Sharif Digital Repository

Beside their worldwide abundance, oil recovery from fractured carbonate reservoirs is commonly low. Such reservoirs are usually oil-wet, thus, waterflooding leads into early breakthrough and low recovery due to the high conductivity of the fracture network, negative capillary pressure of the matrix and, consequently, the poor spontaneous imbibitions of water from fractures into the matrix during the course of waterflooding. In such problematic reservoirs, changing the wettability of the matrix toward water-wetness can improve spontaneous imbibition by changing the sign and, thus, the direction of capillary forces, resulting in an improvement of waterflood efficiency and, consequently, oil... 

Abstract Miscible carbon dioxide (CO2) flooding has become the most commonly and favorable approach in Enhanced Oil Recovery (EOR) because of its high oil reservoir sweep efficiency and contribution to the reduction of greenhouse gas emissions. Despite this, it can significantly favor the asphaltene deposition, which leads to the wettability reversal and formation damage. A novel experimental setup was utilized to study asphaltene deposition on the model rock at reservoir condition. The evolution of asphaltene deposition was monitored by a microscope; then analyzed by image processing software to check the amount of deposited asphaltene and its size distribution at different... 

In the present study, the effect of two different kinds of surfactants namely conventional (Sodium dodecyl benzene sulfonate (SDBS)) and ionic liquid (IL)-based surfactants are investigated on the tertiary oil recovery using relative permeability concept. In this way, besides the Amott wettability index measurement, unsteady state core flooding tests are performed to not only find the effect of surfactant injection on tertiary oil recovery, but also to investigate their effects on relative permeability of carbonate rocks. In addition, for more reliable conclusions regarding the possible mechanisms, interfacial tension (IFT), compatibility and emulsification tests are carried out as a... 

Most of the reported robust and non-robust optimization works are formulated based on a single-objective optimization, commonly in terms of net present value. However, variation of economical parameters such as oil price and costs forces such high computational optimization works to regenerate their optimum water injection policies. Furthermore, dynamic optimization strategies of water-flooding often lack robustness to geological uncertainties. This paper presents a multi-objective while robust optimization methodology by incorporating three dedicated objective functions. The goal is to determine optimized and robust water injection policies for all injection wells. It focuses on reducing... 

The present study aims at monitoring the bulk and bubble-scale behaviour of anionic polyacrylamide-sodium dodecyl sulphate stabilized foam in the absence and presence of oil. Dynamic stability tests provided results indicating that polymer increases the foam dynamic stability and decreases the drainage. Oil slows down the drainage rate of polymer-surfactant foam. In the absence of oil, foam is drained gradually/smoothly whereas remarkable fluctuations are evident in drainage graphs when oil is present. The Hele-Shaw cell was employed to conduct bubble-scale as well as statistical analyses on how foam texture is influenced by a polymer-surfactant system and hydrocarbon. Bubble-scale analyses,... 

With the decline in oil discoveries over recent decades, it is believed that enhanced oil recovery (EOR) technologies will play a key role to meet energy demand in the coming years. Polymer flooding is used commonly worldwide as an EOR process. In this work, we propose the synthesis of protected polyacrylamide (PAM) nanoparticles (PPNs) with a hydrophobic polystyrene (PSt) shell by one-pot two-step inverse emulsion polymerization, in which the PSt shell was created by surface polymerization. The shell protects the active PAM chains from premature degradation caused by the harsh environment in the reservoirs, controls the release of the chains as rheological modifiers, and additionally, it... 

High molecular weight polyacrylamide (PAM) nanoparticle dispersions are products with wide application possibilities, the most important of which is in petroleum industry such as drilling fluid and flooding agent in enhanced oil recovery. For that aim, it is necessary to achieve complete control of the final dispersion and polymer properties during the synthesis step. In this work, PAMs were synthesized by inverse emulsion polymerization of aqueous acrylamide solution in cyclohexane in the presence of emulsifier mixture of Span 20 and Span 80. We present a comprehensive study of the effects of variation of all important reaction conditions (agitation rate, reaction time and temperature,... 

The chemical, thermal, and mechanical degradation of polymer chains under high salinity, temperature, and shear rates in oil reservoirs are the current challenges of the polymer flooding process. To answer such a complex requirement, recently, acrylamide (AM)-based thermoassociating graft copolymers (TAP) were synthesized that presented excellent performance as a viscosity enhancer, especially under high temperature and salinity conditions. The purpose of this study was to further investigate the effect of salinity, shear rate, mechanical strength, and adsorption of these TAPs on viscosity-enhancing performance at different temperatures. Finally, the performance of the TAPs was studied in... 

In the recent years due to increasing demand for energy and declination of reservoir production, an impressive notice on enhancement of oil recovery has been found. The gas injection especially carbon dioxide injection due to low cost and friendly environmentally of this approach the special attention to CO2 injection increased. The miscibility is known as key factor which effects on enhancement of recovery. The miscibility is controlled by interfacial tension of hydrocarbons and carbon dioxide so the importance of investigation of the interfacial tension becomes highlighted.in this investigation by using radial basis function (RBF) artificial neural network (ANN) as a novel approach the... 

Gas flooding is a practical secondary scenario for enhanced oil recovery. Channeling and fingering of the injected gas are the major problems facing this technique. These challenges can be mitigated by the injection of gas as foam. However, foam stability influences the overall efficiency of the process, which could be improved by nanoparticles (NPs). This work provides a theoretical and experimental analysis of the NPs wettability effects on foam behavior, in both static and dynamic states. The treated calcite (CaCO3) NPs along with a cationic surfactant (HTAB) were used for this purpose. By comparison of theoretical and experimental data, it was shown that the foam stability in the... 

Foam flooding has been applied as a promising method in enhanced oil recovery to obviate the challenges of gas flooding such as fingering, channeling and overriding. However, long-term foam stability is crucial for mobility control. In this work, the effective mechanisms on foam stability in the presence of CaCO3 nanoparticles were assessed both theoretically and experimentally. The static and dynamic behaviors of cationic surfactant (HTAB) foam in the presence of CaCO3 nanoparticles with different hydrophobicity were evaluated. The CaCO3 nanoparticles were treated with a series of long-chain fatty acids to generate a range of wettability. Afterward, the underlying mechanisms were revealed... 

Low Salinity Waterflooding (LSWF) has become a popular tertiary injection EOR method recently. Both fluid-fluid and fluid-rock interactions are suggested as the contributing mechanisms on the effectiveness of LSWF. Considering the contradictory remarks in the literature, the dominating mechanisms and necessary conditions for Low Salinity Effect (LSE) varies for different crude oil-brine-rock (CBR) systems. The aim of the present study is to investigate LSE for an oil field in the Middle East that is composed of separate sandstone and limestone layers. Contact angles and Interfacial Tension (IFT) are measured to have more insight on the CBR under investigation. Visual experiments were... 

Low Salinity Waterflooding (LSWF) has become a popular tertiary injection EOR method recently. Both fluid-fluid and fluid-rock interactions are suggested as the contributing mechanisms on the effectiveness of LSWF. Considering the contradictory remarks in the literature, the dominating mechanisms and necessary conditions for Low Salinity Effect (LSE) varies for different crude oil-brine-rock (CBR) systems. The aim of the present study is to investigate LSE for an oil field in the Middle East that is composed of separate sandstone and limestone layers. Contact angles and Interfacial Tension (IFT) are measured to have more insight on the CBR under investigation. Visual experiments were... 

Recently much attention has been paid to the use of low salinity water (LSW) as an enhanced oil recovery fluid. The change observed in recovery factor during LSW flooding is induced from changes in relative permeability and capillary pressure when different levels of salinity are used. However, a few researchers tried to evaluate how macroscopic flow functions depend on the salinity of the injected water. To this end, a series of oil displacement by water was performed on a sandstone rock aged with crude oil in the presence of connate water. The capillary pressure and relative permeability curves are evaluated from inverse modeling of the obtained pressure drop and oil production data. Then,... 

Gas injection process for more oil recovery and in particular CO2 injection is well-established method to increment oil recovery from underground oil reservoirs. CO2 sequestration which takes place during this enhanced oil recovery (EOR) method has positive impact on reducing the greenhouse gas emission which causes global warming. Direct gas injection into depleted oil reservoirs, encounters several shortcomings such as low volumetric sweep efficiency, early breakthrough (BT) and high risk of gas leakage in naturally fractured carbonate oil reservoirs. Carbonated water injection (CWI) has been recently proposed as an alternative method to alleviate the problems associated with gas... 

Carbonated water injection (CWI) is known as an efficient technique for both CO2 storage and enhanced oil recovery (EOR). During CWI process, CO2 moves from the water phase into the oil phase and results in oil swelling. This mechanism is considered as a reason for EOR. Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials. Generally, instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon. Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery... 

Carbonated water injection (CWI) is known as an efficient technique for both CO2 storage and enhanced oil recovery (EOR). During CWI process, CO2 moves from the water phase into the oil phase and results in oil swelling. This mechanism is considered as a reason for EOR. Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials. Generally, instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon. Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery... 

This work concerns with experimental investigation of CO2 WAG injection to light crude oil in near miscible conditions which has been rarely attended in the available literature. Here, several core flood experiments at three constant injection rates and four WAG ratios are conducted on sandstone rocks saturated with light crude oil in presence of saline water. The results showed that higher injection rate has a better performance regarding oil recovery for smaller PVs of injected fluids, while lower injection rate showed higher ultimate recovery for a 30% increase in injected PVs. Secondary continuous gas injection showed a superior performance than all the other WAG injections in different... 

In this paper, we derive the rate of route discovery process for finding a randomly chosen destination in large wireless networks. The well-known protocol for route discovery is flooding in which each node simply rebroadcasts the route request packet once. Rate of route discovery process is defined as the inverse of time between transmitting two successive route request packets which shows how fast a node can request a route to its destination. Discovery time is another parameter of interest. For a single node discovering routes to its destination, at most the rate of Eθ (1/3√n) is feasible when n identical nodes are optimally placed in network area and the discovery time is of order... 

Petroleum industry is moving toward enhancing oil recovery methods, especially water-based methods, including low salinity and smart water flooding which water with an optimized composition is injected into the reservoir for improving oil recovery. Injection of water into the target formation is also a common operation in geothermal energy production. As the water is being injected into the reservoir, pressure and temperature change along the well column and cause scale formation. Mineral scale precipitation and deposition is a common problem for water injection wells which reduces the effective radius of the wellbore and affects the injection efficiency. In this paper, modeling scale...