Sharif Digital Repository

Effects of both electron beam irradiation on the properties of polypropylene (PP) films and the irradiation on the different layers of a multilayer PP film are studied. A Fourier transform infrared spectroscope was used to investigate the chemical structure of the films. The results showed that the chemical properties of the first layer were improved, that is, more functional groups responsible for dye ability and hydrophilicity of the film were produced on its surface, while noticeable improvement was not detected on the surface of other layers. This was also confirmed by testing the dye ability of the layers. However, the results obtained by atomic force microscopy showed that the electron... 

Langmuir probes (LP) are the most common diagnostics for the local measurement of very important plasma parameters such as plasma density, electron temperature, plasma potential and the electron energy distribution function (EEDF). In this paper the applicability of the first derivative Langmuir probe method in processing the electron part of the current-voltage (I-V) characteristics in IR-T1 Tokamak is reported. The EEDF at different radial positions in the edge region and Scrape off Layer (SOL) are derived and the values of the plasma potential, electron temperature and electron density are estimated. Results comparison between the first derivative method and Stangeby method shows a... 

Low temperature plasma (LTP) is nowadays an intensively investigated superficial treatment of wool. In this work we have investigated the effect of LTP on wool fabric under different conditions. The effect of the position of samples inside the reactor and the kind of gases used as discharge medium has been also investigated. The results show that not only the topography of the surface is modified but also the chemical composition of the surface. It is shown that the hydrophilicity of the samples and also their shrink resistance and anti-felting behavior have improved significantly under LTP treatment. The results show that the shrinkage of 30.1% for untreated samples has reduced to about... 

Polypropylene (PP) has a very low value of the surface free energy (approximately 20-25 mJ m-2). And thus, has very weak hydrophilic properties and doesn't have any affinity to any dyestuffs, such as cationic or anionic dyes. In this study, we covered some parts of PP fabrics by mask, and then irradiated them by electrons with different energies. After electron irradiation, the samples were dyed by cationic dyestuff. The result showed that, electron irradiated parts could be dyed easily and the fabric could be printed and decorated simply. The treated surfaces were investigated by scanning electron microscope (SEM), reflective spectrophotometery, and Fourier transform infrared spectroscopy... 

The purposes of this paper are determination of the current density and safety factor profiles, J(r) and q(r), in IR-T1 tokamak. For these purposes, a diamagnetic loop with its compensation coil, and also an array of magnetic probes were designed, constructed, and installed on outer surface of the IR-T1 tokamak chamber, and then the poloidal beta and poloidal and radial magnetic fields measured. Moreover, a few approximate values of the internal inductance for the different possible profiles of the plasma current density are also calculated. From the results, current density and q-profiles obtained  

In this work, the silver particle absorption and antibacterial activity of cotton fabric when modified by low temperature plasma were investigated. The modification consisted of plasma pre-functionalization followed by one-step wet treatment with silver nitrate solution. Oxygen and nitrogen were used as the working gases in the system, and the results were compared. The results showed that nitrogen plasma-treated samples can absorb more silver particles than oxygen-treated samples, and thus the antibacterial activity of the samples in this case, which was analyzed by the counting bacteria test, was increased considerably  

In this study, graphene sheets and carbon nanotubes (CNTs) were selectively grown on Fe foil at a relatively low growth temperature and varying cooling rates using a hot filament chemical vapor deposition (HFCVD) apparatus with C2H2 as the precursor. The results of the scanning electron microscopy and Raman spectroscopy revealed that the increase of the cooling rate from 7 to 10 or 20 °C/min provoked a structure transition from CNT to graphene. The optimum crystal quality of the graphene sheets (Iq/Id ∼1.1) was achieved at the cooling rate of 20 °C/min. According to the AFM analysis, the thickness of the stacked graphene sheets was found to be ∼2.9-3.8 nm containing ∼8-11 monolayers. The XRD... 

The first results of the movable electrode biasing experiments performed on the IR-T1 tokamak are presented. For this purpose, a movable electrode biasing system was designed, constructed, and installed on the IR-T1 tokamak, and then the positive voltage applied to an electrode inserted inside the tokamak limiter and the plasma current, poloidal and radial components of the magnetic fields, loop voltage, and diamagnetic flux in the absence and presence of the biased electrode were measured. Results compared and discussed  

Denim jeans have consistently been fashionable around the world. This fabric inspired strong opinions from historians, teenagers, and movie stars, and has acquired different styles throughout the years. Most jeans today are stonewashed; this technique first become popular in 1970. Now, in addition to pumice stones, enzymes are used on the cotton fabrics to create the stonewashed look. Nowadays, plasma treatment is a cost-effective and environment-friendly process which is able to modify the properties of the fabric surface in order to achieve this effect. Plasma surface treatment changes the properties of the fabric up to a limited depth (several molecular layers), leaving the bulk... 

In this paper, the effect of plasma sputtering treatment on the natural dyeing properties of wool and the possibility of substituting it for mordant treatment have been studied. We used madder and weld as natural dyes and copper sulfate (CuSO4) as a metal mordant. We also used, copper as the electrode material, in a DC magnetron plasma sputtering device. The color strength of samples was analyzed using a Reflective Spectrophotometer and washing and light fastnesses were investigated according to I.S.O. standard recommendations. The results show that, the color strength and fastness of dyed wool samples have been improved after plasma treatment. The antibacterial counting test was also used... 

In this study, we have used a low temperature plasma, produced by a DC magnetron sputtering device, for decolorizing of denim fabrics, and the effect of using different gases such as Argon and Oxygen as the discharge medium have been investigated. The results obtained under equal periods of time have been compared and the effect of washing on the treated denims has been reported. © 2006 Elsevier B.V. All rights reserved  

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite...