Loading...
Search for: behzadi-saroukolaei--mohammad
0.172 seconds

    The Study of the Effects of Different Parameters on Solar Chimneys Used in Ventilation

    , M.Sc. Thesis Sharif University of Technology Behzadi Saroukolaei, Mohammad (Author) ; Kazemzadeh Hannani, Siamak (Supervisor)
    Abstract
    The purpose of present work is to study the effect of different parameters on the solar chimney used in ventilation. Experimental model and numerical model were used to achieve this goal. First, the model was numerically analyzed by Fluent software using Boussinesq approximation. The results of numerical modeling were validated by the empirical model. Finally, the numerical model can be used to investigate the effects of parameters which modeling is not possible by the empirical model for any reason. Experimental modeling was performed on a chimney with height and width of 180 and 62 cm, respectively. The thickness and angle of chimney in both experimental and numerical methods varied from 5... 

    Numerical Investigation of Laminar Premixed Flame Response to Acoustic Excitation

    , M.Sc. Thesis Sharif University of Technology Behzadi, Milad (Author) ; Farshchi, Mohammad (Supervisor)
    Abstract
    Flame Response to acoustic excitation which plays an important role in combustion chamber stability state may be found through numerical simulation. A finite volume code of higher order accuracy developed for compressible flows was adopted. Species equations along with a single-step irreversible reaction model were added to this non-reacting program. Changes were also made to the energy equation. Premixed methane/air flame in tubes was studied and the same problem was solved with FLUENT software. It was found that whether the Lewis number is considered constant or temperature dependent has a strong effect on flame structure and shape and that using mean values for gas properties yields out... 

    Experimental Investigation of Using Phase Change Material Effect on Heat Transfer in Pool Boiling Process

    , M.Sc. Thesis Sharif University of Technology Behzadi, Mohammad Matin (Author) ; Shafii, Mohammad Behshad (Supervisor)
    Abstract
    One of the different methods of heat transfer, is pool boiling process. In this method, the operating fluid starts to boil on a hot surface whose temperature is more than boiling point of the fluid. Based on difference between between surface temperature and fluid boiling point, amount of heat flux from hot surface to fluid and fluid behavior will be different. In recent years, many researchers have tried to improve the amount of heat transfer in the boiling process by using various methods such as nanoparticle addition or using magnetic field.Latent heat is thermal energy released or absorbed, by a body or a thermodynamic system, during a constant-temperature process, usually a first-order... 

    The Influence Of E-shopping on Shopping Trips Case Study of Students of Tehran

    , M.Sc. Thesis Sharif University of Technology Mehin Behzadi, Ajang (Author) ; Kermanshah, Mohammad (Supervisor)
    Abstract
    Online searching for product information or buying some certain goods online has become increasingly popular during the last few years. Despite this fact there is still little empirical evidence about the relationship between in-store shopping and e-shopping. The substitution effect between these two types of shopping can have significant outcomes in urban transportation. Hence Analyzing different aspects of this new phenomenon and using its potential substitution effect on in-store shopping to decrease the amount of mobility in transportation system can be an attractive subject for urban transportation planners. The main purpose of this study is to reveal the relationship between the... 

    Combination of Two-Stage Optimized Active Control of Edgewise vibrations of Wind Turbine Blades by using Robotic Arms

    , M.Sc. Thesis Sharif University of Technology Behzadi, Mohammad Amin (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    Renewable energies and their various types have been recognized as sustainable solutions to address the challenges arising from increasing energy consumption and environmental issues. The use of wind energy as one of the renewable energy sources has particular advantages, considering it as one of the most sustainable energy sources. One of the key factors in wind turbine development is the diversity and multiplicity in their structural designs. Therefore, the design of wind turbine structures with characteristics such as suitable strength, high energy efficiency, optimal cost, and high reliability is of great importance. By employing various sciences such as vibrations and optimization in... 

    Synthesis and Biocompatibility Evaluation of TiO2/Pyrolytic Carbon Core/Shell

    , M.Sc. Thesis Sharif University of Technology Behzadi, Shahed (Author) ; Simchi, Abdolreza (Supervisor) ; Imani, Mohammad (Supervisor)
    Abstract
    Carbon-based thin films possess low friction coefficient, low surface roughness, chemical inertness and outstanding biocompatibility. In the present work, TiO2 nanoparticles were covered by a thin film of pyrolytic carbon (PyC) to provide a core-shell morphology. The PyC film was deposited by dehydrogenation of methane in a fluidized bed chemical vapour deposition (FBCVD) reactor at 1100 °C. The prepared specimens were characterized by various analytical methods including XRD, SEM, TEM, AFM, TGA and contact angle measurement techniques. Biocompatibility profiles of the resulting materials were evaluated using MTT and cell cycle assay. The results showed that the thin carbon film strongly... 

    Pyrolytic carbon coating for cytocompatibility of titanium oxide nanoparticles: a promising candidate for medical applications [electronic resource]

    , Article Nanotechnology ; February 2012, Vol. 23, No. 4, PP. 045102 Behzadi, S. (Shahed) ; Imani, Mohammad ; Yousefi, Mohammad ; Galinetto, Pietro ; Simchi, Abdolreza ; Amiri, Houshang ; Stroeve, Pieter ; Mahmoudi, Morteza ; Sharif University of Technology
    Abstract
    Nanoparticles for biomedical use must be cytocompatible with the biological environment that they are exposed to. Current research has focused on the surface functionalization of nanoparticles by using proteins, polymers, thiols and other organic compounds. Here we show that inorganic nanoparticles such as titanium oxide can be coated by pyrolytic carbon (PyC) and that the coating has cytocompatible properties. Pyrolization and condensation of methane formed a thin layer of pyrolytic carbon on the titanium oxide core. The formation of the PyC shell retards coalescence and sintering of the ceramic phase. Our MTT assay shows that the PyC-coated particles are cytocompatible at employed doses  

    Modeling of Human Quadriceps Muscles and Design of a Magnetorheological Fluid-based Muscle Strengthening Device

    , M.Sc. Thesis Sharif University of Technology Seifi, Mohammad Mahdi (Author) ; Farahmand, Farzam (Supervisor) ; Behzadi Poor, Saeed (Supervisor)
    Abstract
    The Quadriceps Muscle as one of the major muscles of the human body plays a key role in knee function. Strengthening of this muscle is recommanded to prevent knee pain and even cure some diseases. Many believe that by strengthening the medial part with respect to the lateral part of the quadriceps muscles, patellofemoral pain syndrome can be prevented or treated. In this regard, a muscle strengthening system, based on magneticorheological brake is designed which provides isometric, isotonic and isokinetic exercise of knee joint and also enables the selective muscle strengthening. Beforehand a musculoskeletal model of lower extremity is developed in OpenSim software, capable to estimate force... 

    Critique of Kuhns Histirical Perspective from Gadamerian Perspective

    , M.Sc. Thesis Sharif University of Technology Behzadi Moghaddam, Mohammad Reza (Author) ; Moeinzadeh, Mahdi (Supervisor) ; Taghavi, Mostafa (Supervisor)
    Abstract
    Truth and Method is one of the two or three most important works of this century on the philosophy of humanistic studies. The book is powerful, exciting, but undeniably difficult. Published when Gadamer was sixty, it gathers the ripe fruit of a lifetime's reading, teaching, and thinking. Because it is immersed in German philosophy and scholarship, the book is even more challenging for an American reader. An emerging body of commentary in English as well as the many shorter essays Gadamer has, happily, lived to write and which are increasingly available in translation provide additional means of access to his thought. Truth and Method, however, remains his magnum opus, the comprehensive and... 

    Comparison of invasive and non-invasive cylindrical capacitive sensors for electrical measurements of different water solutions and mixtures

    , Article Sensors and Actuators, A: Physical ; Volume 167, Issue 2 , June , 2011 , Pages 359-366 ; 09244247 (ISSN) Behzadi, G ; Golnabi, H ; Sharif University of Technology
    2011
    Abstract
    In this study design and operation of invasive and non-invasive cylindrical capacitive sensor (CCS) designs for the electrical measurements of water, water solutions, and water mixtures are reported. Operation of the capacitance measurement module for such probes is based on the charge/discharge method. The measured capacitances and resistances for distilled water, mineral water, tap water and salt water samples are reported by using two sensor types and results are compared. The measured capacitance by invasive CCS for distilled water is about 2.28 μF and by non-invasive CCS is 31.40 pF, which shows a big difference for different probes. Such a difference is due to the electrical... 

    Investigation of conductivity effects on capacitance measurements of water liquids using a cylindrical capacitive sensor

    , Article Journal of Applied Sciences ; Volume 10, Issue 4 , 2010 , Pages 261-268 ; 18125654 (ISSN) Behzadi, G ; Golnabi, H ; Sharif University of Technology
    2010
    Abstract
    In this study by using a Cylindrical Capacitive Sensor (CCS), the Electrical Conductivity (EC), effects on the capacitance measurements of the water liquids was investigated. Theoretical values of the capacitance measurements of water liquids with the cylindrical length in the range 0.5-5 cm are calculated. Our obtained results indicate that measured capacitance value by CCS depends on the liquid capacitance and reactance capacitance. Liquid capacitance value of the distilled water for permittivity of 80 is about 33.5 pF and reactance capacitance value is about 0.290 μF, when the cylindrical length value is about 1.6 cm. The reactance capacitance for the mineral, tap and dilute salt water... 

    Environmentally responsive surface-modified silica nanoparticles for enhanced oil recovery

    , Article Journal of Nanoparticle Research ; Volume 18, Issue 9 , 2016 ; 13880764 (ISSN) Behzadi, A ; Mohammadi, A ; Sharif University of Technology
    Springer Netherlands  2016
    Abstract
    Environmentally responsive surface-modified nanoparticles are colloidal nanoparticles coated with, at least, two physicochemically distinct surface groups. Recent advances in the synthesis and production of nanoparticles have enabled the production of environmentally responsive surface-modified nanoparticles with both hydrophilic and hydrophobic surface groups. These nanoparticles act like colloidal surfactants. In this paper, environmentally responsive surface-modified silica nanoparticles are synthesized and used for enhancement of oil recovery. For this purpose, silica nanoparticles are coated with polyethylene glycol chains as hydrophilic agent and propyl chains as hydrophobic agent at... 

    Monitoring temperature variation of reactance capacitance of water using a cylindrical cell probe

    , Article Journal of Applied Sciences ; Volume 9, Issue 4 , 2009 , Pages 752-758 ; 18125654 (ISSN) Behzadi, G ; Golnabi, H ; Sharif University of Technology
    2009
    Abstract
    In this study by using a capacitive cell probe the temperature variation of the electrical properties of the water liquids is investigated. Variation of the reactance capacitance parameter of liquids with temperature in the range of 17-60°C is measured for the plain water and water mixtures. The temperature variations of the capacitance for the cool distilled and tap water samples are studied for the range of 17-29°C obtained. Present results indicate an averaged variation of 4.69 μF/°C for the distilled water and 3.24 μF/°C for tap water in warm up process to a near room temperature. The cooling behaviors for the warm mineral, tap and salt water liquids are also investigated in this study.... 

    Theoretical Study of the Effects of a Diffuse Layer on Nonlinear Interaction of a Surface Wave with Interfacial Waves

    , M.Sc. Thesis Sharif University of Technology Behzadi, Sima (Author) ; Jamali, Mirmosadegh (Supervisor)
    Abstract
    The theory of resonant wave interaction has found considerable applications in meteorology, oceanography and limnology. It is known that the mechanism serves as an effective means of energy transfer in the atmosphere, oceans and lakes. In this project, the three-dimensional resonant interaction of a surface wave with two pairs of interfacial waves in a stratified fluid is studied theoretically. Witham’s variational method is formulated in order to apply to weak resonant interaction among waves whose amplitudes and phase angles vary slowly with position and time. The method is applied to a surface-interfacial wave interaction in a horizontally infinite two layer fluid. Combination of two... 

    Application of Variational Method in Analysis of Flow in an Ideal Stratified Fluid System

    , Ph.D. Dissertation Sharif University of Technology Behzadi, Sima (Author) ; Jamali, Mirmosadegh (Supervisor)
    Abstract
    Using Variational Method, two important hydrodynamic phenomena, “internal gravity waves” and “gravity currents”, are modelled theoretically in this research. Variational method as a robust technique for modelling complicated problems related to fluid mechanics gives us the ability of finding closed-form formula for predicting the behavior of the flow in an ideal fluid system. In the first part of this research, focusing on the nonlinear resonant interaction between surface and internal waves, we model the evolution of interfacial waves on the interface of a two-layer fluid system. This phenomenon play an important role in the mixture of the fluid and cascade of energy in the environment.... 

    Design and operation optimization of an internal reforming solid oxide fuel cell integrated system based on multi objective approach

    , Article Applied Thermal Engineering ; Volume 114 , 2017 , Pages 561-572 ; 13594311 (ISSN) Behzadi Forough, A ; Roshandel, R ; Sharif University of Technology
    Elsevier Ltd  2017
    Abstract
    The interaction between design parameters and operation variables is a complex problem that affects system techno-economic performance. The aim of this paper is to optimize the design and operation of an SOFC/MGT integrated system. The problem consists of design and operation optimization of an integrated SOFC/MGT system. Decision variables including design parameters (number of SOFC cells) as well as the operation parameters (air pressure ratio, methane and air flow rates). The multi objective approach using genetic algorithm is applied considering two pairs of proposed objectives: (1) maximization of output power and minimization of the electricity cost and (2) maximization of system... 

    Lifetime optimization framework for a hybrid renewable energy system based on receding horizon optimization

    , Article Energy ; Volume 150 , 1 May , 2018 , Pages 617-630 ; 03605442 (ISSN) Behzadi Forough, A ; Roshandel, R ; Sharif University of Technology
    Elsevier Ltd  2018
    Abstract
    In this work, a novel convex sequence framework for real-time receding horizon operation optimization of a hybrid renewable energy system integrated with optimal sizing is presented to increase the penetration rate of renewable energy in supplying the demand. The proposed framework optimizes the entire lifetime cost of a system consisting of two main steps which are 1) design & installation and 2) operation as two sequence modules. This framework is applied to a hybrid renewable energy system which includes PV, wind turbine, batteries and a diesel generator. In the operation optimization, receding horizon strategy is used to optimize the operation schedule. Mixed integer convex programming... 

    Multi objective receding horizon optimization for optimal scheduling of hybrid renewable energy system

    , Article Energy and Buildings ; Volume 150 , 2017 , Pages 583-597 ; 03787788 (ISSN) Behzadi Forough, A ; Roshandel, R ; Sharif University of Technology
    2017
    Abstract
    In this paper, a methodology for energy management system (EMS) based on the multi-objective receding horizon optimization (MO-RHO) is presented to find the optimal scheduling of hybrid renewable energy system (HRES). The proposed HRES which is experimentally installed in educational building comprising the PV panels, wind turbine, battery bank and diesel generator as the backup system. The data acquisition system provides input profiles for receding horizon optimizer. A mixed-integer convex programing technique is used to achieve the optimal operation regarding to two conflicting operation objectives including diesel fuel cost and battery wear cost. The Pareto frontiers are presented to... 

    Multi objective optimization of solid oxide fuel cell stacks considering parameter effects: Fuel utilization and hydrogen cost

    , Article Journal of Renewable and Sustainable Energy ; Volume 5, Issue 5 , 2013 ; 19417012 (ISSN) Behzadi Forough, A ; Roshandel, R ; Sharif University of Technology
    2013
    Abstract
    In the context of stationary power generation, fuel cell based systems are being predicted as a valuable option to tabernacle the thermodynamic cycle based power plants. In this paper, multi objective optimization approach is used to optimize the planer solid oxide fuel cell (SOFC) stacks performance using genetic algorithm technique. Multi objective optimization generates the most attractive operating conditions of a SOFC system. This allows performing the optimization of the system regarding to two different objectives. Two pairs of different objectives are considered in this paper as distinguished strategies. In the first strategy, minimization of the breakeven per-unit energy cost... 

    Janus Silica Nanoparticles and Their Application for Enhanced Oil Recovery

    , M.Sc. Thesis Sharif University of Technology Behzadi, Abed (Author) ; Mohammadi, Ali Asghar (Supervisor)
    Abstract
    Nanoparticles can be applied as chemical agent in enhnaced oil recovery like surfactants and polymers. One of nanoparticles usefull capabilities is modification of their surface. This research investigates this capabilty of nanoparticles in enhanced oil recovery. Surface modification of nanoparticles with both agents can bring new abilities to these materials. Here surface of silica nanoparticles is modified by hydrophilic agent comprising PEG groups, hydrophobic agent comprising propyl group and both agents. FT-IR tests showed that grafting of modifiyng agents on surface of nanoparticles is well done. To investigate effect of nanoparticles surface modification on nanoparticles capability in...