Sharif Digital Repository

Vanadium supported on spinel cobalt ferrite nanoparticles was synthesized and characterized using Fourier transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis and transmission electron microscopy. For the first time, the prepared material was used for the catalytic degradation of methylene blue as an organic dye in the presence of hydrogen peroxide as a green oxidant and NaHCO3 as a co-reagent at room temperature. The dependency of removal percentage on various parameters such as amount of catalyst, pH, reaction time and temperature and the effect of radical scavenging agents were studied. Finally, recoverability and reusability of the vanadium supported on... 

Partial substitutions of Pr and Ce are known to suppress the superconducting state in REBa2Cu3O7-δ systems. We have substituted Ce for Gd in Gd1-xCexBa 2Cu3O7-δ compounds with x = 0.0-0.6 by the standard solid-state reaction technique. X-ray diffraction (XRD) experiments are performed and their results are refined by the Rietveld method. XRD analysis shows a predominantly single-phase perovskite structure with few impurity phases. Our resistivity results show that, by increasing the Ce content, Tc decreases, the transition temperature width increases, and in the normal state a metal-insulator transition (MIT) occurs at x c = 0.12. The normal state resistivity of the samples and their slopes... 

In this study, firstly, a double-reservoir and switchable prototype of a micro-chip along with the respective holders were fabricated. A cyclic desorption process using microliter volume of organic solvent was adopted to prevent any outdoor contamination. As extractive phases, two identical sheets of electrospun polyamide/polypyrrole/titania nanofibers were synthesized using core–shell electro-spinning technique and utilized for determination of memantine in plasma samples. Field emission scanning electron microscopy images showed a high degree of porosity and homogeneity throughout the sheet structure. Also, energy dispersive X-ray analysis confirmed the presence of titania, while the... 

Purpose: This study aimed to investigate the biomechanical impact of laminectomy on cervical intersegmental motion and load sharing using a parametric patient-specific finite element (FE) model towards providing clinicians with a viable quantitative tool for informed decision-making and improved surgical planning. Methods: Ten subject-specific nonlinear osteo-ligamentous cervical spine (C3–C7) FE models were developed using X-ray image-based algorithms. The models were used to evaluate the effect of laminectomy on lower cervical spine biomechanics for two-level (C3–C4) and three-level (C3–C5) laminectomy procedures. Results: The average cervical spine ranges of motion (ROM) for the pre-op... 

Single-crystal hydroxyapatite (HAp) nanorods and nanogranules have been synthesized successfully by a mechanochemical process using two distinct experimental procedures. The experimental outcomes are characterized by transmission electron microscopy (TEM), and powder X-ray diffraction (XRD) techniques. In this work, the feasibility of using polymeric milling media to prepare hydroxyapatite nanoparticles is described. The resulting hydroxyapatite powder exhibits an average size of about 20 to 23 nm. Final results indicate that the proposed synthesis strategy provides a facile pathway to obtain single-crystal HAp with high quality and suitable morphology. © 2008 Elsevier B.V. All rights... 

High silicon fly ash (HSFA) utilized as a source of silicon in synthesizing of Na-A, -X and -Y zeolites through alkali fusion followed by hydrothermal treatment at 100 °C for 12 h. Various types of zeolites with different degrees of purity were prepared by changing Si/Al ratio of the reaction mixture from 1.6 to 3.0. In addition, exact boundaries of this ratio for synthesis of each zeolite type were determined. Furthermore, the effect of NaOH amount utilized in alkaline fusion step on crystalinity of samples investigated. The synthesized zeolites were characterized using various techniques including; XRD, TGA, FTIR, SEM and BET. The ion-exchange behaviors of zeolitic samples tested with... 

The unsymmetrical tetradentate Schiff base H2L was prepared by the reaction of salicylaldehyde with the mono Schiff base derived from o-phenylenediamine and o-hydroxyacetophenone (HL1). NiL and CuL complexes were prepared and characterized by 1H NMR, IR and single crystal X-ray structure determination. Crystal data for NiL: triclinic space group P-1, a = 7.190 (2) Å, b = 13.059 (4) Å, c = 17.867 (10) Å, α = 74.888 (10)°, β = 84.206 (10)°, γ = 86.542 (2)° and z = 4. Crystal data for CuL: monoclinic space group P2I/n, a = 12.8209 (6) Å, b = 6.988 (3) Å, c = 18.601 (9) Å, β = 105.15° and z = 4. The Ni and Cu atoms have a slightly distorted square-planar coordination geometry  

The bidentate carboxamide ligand N-(thiazole-2-yl) picolinamide (LH) was synthesized in the environmentally friendly ionic liquid TBAB, and the five-coordinated CuII-complex, [Cu(L)2(H2O)].CHCl3 (1) was synthesized from LH and copper(II)acetate. Cupric oxide [CuO] nanoparticles (2) have been prepared by the thermal decomposition of (1) as a new precursor at 600 °C for 3 h under air atmosphere. (1) was characterised using FT-IR spectroscopy, elemental analyses and its solid state structure was confirmed by single crystal X-ray diffraction. (2) were identified by FT-IR spectroscopy, X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray analysis and thermo-gravimetric... 

In the present paper, the fabrication and characterisation of typical high temperature Ni(Ti+ Hf) alloyed thin films produced by simultaneous sputter deposition from separate elemental Ni, Ti and Hf targets are presented. Film composition, determined by energy dispersive X-ray spectroscopy, was controlled by adjusting the ratio of powers applied to each target. Films deposited at room temperature had an amorphous structure and subsequent annealing at 550°C was carried out in a high vacuum environment, based on crystallisation temperature evaluation by differential scanning calorimetry (DSC). High temperature martensitic transformation, confirmed by DSC and variable temperature X-ray... 

A mechanochemical method was applied to prepare bismuth oxybromide (BiOBr) nanoplates using bismuth nitrate pentahydrate and potassium bromide for 15 (A15), 30 (A30) and 60 (A60) minutes. Scanning electron microscopy studies showed that all the products were comprised of nanoplates. Aggregated nanoplates along with microblocks were observed for A15 and A30 and the entire morphology was not homogenous. The morphology of A60 was uniform and consisted of thin and isolated nanoplates. Evaluation of the X-ray diffraction patterns showed that the purity and crystallinity of the products improved by increasing the milling time. The energy dispersive X-ray analysis confirmed the high purity of the... 

Hydroxyapatite (HAp) nanostrips were rapidly obtained during a mild microwave heating method. Applying microwave irradiation to Ca(NO3)2·4H2O/CTAB/Na2HPO4 precursor solution, the HAp precipitation process was occurred directly and without common crystallographic transformations including dissolution and slow recrystallization. The cationic surfactant CTAB was used as a soft template to modify nucleation and growth process. TEM investigations showed that the fabricated nanostrips had a width and length of about 10 and 55 nm, respectively. The X-ray diffraction pattern revealed that the fabricated well-crystallized and high purity hydroxyapatite nanostrips had a pattern similar to the bone... 

In this paper, preparation of polyethylene/clay nanocomposites (PECNC) by in situ Ziegler-Natta catalyst polymerization was investigated. A Ziegler-Natta catalyst was first supported on montmorillonite (MMT) type clay and subsequently used for polymerizing ethylene. Clay and clay supported catalyst were characterized by Fourier transmission infrared and ICP method. X-ray diffraction (XRD) and transmission electron microscopy results show that silicate layers of the mineral clay in prepared nanocomposites were intercalated and exfoliated in the polymeric matrix. Differential scanning calorimetry results show that the prepared nanocomposites have higher crystallization temperature than pure... 

In this study, a low–cost microfluidic device from polymethyl methacrylate was fabricated by laser engraving technique. The device is consisted of a central chip unit with an aligned microchannel. Both sides of the engraved microchannel were sandwiched by two synthesized sheets from polyamide/titania (PA/TiO2) hollow nanofibers as extractive phases. The inlet and outlet of the device were connected to the polyether ether ketone tubes, while a peristaltic pump was used to deliver both sample and desorbing solvent through the microchannel. The recorded scanning electron microscopy images from the surface of the synthesized PA/TiO2 nanofibers, exhibit a good degree of homogeneity and porosity... 

Abstract: The effect of annealing temperature on the properties of silver thin films has been investigated. Ag thin films have been deposited on glass substrates by electron beam coating, afterward subjected to annealing in a mixed ambient of air and oxygen at 100, 200, 300, 400 and 500°C for 3 h and then cooled slowly. The crystallographic structures of the Ag thin films were studied as a function of the annealing temperature. X‑ray diffraction (XRD) was used to estimate the crystallographic texture and grain size. All the films were found to have crystalline structure. The film microstructures were studied by scanning electron microscopy (SEM). The XRD and SEM results confirmed the... 

While the photocatalytic degradation of various organic compounds under UV light irradiation has been widely investigated, visible-light-induced photocatalytic degradation of low levels of pollutants such as dibenzothiophene (DBT) is occasionally reported. In the present work, lanthanide/polyethylene glycol-modified TiO2 (La/PEG/TiO2) has been successfully synthesized by a sol-gel method. The photocatalyst was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV-Vis diffusive reflectance spectroscopy, and energy dispersive X-ray analysis. Moreover, the photocatalytic degradation of DBT under visible light irradiation is... 

Al-20Si-5Fe-2X (X = Cu, Ni and Cr) ribbons were produced by melt-spinning and consolidated by hot pressing at 400 °C for 60 min. The microstructure of the ribbons and the consolidated alloys was investigated using optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffractometry (XRD) method, and transmission electron microscopy (TEM). The hardness and compressive strength of the specimens at ambient and elevated temperatures were examined. The microstructure of the ribbons exhibited featureless and dendritic zones. Results of XRD and TEM showed formation of spherically shaped Si particles with an average diameter of 20 nm. Ultrafine Si (110-150 nm) and iron-containing... 

Gradual chemical (displacement) reaction between CuO and Al powders during high-energy attrition milling under a high purity argon atmosphere was studied. Differential thermal analysis (DTA), X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques were employed to study the solid-state reaction. It was shown that the solid-state reaction occurred during mechanical alloying (MA) and resulted in the dissolution of copper into the aluminum lattice and formation of nanometric alumina particles. The reinforcement particles were mostly distributed at the grain boundaries of Al matrix with an average crystallite size of about 50 nm. In DTA curve of the milled powders, a small... 

Thermoplastic starch (TPS), as a natural based polymer, is known to have the capability to be used in biological applications due to its biocompatibility and biodegradability. In this study, mechanical properties of TPS are enhanced by incorporating bioactive β-tricalcium phosphate (β-TCP) particles for bone tissue engineering applications. Starch-based nanocomposites containing 3, 5, and 10 wt% of β-TCP nanoparticles (TT3, TT5, TT10) were made using a co-rotating twin-screw extruder. Dynamic light scattering (DLS) and X-ray diffraction (XRD) techniques were employed to analyze the nanocomposites. Moreover, degradability, swelling degree, and biomineralization in a simulated body fluid (SBF)... 

In this research work, to reduce permeability of polyethylene vinyl acetate) packaging films, organoclay nanocomposites of these thermoplastics were prepared by solution method. Organoclay are mixed with polyethylene vinyl acetate (EVA) with 18 and 28% of vinyl acetate (VA) content in solution phase. Solutions of 3, 5 and 7% of organoclay are prepared under reflux condition and then nanocomposite films are prepared by thermal phase inversion method. Morphological and gas barrier properties of different prepared samples have been investigated. Morphology of prepared nanocomposite films and order of exfoliation of clay were investigated using X-ray diffraction (XRD) and transmission electron... 

Attempts have been made to quantify the amount of contaminants absorbed by liquid metal from commercial ZrO2-, Al2O3-, and SiC-base crucibles used for vacuum melting of Ni-45 wt pet Ti alloy. The molten alloy was held under vacuum for 90 minutes at 1450°C to become homogenized. Reactions between the liquid metal and the crucible were investigated by visual observation, chemical analysis, scanning electron microscopy (SEM) image processing, and X-ray mapping. The relative degree of contamination declined in the following sequence: commercially pure SiC > SiC-5 wt pct Al2O3-5 wt pet SiO2] > slurry cast alumina > recrystallized alumina > zircon type A > oxygen deficient high-purity zirconia....