non-aqueous CGA drilling fluids, in both bulk and porous media. In particular, two types of hydrophobic nanoparticles including silicon dioxide nanopowder coated with 2 wt% Silane and nanoclay, in presence of a treated version of bentonite (Bentone 34) as a stabilizer and... 

The knowledge of the connectivity across the reservoir not only helps to find out the potential oil recovery within a particular well configuration but also affects on the other reservoir engineering decisions such as infill drilling. Connectivity also controls the swept fraction of the hydrocarbon in place in secondary displacement other than the recoverable rates of the hydrocarbon. Most of the time we need a fast estimation of connectivity for decision making during field development. Percolation theory is a very useful tool to get this goal. According to this fact that the results of this method are universal, they could be used widely. During this study a percolation model is developed... 

Fretting fatigue occurs in engineering applications where two interacting surfaces are subjected to fluctuating forces. The fluctuating forces occasionally act as a combined loading condition. The present paper investigates fretting fatigue behaviour of 316L stainless steel under such combined (i.e. tensile and bending) loading conditions. A new fixture was developed in order to apply bending and tensile loads simultaneously. Using this fixture, the effect of different bending-to-tension ratios was investigated. The results showed that increasing the contribution of bending load improves fretting fatigue life. On the other hand, increasing grain size decreases fretting fatigue life.... 

Filtrate and solid invasion from drilling fluids are two key sources of formation damage, and can result in formation permeability impairment. Typically, spurt invasion of mud solids causes the evolution of an external mud cake which tends to reduce further solids and filtrate influx. However, uncontrolled spurt and filtrate invasion are detrimental because they reduce the permeability of the formation. Mud composition, formation rock's permeability and porosity, and temperature can influence both spurt and filtrate invasion. The sizes of mud solids relative to the average pore size of a rock are also important in predicting the extent of mud invasion and permeability impairment. In this... 

A general modeling framework is presented for the development of the frequency equation of a microgyroscope, which is modeled as a suspended cantilever beam with a tip mass under general base excitation. Specifically, the beam is considered to vibrate in all the three directions, while subjected to a base rotational motion around its longitudinal direction. This is a common configuration utilized in many vibrating beam gyroscopes and well drilling systems. The governing equations are derived by using the Extended Hamilton's Principle with a general 6-dof base motion. The natural frequency equation is then extracted in a closed-form for the case where the beam support undergoes longitudinal... 

In recent decades, utilizing of water-based muds (WBMs) in drilling oil and gas wells is ever increasing comparing to oil-based muds and synthetic-based muds due to the lower environmental issues. However, the main drawbacks with WBMs are rheological properties inefficiency and shale swelling which have caused attentions turn to improvement of WBMs’ rheological properties. In this study, the effects of various nanoparticles (NPs) namely titanium dioxide (TiO2), silicon dioxide (SiO2), and zinc oxide (ZnO) on improving rheological properties and shale recovery rate of a WBM sample at two temperatures (25 and 50 °C) were investigated. The concentrations of NPs in the base mud were set at 0.01,... 

A thorough understanding and accurate prediction of non-Newtonian fluid flow dynamics in rotating annular media are of paramount importance to numerous engineering applications. This is in particular relevant to oil and gas industry where this type of flow could occur during, e.g., drilling, well completion, and enhanced oil recovery scenarios. Here, mathematically we report on physical-based (numerical) and data-driven (intelligent) modeling of three-dimensional laminar flow of non-Newtonian fluids driven by axial pressure gradient in annular media that consist of a coaxially rotating inner cylinder. We focus on the dynamics of pressure loss ratio (PLR)—the ratio of total pressure loss in...