Sharif Digital Repository

In this study, the fatigue behavior of composite reinforced cracked aluminum 1050 plates is investigated experimentally and numerically. The tests are conducted in four different stress ratios between 0 and 1. At first step, plates with similar cracks and geometries have been prepared. Then the glass/epoxy patches have been attached to the cracked plates using Araldite 2015 adhesive. Fatigue load has been applied to three cases of samples including non-patch, one-side patch and two-side patch, where in all stress ratios the maximum force is considered constant. A three-dimensional finite element analysis is developed in ABAQUS. A good correlation between finite element results and the... 

Noise analysis techniques including Feynman-α (variance-to-mean) and Rossi-α (correlation) have been simulated by MCNP computer code to calculate the prompt neutron decay constant (α0), effective delayed neutron fraction (βeff) and neutron generation time (Λ) in a subcritical condition for the first operating core configuration of Tehran Research Reactor (TRR). The reactor core is considered to be in zero power (reactor power is less than 1 W) in the entire simulation process. The effect of some key parameters such as detector efficiency, detector position and its dead time on the results of simulation has been discussed as well. The results of proposed method in the current study are... 

In this paper, a two-component Lattice Boltzmann Method (LBM) has been utilized to simulate the natural convection of TiO2-water nanofluid in a curved geometry. The main purpose of this research is to study the effect of nanoparticle size and also boundary conditions on the thermal characteristics of the nanofluid. Furthermore, the effect of Rayleigh number (Ra) and volume fraction of nanoparticles (ϕ) on the average Nusselt number (Nuave) have been investigated. Two different thermal boundary conditions, namely adiabatic and constant temperature, have been considered in the current work for the curved boundaries. The Rayleigh number varies from 103 to 109. Four different sizes, namely 10,... 

Face Analysis is an important task in image processing. Most of these tasks centralized on face recognition and detection. One of different ways for deceiving automatic face analysis systems is mark notation on the skin. On the other hand some applications attempts to eliminate defects of the face. Hence, in this paper we try to detect and remove skin marks on the face, whether they're natural or not. Our algorithm passes face image through appropriate filters to get mark candidates and then create a graph space using 8-point neighborhood relations of mark candidates image pixels. Then we compute probabilities of each mark candidate using four measures based on intensity of occurrence, shape... 

This paper presents a new approach for fuel burn up evaluation and radioactive inventory calculation used in Tehran Research Reactor. The approach is essentially based upon the utilization of a program written by C# which integrates the cell and core calculation codes, i.e., WIMSD-4 and CITVAP, respectively. Calculation of fuel burn up and radioactive inventories has been done for 26 core configuration of Tehran Research Reactor with HEU fuel element. The present inventory and fuel enrichment of each fuel element have been calculated  

The phase diagram of the strongly correlated Hubbard model with intrinsic spin-orbit coupling on the honeycomb lattice is explored here. We obtain the low-energy effective model describing the spin degree of freedom. The resulting model is then studied by the Schwinger boson and Schwinger fermion approaches. The Schwinger boson method elucidates the boundary between the spin liquid phase and the magnetically ordered phases, Neel order, and incommensurate Neel order. Increasing the strength of the spin-orbit coupling is shown to narrow the width of the spin liquid region. The Schwinger fermion approach sheds further light on the nature of the spin liquid phase. We obtained three different... 

The inhibition of mild steel corrosion in 0.5 M sulphuric acid by the symmetrical acetylenic alcohol 2- butyne-1,4-diol is investigated. Weight loss and electrochemical impedance data consistently indicate inhibition efficiencies up to 98%. Short-term impedance measurements reveal that the interfacial inhibition is a function of the exposure time, and that full performance is achieved faster as inhibitor concentration and temperature are higher. An infrared study of the surface film provides evidence that the film does not achieve its final state but after several hours. Atomic force Microscopy has been used for investigation the surface topography of metallic electrode. © 2009 by ESG  

Most seismic design codes accept heavy damages to buildings in case of large earthquakes, provided that they are prevented against collapse. However, this leads to unacceptable consequences, such as very large volume of the required reconstruction works, in large populated cities. One way to get rid of these adverse consequences is using the idea of combining rocking/seesaw motion of the building's structure and energy dissipation at base level to create buildings easily repairable even after a large earthquake. In the present study, this idea has been employed for designing steel buildings with seesaw motion capability by using a central massive column at ground floor, with elastic behavior... 

A new model on the evolution of dislocation structure of cell forming metals and alloys through severe plastic deformation is presented. Following previous approaches, the model considers a cellular dislocation structure consisted of two phases: cell interiors and cell walls. The model distinguishes edge and screw dislocations in terms of three categories: mobile dislocations, immobile dislocations in cell interiors and immobile dislocations in cell walls. Then considering physical and geometrical assumptions for each dislocation category, an evolutional law is derived, based on some dislocation interaction mechanisms such as dislocation generation, annihilation, locking and migration. The... 

Since the constitutive information is one of the most important aspects of material deformation analysis, here a new constitutive model is proposed that can investigate the behavior of material during intense deformation better than existent models. The model that is completely based on physical mechanisms can predict all stages of flow stress evolution and also can elucidate the effects of strain and strain rate on flow stress evolution of material during intense plastic deformation. Here as an application, implementation of the constitutive model in finite element method (FEM) is used to compare two methods of sever plastic deformation (SPD) processes of copper sheet; repetitive... 

In this study, a dislocation-based model is presented for investigating the evolution of micro structure and mechanical properties of thin films during a wide range of straining. The model is applied to the High Pressure Torsion (HPT) process of thin nickel disks that provides valuable information on the evolution of material parameters during deformation. The model considers a free surface theory for thin films and can explain the size effect phenomenon in agreement with previous reported trends in literature  

In this paper, an integration approach consists of implementation of true internal state variables constitutive model to finite element (FE) analysis is presented. From the approach, the deformation homogeneity during severe plastic deformation of sheet (SPD) is investigated. Since there is not any constitutive model for large deformation that based on appropriated physical assumptions, here a new constitutive model is proposed that is entirely based on metallurgical mechanisms. Also, in order to achieve accurate results with low computation time, a new approach for integration of the constitutive model to FE analysis is presented. By coupling the constitutive model and FE analysis, the... 

Commercial purity aluminum sheets are subjected to a severe plastic deformation technique called constrained groove pressing. In this study for the first time by using some technical optimizations, a strain magnitude of 6.9 is imposed to the sheets. The grain size evolution during severe plastic deformation is studied using Williamson-Hall analysis on X-ray diffraction pattern of the deformed samples. These results and transmission electron microscopy observations show that constrained groove pressing process can effectively refine the coarse-grained structure to an ultrafine grain range. The results of mechanical tests show that imposing strain in range of 0-5.75 causes to strengthening of... 

A hybrid model based on the flow function and dislocation cell structure model by considering the Taylor assumption is utilized to model the dislocation structure evolution, cell size and mechanical properties of OFHC in severe plastic deformation. Here, the ECAP is chosen as a process of severe plastic deformation. In this study, the model is modified by taking the value of cell size coefficient as a function of strain and considering two different values of dynamic recovery coefficients of cell walls and cell interiors. These modifications lead to achieve the more accurate modeling results. From the flow function the strain rate distribution are achieved and then using the model the... 

A general flow line model is developed to investigate the deformation behavior of Cu and Al through Bc route of Equal Channel Angular Pressing process at curved and sharp dies. Considering the Taylor theory, the obtained strain and strain rate from the flow line model and also using a modified version of ETMB model, the evolutions of nano-structure in the processed Cu and Al are predicted. Comparison between the modeling results and experimental data is carried out and a reasonable agreement is achieved. The results show that the deformation in the sharp die occurs in a narrow zone with higher strain rate than that in the curved die. Also, the cell size of the processed Cu is smaller than... 

A unified model composed of the flow function model, dislocation model and Taylor theory is used to investigate the evolution of dislocation density, cell size, and strength of tantalum during ECAP process. From the flow function model, strain and strain rate distributions are achieved and then using a modified version of three-dimensional ETMB model, the dislocation density, cell size, and strength are predicted. The predicted dislocation density, cell size, and strength are compared with the experimental data and a remarkable agreement is obtained. In addition, the effect of dynamic recovery on the strength of the processed tantalum is modeled and compared with other materials. © 2008... 

In this study, the flow softening of FCC materials through severe plastic deformation (SPD) is investigated using ETMB (Y. Estrin, L.S. Toth, A. Molinari, Y. Brechet) model. To do so, using the model, the equal channel angular pressing (ECAP) processes of two FCC materials, aluminum and copper, are investigated. The correlation between the recovery parameters of ETMB model (the dynamic recovery exponents and coefficients) and the intrinsic characteristics of the materials (the stacking fault energy (SFE) and melting point) is described and compared with the previous claims. © 2009 Elsevier B.V. All rights reserved  

In this paper, an incompressible smoothed particle hydrodynamics (SPH) method is presented to solve unsteady free-surface flows. Both Newtonian and viscoelastic fluids are considered. In the case of viscoelastic fluids, both the Maxwell and Oldroyd-B models are investigated. The proposed SPH method uses a Poisson pressure equation to satisfy the incompressibility constraints. The solution algorithm is an explicit predictor-corrector scheme and employs an adaptive smoothing length based on density variations. To alleviate the numerical difficulties encountered when fluid is highly stretched, an artificial stress term is incorporated into the momentum equation which reduces the risk of... 

The first step to locate Partial Discharge in power transformers is to find a model that can clearly explain the behavior of the winding in high-frequency. The detailed model is one of the models used for the study of PD. One of the fundamental problems of the described model is to find its parameters. And the accuracy in calculating these parameters has significant impact on reducing the simulation error and PD locating. The current paper seeks to calculate the parameters of the detailed model 20kv distribution transformer winding by using the finite element method (FEM). Comparing the results of this model with pulse waveforms obtained from the PD to the winding in the laboratory...