Sharif Digital Repository

Selective laser sintering is an additive manufacturing technique based on fusion of powder bed, wherein after spreading a powder layer, a focused laser beam directs onto selected points of powder bed to fuse powder particles together. This process is repeated layer by layer until the final part is created. Although utilization of blade as a conventional powder spreading (CPS) mechanism has a good compression ability, the fixed contact line between blade and powder bed surface results in improper powder flowability and increasing shear forces applied on underneath layer. In this study, in order to obtain the basis for conducting practical experiments, discrete element simulation of powder... 

Energy subsidies are one of the most challenging issues for many countries in the world, specially oil and gas exporting countries. Iran is one of the countries that has lost more than ten percent of its GDP due to energy subsidies in recent years. In this thesis, we are going to analyze experiences of different countries and try to provide policy makers with generalizations about this problem so they can implement reform policies more successfully. We have used Qualitative Comparative Analysis (QCA) methodology. This method can provide modest generalizations by using systematic cross-case comparison between a small number of cases. Details of this method and reasons behind choosing it are... 

In this study, Al-5052 aluminium alloy sheet was lap joined to aluminium clad steel sheet using pulsed gas tungsten arc welding and Al-Si filler metal. Effect of heat-input, thickness of clad layer and frequency were investigated on the formation of intermetallic reaction layer, microstructure of the weld seam and shear strength of the joints are explored. Stress analysis in weld is also used in order to justify the fracture location in the welds the microstructure and shear-tensile strength of the welds (joining with A1-1050 clad layer with two thickness of 350 μm and 1000 μm). Before welding, aluminum clad steel sheets were produced by roll bonding and 450 °C annealing temperature and 90... 

Existing face forgery detection methods mainly focus on certain features of images, such as features related to image noise, local textures or frequency statistics of images for forgery detection. This makes the extracted representations and the final decision depend on the data in the database and makes it difficult to detect forgery with unknown manipulation methods. Solving this challenge, which is called the generalization challenge in artificial intelligence literature, has become the main goal of researchers in this field. In this thesis, the focus is on extracting effective features for success in forgery detection and preventing the performance of the forgery detection network from... 

One of the most important problems in machine learning is investigating the performance of the learning algorithms, and especially deep neural networks, on adversarial examples, which are generated by imperceptibly perturbing input images, so that cause the model make a wrong prediction. Not only this line of research is important for making deep neural networks dependable, but also can help with understanding the fundamental limitations of deep neural networks, and the nature of their operation, which can in turn provide researchers with valuable insights into artificial intelligence. In this research work, we have tried to approach the topic with a mainly theoretical mindset. The method we... 

Today, the need for high-speed machine tools, in areas such as defense, medical and electronic for producing parts with millimeter dimensions, and with features smaller than the millimeter, increased. To meet this need, the machine tool can be used with smaller dimensions and with high speed. These machines are able to produce these parts with high production rates.The project aims to improve technical design and construction of a micro spindle to achieve sustained speed about one hundred thousand RPM. In this project, the first step in understanding the fundamentals of the theory and the system components, and the whole operation was performed. The design is based on studies carried out in... 

For validation of simulation, plasma actuator was modelled on a flat plate in quiescent flow, which is result in low-speed jet near the wall. The results were compared with similar model and were showed good agreement with them. After that, blade was modelled in three-dimensional manner with MRF technique and periodic method and the results were validated in clean situation (absence of plasma). In the following, turbine was analysed with a code, which was written in MATLAB software based on BEM method and the results were compared with present CFD simulation. Then, plasma actuator was used in chordwise in parts of the blade to improve wind turbine performance. Also it was used in spanwise... 

Selective Laser Sintering (SLS) is one of the powder-based Additive Manufacturing (AM) technology in which parts built by CO2 laser. In this research work, Titanium-PMMA-Stearic Acid powders are mixed together to produce parts by Indirect Metal Laser Sintering (IMLS) method. The optimum process parameters such as energy density, Percentage composition of Titanium-PMMA and Scan Sintering are obtained by adopting the Taguchi method for getting the maximum density and minimum porosity. Experiments are planned by Taguchi’s Mix-L8 orthogonal array. According to the results obtained from this study, the percentage of combination Ti-PMMA and Energy density, respectively, are a major parameters that... 

Wind energy technologies guarantee low pollution and operational costs. Using a DFIG and a fractionally rated power electronics converter gives variable speed operation with a low cost drive train. As energy policy organizations have allocated a considerable quota of wind energy generation to offshore wind farms, the absence of slip rings and brushes in the brushless DFIG (BDFIG) is an advantage for offshore wind turbines where maintenance is vital and expensive. With increasing wind power penetration in power systems, grid code requirements are an important consideration for the ride-through capability of wind farms through voltage dips, particularly for multi- MW wind turbine generators.... 

The new generation of advanced high-strength steels use in the automotive industry cause resistance spot welding study and their failure characteristics during static and dynamic loading are important. In this study, the relationship among microstructure, failure mode and mechanical properties are investigate during similar and dissimilar DP980 and MS1400 jointing advanced high-strength steels resistance spot welding. To search for micro and macro structural changes, the optical microscope, stereographic microscope and scanning electron microscope were used. Micro-hardness test, tensile shear test and Cross tension test to evaluate the mechanical properties were conducted. As well as... 

Friction Stir Processing (FSP) was used to fabricate Al1050/Fe3O4 nanocomposite in three different weight percent (2.5%, 4% and 5.3%). The effects of rotational speed (1200-1600 rpm), traverse speed (5-15 cm/min) and the number of FSP passes (1, 2, 3 and 6 passes) on microstructure and mechanical properties were investigated. In order to study microstructure evolution, optical and field emission scanning electron microscopes were used. Micro hardness, longitudinal and transverse tensile and wear test were carried out to investigate mechanical properties of the obtained composites. Results showed that increase of the rotational speed and decrease of the traverse speed in 1 pass processed...