Sharif Digital Repository

In this project Iran and Iraq energy relation is investigate. Considering the Importance and the capacity of Iran and Iraq in world and Middle East energy and the geopolitics of these two countries, a good economic relationship between them, especially in energy domain, can highly improve their sustainable relations. In this research the Agent Based Modeling is used for studying Iran and Iraq relationship. In Agent Based Modeling the overall system behavior is made up of individual agents’ behavior. In this modeling, the agents decide based on their own behavioral rules and also their status. In this study Iran and Iraq are modelled as two agents. The state of the two countries in energy,... 

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the... 

FGM sheets with component or grain size gradient in their thickness direction provide mechanical and physical gradient properties through ND direction. FGMs are fabricated by various methods including centrifugal casting, powder metallurgy, PVD and CVD,all of which suffer from some shortcomings such as porosity of the products, low rate and high cost of production and restrictions on mass production. In this study, 2 and 4 layered Al matrix FGM sheets containing SiC and Al2O3 powders were fabricated by laminating method of Accumulative Roll Bonding(ARB). Two approaches of stacking were chosen as accumulative coupled roll bonding (ACRB) and (ASRB) for initial roll bonding and subsequent... 

Metal matrix composites (MMC) and metal foams (MF) have been the topic of numerous researches during the last decades. The appropriate mechanical and physical properties of these materials make them useful in various industries. In this research, a unique approach is introduced for producing MMCs and MFs in which accumulative roll bonding (ARB) is employed in order to achieve a homogeneous distribution of ceramic particles in the metal matrix. Also, foamed structures can be made by subjecting Al/TiH2 composite to an appropriate annealing heat treatment where TiH2 particles decompose to hydrogen and titanium. In this work, the effect of number of ARB cycles on the size and distribution of... 

This project examines four alternatives such as pipelines, oil injection wells, LNG & GTL in the purpose of Iran gas utilization. In this Project four strategies using cost/benefit analysis are examined. For this purpose, at first the cost of inlet feed gas per Mmbtu are calculated. Then regarding various scenarios of average world gas prices for the following thirty years, the cost & benefit of any way will be counted. Then with the use of energy security, the project will make energy policy. For this purpose, Shannon indicator will be used as one of the most reliable indicators. Due to the of use this indicator, the popular project will be chosen accordingly as a certain amount of gas the... 

Cloud computing offers its customers and organizations many advantages such as turning CAPEX to OPEX in the business side, and enabling scalability and fast and easy resource provisioning in the technical side. Using these features, companies can benefit from deployment in the cloud at a lower cost, and at the same time, focus more on their business. Therefore, many organizations are migrating their vital systems to the cloud because of its many benefits. Research on this topic has been started a few years ago, and since then, many approaches including architecture-based, model-driven, and SOA-based approaches have been proposed. Some of these solutions are just adaptations of the... 

In software programs, most of the time, there is a chance of error, even though they are tested carefully. Finding error-related pieces of code is one of the most complicated tasks and it can make incorrect results if done manually. Semi-automated and fully-automated methods have been introduced to overcome this issue. The rapid growth of developing smart mobile applications (SMAs) in recent years, competition among the development teams and many other factors have increased the chance of errors and hence, the quality of these applications have reduced. There are two approaches to test SMAs in order to reach a high degree of quality: (1) using existing traditional methods and adapting them... 

Aeroelasticity analysis and prediction of wind turbines sturcture deformations are fundamental parts in their design. Increasing the size of wind turbine blades and development of Mega-watt sized wind turbines have enhanced the importance of these studies. In this study, the aeroelasticity analysis of a wind turbine blade has been done based on flexible multibody dynamics method. For this purpose, the modal approach has been used for modeling blade structure which has been considered as a flexible beam with bending and torsion degrees of freedom. The unsteady vortex lattice method has been used to calculate aerodynamic loads in order to combine with wind turbine blade structure model. Using... 

New materials as hybrid materials or laminate composites, due to combination of many properties, can be used in many industries. The aim of this research is bonding of three-layered St/AZ31/St composite by roll-bonding process. The roll-bonding process was performed at three preheating temperatures, 340, 400 and 450 ⁰C, with thickness reduction of 30 to 68% and different thicknesses of intermediate layer (AZ31). In order to improve the bonding strength, the as-rolled specimens were annealed at constant temperature of 375 ⁰C. For evaluation of bond strength and investigating the formation of a diffusion layer, the results of peel test and microscopic images were studied. Tensile specimens... 

In recent years, with the rise of the smartphones, mobile apps have seen unprecedented growth and their stores have gained popularity among users. The direct connection of users to these stores and the ability to comment on the applications, have made them big repositories of information. In particular, user reviews provide developers with valuable information on strengths and weaknesses of application and users' problems when using it, which can serve as a guide to improve their application.There are a lot of research on exploring user reviews but few have been trying to find a link between reviews and source code of application. In this research, for the first time, all of the code... 

Due to financial resources constraints, the country's oil industry, especially the upstream oil sector accounting for most of the country's foreign exchange and budget revenues, has not been developed. Thanks to the international sanctions against our country, the conventional financing methods are difficult to use anymore. According to the the current circumstances, the alternative sources of funding using modern approaches are necessary. Moreover, small capital is one of the alternative sources with the high potential for the high level of the liquidity in the society. This study, investigates the financial tools regarding capital market to attract small capital in order to finance... 

Dental implants should be biocompatible. This ability cause bone growth beside implant and increases stability of implant. Manufactoring method and materials used in implants are main parameters affectig biocompatibility of implants. Fabrication of functionally graded structures is a novel method to increase biocompatibility. Stress shielding is one of the main causes of failures in current dental implants. This phenomenon takes place due to different young modulus of dental implants and host bone. Pouros structures remedial this problem and implant’s young modulus comes closer to host bone. The aim of this project is to study feasibily of fabrication of functionally graded titanium dental... 

Developers have been spending a lot of time on program comprehension during software evolution. Program comprehension reduces the cost and the software development time and increases maintainability of a program. However, the lack of documentation makes this process exhausting. Source code summarization is one of the existing solutions to help developers understand a program. Source code summarization gives an opportunity for the developers to better understand the source code by spending less time. There are a lot of approaches for source code summarization. For instance, exploiting knowledge of the crowd, information retrieval, deep neural networks, or using eye tracking of developers... 

Nowadays, the tendency to use Al/SiC composites with FGM structure has increased in the automotive and aerospace industries, because in this type of composite, the properties can be gradually changed in the direction of thickness. For example, one composite surface is used as a wear-resistant or high-temperature-resistant coating, and the other surface can be welded, has high thermal conductivity, or has a good toughness. In recent years, methods have been used to make surface composites, most of which are in the molten state and at high temperatures. In this case, the reactions between the compounds can not be easily controlled and the possibility of the formation of undesirable or... 

The subsidies targeting law was ratified on October 23, 2009. At mentioned law appointed that the government redistributes up to 50% of earned revenues from price reforming of energy carriers to households by cash and non-cash payments and 30% of earned revenues to the production sector. But reports studies indicate that from 2010 to 2016, the government allocated 93.4% of the revenues to households in cash and non-cash and only 0.7% to the production sector. It can, therefore, be concluded that the subsidies targeting law has not been properly implemented. Indeed, the government has not only failed to fully reform energy carriers prices, but also has increased the households’ share of... 

In present research, a new system of energy extraction from water flow has been studied and optimized. This semi-active energy harvesting system consists of an airfoil that is connected to the generator by an arm. The passage of water causes the airfoil to move, so the hydrodynamic forces on the airfoil will cause the arm to move and finally the generator. In this research, complete dynamic modeling of this energy extraction system including generator, airfoil, controller and actuator modeling is presented and the governing dynamic equations are extracted using this modeling for dynamic simulation. Two dimensional fluid simulations have also been performed using fluent software. Finally, in... 

The Oil and gas industry is one of the most important industries in the world. It has great role in Iran’s economy also. Regarding complexities of new companies, there is room for more cooperation and coordination within the industry and with other actors. Oil and gas niches have close interdependency with financial sector. The new encrypted currencies play great role in new financial models. Blockchain technology can help the oil and gas industry by using its appropriate features. Blockchain is a system of recording information in a way that makes it difficult or impossible to change, hack, or cheat the system. The supply chain of oil and gas industry in Iran includes upstream, midstream... 

Client applications are often developed with the help of software frameworks in order to reduce the development costs and to increase the software quality. However, frameworks may evolve to add new features or to fix bugs, and thus, their APIs may change at the same time. Nevertheless, these API changes can cause the client applications to not work properly. New frameworks typically use the deprecation mechanism to reduce this effect, but their documents often do not provide sufficient information. Consequently, deprecated APIs usages remain unresolved in client applications. To tackle this issue, we introduce ARFES (Automated Recommender of Framework Evolution Solutions) that provides... 

Due to increased mortality from Coronary Heart Disease, it is important to work on ways to treat this disease. An effective method of treatment on this disease is the coronary stent implantation. There are nearly two decades passed since implanting the first heart stent. The main objective of this research is design and manufacturing of the medical stents of stainless steel 316 L. Stent materials should have excellent corrosion resistance and biocompatibility. Various materials such as stainless steel 316 L, platinum alloys, niobium alloys, cobalt alloys are used for manufacturing the stents. In this project, at the first stage seam tube was prodected with laser welding of a tube with... 

The trend of increasing energy intensity in the country, despite awareness of the officials and managers of the need to take action to improve it, is ongoing. Various studies conducted worldwide to improve the productivity of energy. These studies suggest ways for improving energy intensity; suggestions that will never be implemented, because of lack of utility consideration of actors. In this research, in search for energy intensity reduction barriers in the industrial sector of the country, a game theoretical approach has been applied. In this study’s modeling, energy consuming firms as an actor, compete with each other and the government as an important actor in the implementation or...