Loading...
Search for:
keikha--ali
0.129 seconds
Total 2313 records
Seismic performance evaluation of a novel bolted flush end-plate beam splice connection
, Article Proceedings of the Institution of Civil Engineers: Structures and Buildings ; Volume 173, Issue 2 , 2020 , Pages 109-127 ; Mofid, M ; Sharif University of Technology
ICE Publishing
2020
Abstract
This paper describes a three-dimensional (3D) finite-element (FE) model developed to assess the seismic behaviour of a novel prefabricated beam-to-beam connection termed a double-bolted flush end-plate beam (DBFEB) splice connection under cyclic loading. The seismic response was analysed and evaluated in terms of the hysteretic behaviour, rigidity, resistance degradation, ductility, energy dissipation capacity and equivalent damping coefficient. It is shown that the required performance can be achieved by controlling the end-plate thickness as well as the bolt grade and diameter; these parameters were therefore chosen as the key geometric variables investigated here for parametric study....
On the assessment of a new steel bolted flush end-plate beam splice connection
, Article Scientia Iranica ; Volume 24, Issue 4 , 2017 , Pages 1735-1750 ; 10263098 (ISSN) ; Mofid, M ; Sharif University of Technology
2017
Abstract
This paper describes the development of a numerical model with the ability to simulate and analyze the mechanical behavior of different types of Double Bolted Flush End-plate Beam (DBFEB) splice connections, which thus far has not been reported. Moreover, Bolted Flush End-plate Beam (BFEB) splice connections have been investigated for calibration of the results using Finite Element Modeling (FEM). The initial stiffness, rotation capacity, strength ratio, ductility, failure mode, and the performance of these two types of connections have been investigated and compared with each other with respect to FEMA 356. Also, classification of these two types of connections is performed by Eurocode 3...
Scrutiny of a Semi-rigid End-plate Splice Connection under Monotonic and Cyclic Loading
, M.Sc. Thesis Sharif University of Technology ; Mofid, Masood (Supervisor)
Abstract
Existing design methods for steel frames has been improved over the last three decades in order to incorporate the behavior of semi-rigid steel connections in furtherance of frame design and since the analysis and design of structures is often done based on the assumption of completely rigid or pinned behavior,therefore, the actual behavior of connections and their modeling can help to understand the actual behavior of structures.Knowledge of the initial rotational stiffness of the connection is important for elastic analysis of structures. Investigations show that structures with semi-rigid connections have many features which are the causes to prefer these kinds of connections to the...
Cement Quality Investigation and Determination Using Automatic Interpretation of Cement Quality Logs
, M.Sc. Thesis Sharif University of Technology ; Jamshidi, Saeed (Supervisor)
Abstract
The main responsibility of a primary cement job is to provide hydraulic isolation between various zones. Cement-sheath evaluation is concerned with the question of whether zonal isolation exists. Cement Evaluation Logs are used to evaluate the quality of cement sheath behind the casing or liner after cement job. these logs are a part of well integrity logs. Cement Evaluation Log results are complex and can be misunderstood, and it can lead to bad decisions that could have severe consequences. Cement evaluation logs must therefore be interpreted by experienced professionals. To help these interpreters, we propose a system for automatically interpreting cement evaluation logs, which they can...
Experimental Study on Submerged Propeller Noise
, M.Sc. Thesis Sharif University of Technology ; Seif, Mohammad Saeed (Supervisor) ; Mehdigholi, Hamid (Supervisor)
Abstract
In this thesis, we intended to examine the noise of typical Marine Propeller. Regarding the noise source, which are due to the energy transfer to the fluid and variation of fluid force, propeller noise has been investigated in two cases. In the first case, in constant depth, the distance of hydrophone with the propeller varies. In the second case, the distance remains constant and the depth of both propeller and hydrophone has been changed, in four positions. Due to the limitation of the test tank, a pool of (5m*5m*5m), the experiments has been carried out according to the Naval Underwater Systems Center. In the second part of this research, the numerical modeling of the propeller acoustic...
Technical English for mechanical engineers
, Book ; Meghdari,Ali
Sharif University Press
2014
Abstract
Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...
Feedback control of the neuro-musculoskeletal system in a forward dynamics simulation of stair locomotion [electronic resource]
, Article Proc. of IMechE Part H: Journal of Engineering in Medicine ; 2009, Vol. 223, No. 6, pp. 663-675 Journal of NeuroEngineering and Rehabilitation ; Volume 11, Issue 1, 30 April 2014, Article number 78 ; Meghdari, Ali ; Vossough, Gholam Reza ; Sharif University of Technology
Abstract
The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of...
Design and Construction of a Soft Actuated Exoskeleton for Hand Rehabilitation of Stroke Patients
, M.Sc. Thesis Sharif University of Technology ; Ghafari, Ali (Supervisor) ; Meghdari, Ali (Supervisor)
Abstract
The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to...
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
Earthquake Branch
, M.Sc. Thesis Sharif University of Technology ; Bakhshi, Ali (Supervisor)
Abstract
In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...
Comparison between Performance of Stone Columns and RAPs from the Bearing Capacity and Settlement Reduction Viewpoints
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor)
Abstract
Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of...
Improvement of Stability of Haptic Force Interaction with Virtual Environments Using a Haptic Interface with a Separate Tracker
, M.Sc. Thesis Sharif University of Technology ; Meghdari, Ali (Supervisor) ; Nahvi, Ali (Supervisor)
Abstract
In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new...
Characterzing Variation of Small Strain Shear Modulus of Unsaturated Sand During Hydraulic Hysteresis with Bender Elements
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor) ; Khosravi, Ali (Supervisor)
Abstract
Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during...
Simulation of the Biomolecule Imaging and Manipulation Via AFM by Molecular Dynamics Method
, M.Sc. Thesis Sharif University of Technology ; Meghdari, Ali (Supervisor) ; Moosavi, Ali (Supervisor)
Abstract
In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact...
Sequential Competitive Facility Location In Continuous Geometric Space
, M.Sc. Thesis Sharif University of Technology ; Abam, Mohammad Ali (Supervisor)
Abstract
Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...
Distributed Verifiable Computing: Algorithms and Analysis
, M.Sc. Thesis Sharif University of Technology ; Maddah Ali, Mohammad Ali (Supervisor)
Abstract
Zero knowledge proofs allow a person (prover) to convince another person (verifier) that he has performed a specific computation on a secret data correctly, and has obtained a true answer, without having to disclose the secret data. QAP (Quadratic Arithmetic Program) based zkSNARKs (zero knowledge Succinct Non-interactive Argument of Knowledge) are a type of zero knowledge proof. They have several properties that make them attractive in practice, e.g. verifier's work is very easy. So they are used in many areas such as Blockchain and cloud computing. But yet prover's work in QAP based zkSNARKs is heavy, therefore, it may not be possible for a prover with limited processing resource to run...
Performance of Partially Filled Mini-Channels with Porous Media
, M.Sc. Thesis Sharif University of Technology ; Nouri, Ali (Supervisor) ; Moosavi, Ali (Co-Advisor)
Abstract
Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the...
Selective preparation of fluorescent 1,8-naphthalimides using acidic alumina under microwave irradiation [electronic resource]
, Article Journal of Chemical Research ; 01/2001; 2001(11):485-487 ; Bagheri Marandi, Gholam
Abstract
7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation
Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions [electronic resource]
, Article Journal of Chemical Research ; Volume 2002, Number 8, 1 August 2002, pp. 378-380(3) ; Bagheri Marandi, Gholam
Abstract
Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions
Cracked Rotors Modeling for Vibration Analysis and Control
, Ph.D. Dissertation Sharif University of Technology ; Behzad , Mehdi (Supervisor) ; Meghdari, Ali (Supervisor)
Abstract
The main aim of this thesis is to develop a mathematical model for vibration analysis of cracked rotors. This model should be a simple and precise model for prediction of the cracked rotor vibration behavior and suitable for vibration control. In order to create such model, the pure bending of a cracked beam is analyzed at first. This analysis is performed for two different orientations of the crack with respect to the beam and the bending vector. In this section a continuous bending model with continuous model for crack is developed which can predict the full deformation of the cracked beam in bending and can estimate the stress distribution in the beam with good approximation. Comparison...