Sharif Digital Repository

The efficiency of water flooding methods is known to improve by applying ion-tuned water injection. Although there is a consensus that such improvement happens through reversing reservoir wettability characteristics to more water-wet state, the true impact of ions is still ambiguous among contradictory debates. The well-known molecular dynamics (MD) simulation techniques would shed light on such ambiguities to gain deep atomic-scale understanding of the process. Results from MD simulations show that the presence of Na+ and Cl¯ ions leads to the formation of an electrical double layer in adjacency of calcite surface while Mg2+ ions dominantly make complexes with hydrocarbons throughout the... 

Condensate and water banking around gas condensate wells result in vital well deliverability issues. Wettability alteration of near wellbore region to gas wetting condition is known to be the most novel and the only permanent method, to improve condensate well productivity. In this work, a water based nanofluid is used to change the wettability of sandstone reservoir rocks from strongly liquid wetting to intermediate gas wetting condition. Static contact angle measurements demonstrated significant increase of liquid phase contact angle as a result of chemical treatment with SurfaPore M nanofluid. The characteristics of SurfaPore M adsorption on sandstone rock are quantified through kinetic... 

To obtain potentially applicable microorganisms to an effective in situ microbial enhanced oil recovery operation, bacteria that were compatible with the harsh conditions of a petroleum reservoir were isolated from a crude oil sample. The application of an oil spreading technique showed that all of the isolates were capable of producing biosurfactants from both the glucose and crude oil as carbon sources. The secreted biosurfactants could at least reduce the surface tension 20 mN/m and for one of the isolates; the surface tension value dropped below 40 mN/m. In addition, the contact angle measurements revealed that the produced biosurfactants could effectively alter the wettability of the... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based... 

Carbon dioxide miscible flooding has become a popular method for Enhanced Oil Recovery (EOR) because it not only efficiently enhances oil recovery but also considerably reduces green house gas emissions. However, it can significantly cause asphaltene deposition, which leads to serious production problems such as wettability alteration, plugging of the reservoir formation, blocking the transportation pipelines, etc. It is crucial to investigate the effects of different factors on asphaltene deposition. A novel experimental setup was prepared to employ a high-pressure visual cell for investigation of asphaltene deposition on a model rock under typical reservoir conditions. The evolution of... 

Precipitation of asphaltene leads to rigorous problems in petroleum industry such as: wettability alterations, relative permeability reduction, blockage of the flow with additional pressure drop in wellbore tubing, upstream process facilities and surface pipelines. Experimentally determination of the asphaltene precipitation is costly and time consuming. Therefore, searching for some other quick and accurate methods for determination of the asphaltene precipitation is inevitable. The objective of this communication is to present a reliable and predictive model namely, the least - squares support vector machine (LSSVM) to predict the asphaltene precipitation. This model has been developed and... 

This research provides an atomistic picture of the role of ions in modulating the microstructural features of an oil-contaminated calcite surface. This is of crucial importance for the rational design of ion-engineered waterflooding, a promising technique for enhancing oil recovery from carbonate reservoirs. Inspired by a conventional lab-scale procedure, an integrated series of molecular dynamics (MD) simulations were carried out to resolve the relative contribution of the major ionic constituent of natural brines (i.e., Na+, Cl-, Mg2+, Ca2+, and SO42-) when soaking an oil-bearing calcite surface in different electrolyte solutions of same salinity, namely, CaCl2, MgCl2, Na2SO4, MgSO4, and... 

One of the key open questions in the area of low or controlled salinity water flooding (LSWF or CSWF) is how the observed oil recovery at macro-scale (e.g. Darcy or core-scale) can the explained and what underlying microscopic mechanisms drive it. Thus far, the micromodel investigation of LSWF has been limited to sandstones, remaining challenging to apply to carbonates. In this paper we aim to i) extend the capability to fabricate a novel calcite micromodel using Iceland spar calcite crystal, ii) investigate the pore-scale mechanisms leading to oil recovery from carbonates. A target crude oil-brine-rock (COBR) system was first selected. To screen potential brines which can produce... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

The low salinity water injection has become one of the most important studies in the oil industry for improving oil recovery compared to conventional seawater injection. Thus, extensive studies have been conducted in carbonate and sandstone reservoirs to investigate how the physical properties of rocks and the chemical composition of fluids influence low salinity effect, while, the carbonate reservoir rocks requires more investigation of the effect of molecular and/or ionic interactions. In this experimental work, the effectiveness of various water flooding schemes in carbonate reservoir rock samples is investigated. In this regard, the oil recovery potential of seawater (SW), reservoir... 

Dilute Surfactant flooding has been recognized as one of the significant processes in chemical flooding. Many oil reservoirs became appropriate candidates for surfactant/water flooding when screening criteria was developed. Injected surfactant tried to mobilize the residual oil that was trapped in interstice. The main contributing mechanism to enhance oil recovery by surfactant flooding was defined as rock wettability alteration. Wettability is one of the substantial parameters to choose the best approach for a successful surfactant flooding in which tiny change in wettability will lead to improve oil recovery fundamentally. In this experimental study the effect of different aging time and... 

Wettability alteration in porous media is one of the mechanisms for enhancing oil recovery through injecting low-salinity water into carbonate reservoirs, in which active ions can remove the carboxylic oil component from the rock surface, altering the rock's wettability toward a water-wet condition. This study investigated the concomitant effects of low-salinity water and hydrophilic SiO2 nanoparticles on oil-wet dolomite rock. Results revealed that low-salinity water coupled with hydrophilic nano-SiO2 in oil-wet dolomite rock remarkably affected the wettability alteration of the rock, showing that the simultaneous presence of ions in water and hydrophilic nano-SiO2 led to considerable... 

The condensation process is of great importance in many heat transfer devices in which a large amount of energy must be transferred. Furthermore, condensation is a crucial part of energy conversion and affects the energy efficiency of thermal desalination plants and solar stills. During the condensation process in solar stills, an essential part of the energy is transferred through the condensation surface to produce fresh water. Therefore, the condensation surface plays a significant role in the working efficiency of solar stills. The wettability of the condensation surface influences the condensation mechanism, which, in turn, affects the efficiency of solar stills. This study aims to... 

Environmentally responsive surface-modified nanoparticles are colloidal nanoparticles coated with, at least, two physicochemically distinct surface groups. Recent advances in the synthesis and production of nanoparticles have enabled the production of environmentally responsive surface-modified nanoparticles with both hydrophilic and hydrophobic surface groups. These nanoparticles act like colloidal surfactants. In this paper, environmentally responsive surface-modified silica nanoparticles are synthesized and used for enhancement of oil recovery. For this purpose, silica nanoparticles are coated with polyethylene glycol chains as hydrophilic agent and propyl chains as hydrophobic agent at... 

Smart water injection is determined as an effective EOR process to change the wettability and interfacial tension for better micro/macro sweep efficiencies. This water contains reactive ions such as Mg ∧(2+), Ca ∧(2+) and SO-4 ∧(2-) which can act as potential determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective waterflood, especially in tight carbonate reservoirs, is the incompatibility between the formation brine and the injecting water. This research work aims to investigate the most important challenge of waterflooding process related to the possible formation damage because of inorganic scale deposition during... 

Application of nano or biomaterials for enhanced oil recovery (EOR) has been recently much attended by petroleum engineering researchers. However, how would be the displacement mechanisms and how would change the recovery efficiency while nano and biomaterials are used simultaneously is still an open question. To this end, a series of injection tests performed on micromodel containing shale strikes. Three types of biomaterials including biosurfactant, bioemulsifier, and biopolymer beside two types of nanoparticles including SiO2 and TiO2 at different concentrations were used as injection fluids. The microscopic as well as macroscopic efficiency of displacements were observed from analysis of... 

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

Interaction between rock-fluid and fluid-fluid can have a significant effect on oil recovery. Changing the wettability of reservoir rock toward more water-wet or less oil-wet state is one of the expected mechanisms during low salinity water injection (LSWI). pH and salinity are of the most eminent factors of injection water controlling the wettability state of a crude oil/brine/rock system during any waterflooding operation. A small change in pH can affect the surface charges at the rock/water and oil/water interfaces leading to wettability alteration in a porous medium. In this study, the synergic effect of salinity and pH on the wettability state of carbonate rocks is evaluated through...