Sharif Digital Repository

Shock control bump (SCB), suction and blowing are three flow control methods used to control the shock wave/boundary layer interaction to reduce the resulting wave drag in transonic flows. An SCB uses a small local surface deformation to reduce the shock wave strength, while the suction decreases the boundary layer thickness and the blowing delays the flow separation. Here, we will use a multi-point continuous adjoint optimisation scheme to find the optimum design of suction and blowing separately or together, or with the SCB, on two supercritical airfoils, i.e. RAE-5225 and RAE-2822, for a wide range of off-design transonic Mach numbers. The RANS flow equations are solved using the Roe’s... 

A shock control channel (SCC) is a flow control method introduced here to control the shock wave/boundarylayer interaction (SWBLI) in order to reduce the resulting wave drag in transonic flows. An SCC transfers an appropriate amount of mass and momentum from downstream of the shock wave location to its upstream to decrease the pressure gradient across the shock wave and as a result the shock-wave strength is reduced. Here, a multi-point optimization method under a constant-lift-coefficient constraint is used to find the optimum design of the SCC. This flow control method is implemented on a RAE-2822 supercritical airfoil for a wide range of off-design transonic Mach numbers. The RANS flow... 

This article is devoted to the numerical investigation of the shock wave/boundary layer interaction (SWBLI) as the main factor influencing the aerodynamic performance of transonic bumped airfoils and wings. The numerical analysis is conducted for the ONERA-M6 wing through a shock control bump (SCB) shape optimisation process using the adjoint optimisation method. SWBLI is analyzed for both clean and bumped airfoils and wings, and it is shown how the modified wave structure originating from upstream of the SCB reduces the wave drag, by improving the boundary layer velocity profile downstream of the shock wave. The numerical simulation of the turbulent viscous flow and a gradient-based adjoint... 

A shock control channel (SCC) is a flow control method introduced here to control the shock wave/boundarylayer interaction (SWBLI) in order to reduce the resulting wave drag in transonic flows. An SCC transfers an appropriate amount of mass and momentum from downstream of the shock wave location to its upstream to decrease the pressure gradient across the shock wave and as a result the shock-wave strength is reduced. Here, a multi-point optimization method under a constant-lift-coefficient constraint is used to find the optimum design of the SCC. This flow control method is implemented on a RAE-2822 supercritical airfoil for a wide range of off-design transonic Mach numbers. The RANS flow... 

In this work performances of adaptive backstepping controller (BSC) and globally linearizing controller (GLC) are compared for pH control. First, based on the system full order model a GLC has been designed and it has been shown that this controller is identical to BSC proposed in the literature. Next in order to avoid state estimator design, BSC and GLC are designed based on pH reduced order model and their identities have been established. Through computer simulations, it has been shown that the performance of non-adaptive GLC designed based on reduced order model is better than that of adaptive BSC designed based on pH full order model which requires state measurement for implementation.... 

This paper presents a control strategy for the autonomous (islanded) operation of a distributed generation (DG) unit. The DG unit supplies a balanced load through a voitage-sourced converter (VSC). To maintain the autonomous operation in the islanded mode, the DG unit should provide its dedicated load with a sinusoidal voltage with a constant magnitude and a constant frequency. The dynamic model of the islanded DG system is represented by a set of nonlinear equations. Since the objective is to regulate voltage and frequency of the islanded DG about their rated values, the nonlinear model is linearized about the operating point. The obtained linearized model represents a multivariable LTI... 

The quantity and quality of scientific output of the topmost 50 countries in the four basic sciences (agricultural & biological sciences, chemistry, mathematics, and physics & astronomy) are studied in the period of the recent 12 years (1996-2007). In order to rank the countries, a novel two-dimensional method is proposed, which is inspired by the H-index and other methods based on quality and quantity measures. The countries data are represented in a "quantity-quality diagram", and partitioned by a conventional statistical algorithm into three clusters, members of which are rather the same in all of the basic sciences. The results offer a new perspective on the global positions of countries... 

In this paper, an adaptive control scheme, based on fuzzy logic systems, for pH control is addressed. For implementation of the proposed scheme no composition measurement is required. Stability of the closed-loop system is established and it is shown that the solution of the closed-loop system is uniformly ultimately bounded and under a certain condition, asymptotical stability is achieved. Effectiveness of the proposed controller is tested through simulation and experimental studies. Results indicate that the proposed controller has good performances in set-point tracking and load rejection and much better than that of a tuned PI controller. © 2009 Elsevier Ltd. All rights reserved  

pH control is a challenging problem due to its highly nonlinear nature. In this paper the performances of two different adaptive global linearizing controllers (GLC) are compared. Least squares technique has been used for identifying the titration curve. The first controller is a standard GLC based on material balances of each species. For implementation of this controller a nonlinear state estimator is used. Some modifications are proposed to avoid the singularity of the observer gain. The second controller is designed based on the reduced state equation. Through computer simulations, it has been shown that the performances of the second GLC is superior and it is more robust to process... 

We consider biobjective shortest path problems in networks with fuzzy arc lengths. Considering the available studies for single objective shortest path problems in fuzzy networks, using a distance function for comparison of fuzzy numbers, we propose three approaches for solving the biobjective problems. The first and second approaches are extensions of the labeling method to solve the single objective problem and the third approach is based on dynamic programming. The labeling methods usually producing several nondominated paths, we propose a fuzzy number ranking method to determine a fuzzy shortest path. Illustrative examples are worked out to show the effectiveness of our algorithms  

During the past decades, development of reinforcing materials caused a revolution in the structure of high strength and high performance cement-based concrete. Among the most important and exciting reinforcing materials, Steel Fiber (SF) becomes a widely used in the recent years. The main reason for addition of SF is to enhance the toughness and tensile strength and limit development and propagation of cracks and deformation characteristics of the SF blended concrete. Basically this technique of strengthening the concrete structures considerably modifies the physical and mechanical properties of plain cement-based concrete which is brittle in nature with low flexural and tensile strength... 

In this investigation, the effect of microstructural constituents on thermal fatigue resistance of A319 aluminum casting alloy was studied. For this purpose, both thermo-mechanical fatigue and thermal-shock fatigue experiments were performed in thermal cycling range between 40 and 250 °C. Following the results, samples with finer SDAS, lower porosity volume fraction and lower brittle intermetallic contents, as well as higher Si modification showed better thermal fatigue resistance. Moreover, T6 and T7 heat treatments appeared to be highly beneficial for thermal fatigue performance. According to the fractography analysis, porosities and coarse intermetallic phases were determined as the most...