Loading...
Search for:
ejehi--f
0.094 seconds
Total 3646 records
Self-powered ultraviolet/visible photodetector based on graphene-oxide via triboelectric nanogenerators performing by finger tapping
, Article Nanotechnology ; Volume 33, Issue 47 , 2022 ; 09574484 (ISSN) ; Shooshtari, L ; Mohammadpour, R ; Asadian, E ; Sasanpour, P ; Sharif University of Technology
Institute of Physics
2022
Abstract
Self-sufficient power sources provide a promising application of abundant electronic devices utilized in detection of ambient properties. Recently, triboelectric nanogenerators (TENGs) have been widely investigated to broaden the self-powered systems by converting the ambient mechanical agitations into electrical voltage and current. Graphene oxide (GO), not only for sensing applications but also as a brilliant energy-related nanomaterial, provides a wide range of controllable bandgap energies, as well as facile synthesis route. In this study, GO-based self-powered photodetectors have been fabricated by conflating the photosensitivity and triboelectric characteristics of freestanding GO...
Enhancement of self-powered humidity sensing of graphene oxide–based triboelectric nanogenerators by addition of graphene oxide nanoribbons
, Article Microchimica Acta ; Volume 188, Issue 8 , 2021 ; 00263672 (ISSN) ; Mohammadpour, R ; Asadian, E ; Fardindoost, S ; Sasanpour, P ; Sharif University of Technology
Springer
2021
Abstract
A triboelectric nanogenerator (TENG) electrode sensitive to the adsorption of water molecules has been introduced to create a self-powered humidity sensor. Graphene oxide (GO) nanosheets and graphene oxide nanoribbon (GONR) possessing oxygenated functional groups, as well as high dielectric constants, have been proposed as appropriate candidates for this purpose. GO papers have been fabricated in three forms, i.e. pure GO paper, uniform composites of GONR and GO, and double-layer structures of GONR on top of GO. Results showed that all of the prepared paper-based TENGs revealed excellent performances by maximum output voltage above 300 V. As active humidity sensors, the maximum voltage...
Graphene oxide papers in nanogenerators for self-powered humidity sensing by finger tapping
, Article Scientific Reports ; Volume 10, Issue 1 , 2020 ; Mohammadpour, R ; Asadian, E ; Sasanpour, P ; Fardindoost, S ; Akhavan, O ; Sharif University of Technology
Nature Research
2020
Abstract
Triboelectric nanogenerators (TENGs) offer an emerging market of self-sufficient power sources, converting the mechanical energy of the environment to electricity. Recently reported high power densities for the TENGs provide new applications opportunities, such as self-powered sensors. Here in this research, a flexible graphene oxide (GO) paper was fabricated through a straightforward method and utilized as the electrode of TENGs. Outstanding power density as high as 1.3 W.m−2, an open-circuit voltage up to 870 V, and a current density of 1.4 µA.cm−2 has been extracted in vertical contact-separation mode. The all-flexible TENG has been employed as a self-powered humidity sensor to...
Fabrication of Triboelectric Nanogenerators based on Two-Dimensional Materials
, M.Sc. Thesis Sharif University of Technology ; Mohammadpour, Raheleh (Supervisor) ; Akhavan, Omid (Supervisor) ; Sasanpour, Pezhman (Supervisor) ; Shokrgozar, Mohammad Ali (Co-Supervisor)
Abstract
Triboelectric nanogenerator (TENG) works based on the accumulation of electrostatic charges produced on the surface of two dissimilar materials while they are brought into physical contact. When the surfaces are separated by a mechanical force, the induced triboelectric charges generate a potential drop, which can lead to generate an electrical current. Since their invention in 2012, TENGs have shown a rapid development in diversity of structure, amount of output power and range of applications, such as self-powered sensors, touch pads, and smart skin. Various kinds of mechanical force can be used for producing electrical energy: human motion, walking, vibration, rotating tire, wind, flowing...
Effect of heating profile on desorption curve in temperature programmed desorption analysis: Case study of acid sites distribution of SAPO-34
, Article Journal of Porous Materials ; Volume 16, Issue 5 , 2009 , Pages 599-603 ; 13802224 (ISSN) ; Farhadi, F ; Khorasheh, F ; Yan, Z. F ; Sharif University of Technology
2009
Abstract
Comparison of the traditional linear heating method of TPD with an original stepwise heating scheme was reported for the first time. Stepwise heating TPD was carried out by keeping the temperature constant as soon as ammonia desorption signal rises until the signal returns to the baseline. More ammonia desorption peaks on a SAPO-34 catalyst were identified using TPD with stepwise heating. The effect of temperature ramp on desorption peak broadening in TPD curve was also addressed. The more distinct ammonia desorption peaks in stepwise TPD indicates that ammonia adsorbs in about five or six different ways on SAPO-34, and attribution of different adsorptions may be explained considering some...
Theoretical and experimental study of cascade solar stills
, Article Solar Energy ; Volume 90 , April , 2013 , Pages 205-211 ; 0038092X (ISSN) ; Sharak, A. Z ; Moghadam, H ; Tabrizi, F. F ; Sharif University of Technology
2013
Abstract
Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The...
Real-time impulse noise suppression from images using an efficient weighted-average filtering
, Article IEEE Signal Processing Letters ; Volume 22, Issue 8 , 2015 , Pages 1050-1054 ; 10709908 (ISSN) ; Hessar, F ; Marvasti, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
In this letter, we propose a method for real-time high density impulse noise suppression from images. In our method, we first apply an impulse detector to identify the corrupted pixels and then employ an innovative weighted-average filter to restore them. The filter takes the nearest neighboring interpolated image as the initial image and computes the weights according to the relative positions of the corrupted and uncorrupted pixels. Experimental results show that the proposed method outperforms the best existing methods in both PSNR measure and visual quality and is quite suitable for real-time applications
Evaluation and enhancing of operational performance and training objective in accordance with Line Operations Safety Audit (LOSA)
, Article International Air Safety Seminar Proceedings, 1 November 2011 through 3 November 2011 ; November , 2011 , Pages 78-99 ; 02705176 (ISSN) ; 9781618393975 (ISBN) ; Goodarzi, F ; Sharafbafi, F ; Sharif University of Technology
2011
An improved methodology for design of custom-made hip prostheses to be fabricated using additive manufacturing technologies
, Article Rapid Prototyping Journal ; Volume 18, Issue 5 , 2012 , Pages 389-400 ; 13552546 (ISSN) ; Abbaszadeh, F ; Farahmand, F ; Sharif University of Technology
Emerald
2012
Abstract
Purpose - The purpose of this paper is to present an improved methodology for design of custom-made hip prostheses, through integration of advanced image processing, computer aided design (CAD) and additive manufacturing (AM) technologies. Design/methodology/approach - The proposed methodology for design of custom-made hip prostheses is based on an independent design criterion for each of the intra-medullary and extra-medullary portions of the prosthesis. The intra-medullar part of the prosthesis is designed using a more accurate and detailed description of the 3D geometry of the femoral intra-medullary cavity, including the septum calcar ridge, so that an improved fill and fit performance...
Kinetic modeling of pyrolysis of scrap tires
, Article Journal of Analytical and Applied Pyrolysis ; Volume 84, Issue 2 , 2009 , Pages 157-164 ; 01652370 (ISSN) ; Farhadi, F ; Khorasheh, F ; Sharif University of Technology
2009
Abstract
The disposal of used tires is a major environmental problem. With increasing interest on recovery of wastes, pyrolysis is considered as an alternative process for recovering some of the value in scrap tires. An accurate kinetic model is required to predict product yields during thermal or catalytic pyrolysis of scrap tires. Pyrolysis products contain a variety of hydrocarbons over a wide boiling range. A common approach for kinetic modeling of such complex systems is lumping where each lump is defined by a boiling point range. Available experimental data for thermal and catalytic pyrolysis of scrap tires from the literature were used to evaluate two types of lumping models; discrete and...
Application of a continuous kinetic model for the hydrocracking of vacuum gas oil
, Article Petroleum Science and Technology ; Vol. 32, Issue. 18 , 2014 , Pages 2245-2252 ; ISSN: 10916466 ; Khorasheh, F ; Farhadi, F ; Sharif University of Technology
2014
Abstract
Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and...
Information and the Brukner-Zeilinger interpretation of quantum mechanics: A critical investigation
, Article Foundations of Physics Letters ; Volume 19, Issue 1 , 2006 , Pages 1-20 ; 08949875 (ISSN) ; Safinejad, F ; Naqsh, F ; Sharif University of Technology
2006
Abstract
In Brukner and Zeilinger's interpretation of quantum mechanics, information is introduced as the most fundamental notion and the finiteness of information is considered as an essential feature of quantum systems. They also define a new measure of information which is inherently different from the Shannon information and try to show that the latter is not useful in defining the information content in a quantum object. Here, we show that there are serious problems in their approach which make their efforts unsatisfactory. The finiteness of information does not explain how objective results appear in experiments and what an instantaneous change in the so-called information vector (or catalog of...
Analytical modeling of variable-reluctance tubular resolver based on magnetic equivalent circuit and conformal mapping
, Article IEEE Transactions on Instrumentation and Measurement ; Volume 70 , 2021 ; 00189456 (ISSN) ; Zare, F ; Tootoonchian, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2021
Abstract
Compared with flat linear structures, tubular linear machines do not face edge effects, making their performance better than their flat counterparts. In this article, a novel linear variable-reluctance resolver with tubular configuration is proposed. To optimize the design of an electromagnetic structure, modeling methods are used. Thus, in this article, an analytical model for the proposed resolver is presented. This model is based on the magnetic equivalent circuit (MEC) method and is considerably less time-consuming than finite element analysis (FEA), yet provides accurate results. A conformal mapping is employed to compute the permeance of the air-gap. The proposed model is then utilized...
Determine oil content in petroleum waxes
, Article Hydrocarbon Processing ; Volume 85, Issue 6 , 2006 , Pages 95-97 ; 00188190 (ISSN) ; Yazdani, F ; Farhadi, F ; Sharif University of Technology
2006
Key parameters in hydrothermal synthesis and characterization of low silicon content SAPO-34 molecular sieve
, Article Microporous and Mesoporous Materials ; Volume 126, Issue 1-2 , 2009 , Pages 1-7 ; 13871811 (ISSN) ; Farhadi, F ; Khorasheh, F ; Sahebdelfar, S ; Asadi, M ; Yan, Z. F ; Sharif University of Technology
2009
Abstract
Low silicon content SAPO-34 was successfully synthesized using the conventional hydrothermal crystallization in the static condition. Effects of different synthesis conditions including crystallization temperature and the silicon source were investigated through X-ray diffraction patterns. It was concluded that the silicon source had a significant effect on silicon incorporation into the alumino-phosphate building blocks in the course of crystallization. Using precipitated silica instead of silica sol resulted in the formation of impurities of alumino-phosphates phases whose crystalline structures collapse at the high temperature of calcination. For the low silicon SAPO-34 synthesis, the...
Precision of direction of arrival (DOA) estimation using novel three dimensional array geometries
, Article AEU - International Journal of Electronics and Communications ; Volume 75 , 2017 , Pages 35-45 ; 14348411 (ISSN) ; Farzaneh, F
Elsevier GmbH
2017
Abstract
Numerous methods for direction of arrival (DOA) estimation, used in smart antennas have been already reported in previous studies. The precision of DOA estimation depends on the choice of the algorithm and the geometrical configuration of the antenna array. In this work, the performance of new geometrical configurations, i.e. 2D with equal area and 3D with equal volume including circular, square, triangular, hexagonal and star geometries, with equal number of antenna elements, are examined and compared to each other to find the most proper geometry. Monte-Carlo simulations are performed to evaluate the DOA precision of the proposed arrays using the MUSIC algorithm. It is shown that in three...
On the Finiteness of Noetherian Rings with Finitely Many Regular Elements
, Article Communications in Algebra ; Vol. 42, issue. 7 , 2014 , pp. 2869-2870 ; ISSN: 00927872 ; Heydari, F
2014
Abstract
Let R be a left Noetherian ring and ZD(R) be the set of all zero-divisors of R. In this paper, it is shown that if RZD(R) is finite, then R is finite
Improving tradeoff among downlink rates of service providers in a VWN by using noma
, Article IEEE Communications Letters ; Volume 23, Issue 1 , 2019 , Pages 156-159 ; 10897798 (ISSN) ; Mokhtari, F ; Ashtiani, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
In this letter, we improve the tradeoff among the downlink (DL) rates of service providers (SPs), provided by a mobile virtual network operator (MVNO) using non-orthogonal multiple access (NOMA) technique. In this respect, NOMA provides a suitable opportunity for the MVNO to share resources among SPs more efficiently. Regarding interaction among the DL rates provided for SPs we formulate our resource allocation problem as a multiobjective optimization problem (MOOP) while taking into account user fairness. By using the weighted Tchebycheff technique, we are able to solve the formulated MOOP by considering different tradeoffs among DL rates of different SPs. Our numerical results show that by...
Improving tradeoff among downlink rates of service providers in a vwn by using noma
, Article IEEE Communications Letters ; Volume 23, Issue 1 , 2019 , Pages 156-159 ; 10897798 (ISSN) ; Mokhtari, F ; Ashtiani, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
In this letter, we improve the tradeoff among the downlink (DL) rates of service providers (SPs), provided by a mobile virtual network operator (MVNO) using non-orthogonal multiple access (NOMA) technique. In this respect, NOMA provides a suitable opportunity for the MVNO to share resources among SPs more efficiently. Regarding interaction among the DL rates provided for SPs we formulate our resource allocation problem as a multiobjective optimization problem (MOOP) while taking into account user fairness. By using the weighted Tchebycheff technique, we are able to solve the formulated MOOP by considering different tradeoffs among DL rates of different SPs. Our numerical results show that by...
Multi-GNSS constellation fusion based on statistical features of positioning error
, Article 26th Iranian Conference on Electrical Engineering, ICEE 2018, 8 May 2018 through 10 May 2018 ; 2018 , Pages 725-730 ; 9781538649169 (ISBN) ; Behnia, F ; Marvasti, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2018
Abstract
With the advent of new positioning services, one can reach more satellites these days to find his position. Using a combination of satellites which belong to different constellations needs some considerations like addressing biases between their time references. Each constellation has progressed to the point that they have enough satellites to provide accurate position separately. According to this fact, we propose to find the position in each constellation and fusion their results in a way that final position has the minimum possible variance instead of combining the constellations in a satellite level and dealing with inter system biases. Experimental studies are conducted based on IGS...