Sharif Digital Repository

Alavand Oil field is located 50 Km away from west of Siri Island and includes DPG and DPH platforms. The production from Alavand field started in 1998 and till now 11 wells have been totally drilled .Since a production peak in 2001, the oil production in Alvand field has decreased. Water cut is increasing and reservoir pressure is decreasing gradually. Considering poor reservoir characteristic of this reservoir, productivity indexes of wells are relatively low. In addition; natural depletion of reservoir caused the wells to be unable to flow naturally and either closed or produce periodically consequently. To increase production and extend the lifetime of Alvand field, it is decided to start... 

Matrix acidizing aims at bypassing near wellbore damages in typical carbonate reservoirs or enhancing permeability and hydraulic conductivity in naturally fracture ones. The simulation of acidizing process at pore scale and complex geometries by LBM will lead to gain more knowledge about molecular mechanisms that govern rock dissolution, diffusion and advection of reactive fluid and help the evaluation of acidizing efficiency.In this thesis, simulation of acidizing includes the following steps:
• Multicomponent fluid convection
• Fluid diffusion into the solid
• Fluid-rock reaction
• Boundary conditions including periodic, bounceback, non-equilibrium bounceback, Dirichlet,... 

One of the major issues raised in the numerical models is the effects of various input parameters on the model output. Identifying the most important parameters in the output is very important in petroleum engineering, especially in tuning equation of states and history matching. Screening the most important parameters from unimportant parameters is assessable by sensitivity analysis.In this study local and global sensitivity analysis methods are used to identify the most important parameters in tuning EOS for seven different fluid samples. Global sensitivity analysis methods are more successful in correct ranking of tuning parameters. Morris method as a global method can screen the... 

One of the most important issues in modeling and simulation of reservoirs is determination of different rock types or Rock Typing. In this study, after a brief review of some conventional methods for rock typing, their capabilities have been investigated. In this way, for the first time, pore network modeling is used as a tool for validating the rock typing methods. By using flow simulation in porous medium with pore network modeling approach, similar rock types data have been generated and these artificially data have been used for validating of rock typing methods. To form more realistic pore networks, both regular and irregular pore network have been modeled and analyzed. Pore size... 

Any factor that causes an additional pressure drop to the reservoir is called damage. Damages due to drilling, well completion and production can cause additional pressure drop to formation. In this study, damage caused by mechanical damage, well deviation from vertical (angled well), partially completed well and horizontal well and formation damage behavior during the occurrence of water and gas coning phenomenon have been investigated by simulation and the results have been verified with the analytical models available for calculating the formation skin factor. Also, by studying and examining the data and the results obtained from the simulation of the horizontal well skin factor in a data... 

The reduction of the effective permeability of the reservoir rock in the production area due to various factors is called formation damage. Formation damage is always one of the topics discussed in petroleum engineering. Among the primary and important cases that lead to damage to the formation are the filtration of drilling mud into the production area and the deposition of colloidal particles inside the porous rock during the drilling operation. The length of the productive zone in contact with the drilling fluid usually reaches several hundred feet in Iranian formations. In this study, the aim is to more accurately estimate the amount of permeability reduction caused by the penetration of... 

The main responsibility of a primary cement job is to provide hydraulic isolation between various zones. Cement-sheath evaluation is concerned with the question of whether zonal isolation exists. Cement Evaluation Logs are used to evaluate the quality of cement sheath behind the casing or liner after cement job. these logs are a part of well integrity logs. Cement Evaluation Log results are complex and can be misunderstood, and it can lead to bad decisions that could have severe consequences. Cement evaluation logs must therefore be interpreted by experienced professionals. To help these interpreters, we propose a system for automatically interpreting cement evaluation logs, which they can... 

Underbalanced drilling is a type of drilling operation in which the pressure of the drilling fluid is less than the pressure of the formation. This pressure difference has created advantages for this method. Less formation damage, reduction of pipe stuck, increasing rate of penetration and production during drilling are the advantages of this method compared to traditional methods. To reduce the pressure of the drilling fluid, very low density fluids should be used. One way to reduce density is to mix a compressible fluid such as gas into water. Due to the difference in density and surface tensile strength of water and gas, these two phases do not combine, so a stable combination of these... 

The concurrent flow of oil and water is a common occurrence in the field of multiphase flow in different fields including petroleum industry. In oil and gas, production engineers often face a situation in which more than one phase is flowing through the producers. In such conditions an accurate assessment of pressure loss inside the well plays a vital role in efficient and effective production planning. Changes in well orientation, wellbore diameter, reservoir and fluid properties as well as fluid flow rates are among parameters in which will affect the flow patterns that can occur inside a well during its life time. These flow patterns are created as a result of a competition between... 

Casing design is one of the most expensive parts in the drilling of oil wells, and any cost reduction with the basic design of these casing strings will significantly reduce the total cost of the operation. In recent years, occurring scenarios-based casing design has become popular; Because in many cases, it eliminates non-occurring scenarios such as gas kick and saves on drilling costs. In this study, we have tried to investigate all scenarios that may occur during the lifetime of the well, whether drilling or production, and for each well, based on its own field information, possible scenarios for each casing part are selected separately and the applying loads are calculated. For this... 

Wax deposition is one of the main problems in the oil industry. The formation of wax deposition causes problems such as reducing the effective tube radius, increasing pressure, reducing the flow capacity and etc. Even crude oil waxes can block the pipeline due to deposition of wax during crude oil production and transportation operations. If wax deposition is well predicted and effective parameters are well known and studied, they can be useful in reducing the deposition of wax, and consequently its problems and wax deposition costs will be significantly reduced. In this research, wax deposition has been investigated in Underbalanced drilling by OLGA software. In the first part, by... 

Transport of drilling cuttings at the bottom of the well has always been one of the common problems of oil and gas drilling, which causes stock pipe or reduce the penetration rate and other problem. For this reason, the design of drilling fluid is one of the important drilling problems to be considered in order to optimally transfer drilling cuttings to surface. So far, many papers have been devoted to optimizing the drilling fluid for the transport of cuttings, but these papers focus on the state of drilling fluid static and less to model the dynamics and to examine the interaction between the cuttings and drilling fluid. At this end this study will modeling the drilling fluid flow using... 

One of the three fundamental methods in reservoir evaluation is coring, other two methods are logging and well test. Coring is an operation during which, samples from formation rock are taken, and used for laboratory tests and examinations. Although coring presents exact information from reservoir rock, its small scale is the reason of some laboratory errors. This operation is fulfilled with special bits. Coring importance shines where it could give us an idea of reservoir conditions; however cannot be develop it, to all of the reservoir. Coring is used to identify rock properties like porosity, permeability, wettability and fluid properties like fluid density or fluid saturation. Rock... 

Because of the importance of simulations in the oil industry, there are different software applications designed for this purpose. The purpose of the simulation in the oil industry is to reduce operational errors during the operation and to achieve the most ideal mode of operation. However, in the simulation of multiphase fluid flow because of the special circumstance, simulation plays an important role in the oil industry. OLGA multiphase flow simulation software is a strong simulation software for water, oil, Gas wells, wellhead facilities, refineries and pipelines and it is capable of simulating pipelines under various dynamic conditions. Simulation of drilling hydraulic parameters is... 

Drilling operation is one of the most important parts of oil production procedure. Therefore, drilling optimization has an effective role in ultimate benefits and total cost reduction. Also formation damage can affect reservoir performance. In this study, a combination of optimization methods for each part of drilling operation has been used and fitness function of total cost is presented. This function includes number of bit runs, bit selection, controllable parameters and drilling mud properties. For prediction of formation damage radius and variable risk analysis, two new methods are proposed and have been used as fitness functions. Finally, by suggesting a multi objective optimization... 

During the drilling of oil and gas wells, the probability of a kick resulting in blow out is high. In the event of a kick, well should be controlled immediately and prevented blowing out. Common methods include: driller method, wait and weight method and concurrent method. In this project, simulation of well control process is done for common well control methods, for water based muds and oil based muds. Movement of different fluids, their combination and removal of fluid from the well are simulated and the results are listed. The flash calculations are done for oil based mud and dissolution of kick fluid in the oil based mud is considered. After simulating and calculating necessary... 

Nowadays, one of the major challenges in the oil and gas industry is sand production, which creates many problems and can complicate the oil and gas production process, so modeling sand production and using models to estimate the start of sand production and also the amount of sand produced can help a lot in the proper management of the reservoir.In this study, first, how to obtain the critical wellbore pressure using the Mohr-coulomb failure criteria and also the Mogi-coulomb failure criteria in different cases, it is explained, that knowing the critical wellbore pressure can be helpful in estimating the start of sand production. Then, how to build a one-dimensional geomechanical model of... 

In this study, for investigation of water salinity effect on asphaltene modeling, PC-SAFT equation of state has been used. All steps of modeling have been done by C sharp programming language software. Nghiem model has been used for modeling of asphalting pure solid. In this model, the heaviest component is split into two precipitating and nonprecipitation parts that their physical properties are the same in each part. Furthermore, to determine the exact mechanism of asphaltene precipitation, an oil model (Asphaltene+heptan+tuloene) in the presence of different water brine such as synthetic brine (with MgCl2, CaCl2, and Na2SO4 salts), seawater) ten and two times diluted), and formation water... 

Nowadays, one of the most challenges in drilling and production engineering, is the formation damage caused by fluid filtration while drilling and completion operations. This damage would cause serious problems in pay zone and besides influencing the well performance during its life time – due to permeability reduction in near wellbore area- and cause economic expenses such as workover and stimulation operation. Therefore, considering the aspects of formation damage minimization during drilling and completion operations, the fluid selection for these purposes would be crucial. It requires the knowledge of interactions between these fluids and the reservoir rock. In this thesis, using the... 

Aphron drilling fluids or CGA fluids are the wellknown updated drilling fluids in recent years.this kind of drilling fluids can control the mud loss into the formation and thus reduce formation damage and drilling costs. its structure consists of two phase fluid (gas and liquid) that the aphrons are the micro bubbles with 10 to 100 micrometer diameter that have strong stability in liquid phase compared to foamy drilling fluids. Generally aphron drilling fluids are made of base drilling fluid and surfactants, for more stability, mixed surfactant-polymer additive is so beneficial. in the last two decades, the Lattice-Boltazmann method is introduced for computational fluid dynamic area and...