Sharif Digital Repository

Poly(vinyl alcohol)-polyethylene glycol, PVA-PEG, blended membrane were prepared using supercritical fluid assisted phase-inversion method, in which scCO2 was used as the anti-solvent. Poly(vinyl alcohol) was utilized as the main polymer, polyethylene glycol as the additive, and dimethyl sulfoxide (DMSO) as the solvent of these polymers. Taguchi method was used to investigate the effect of some operating parameters on the morphology of the membranes. The L16 orthogonal array was selected under the following conditions: pressure (100, 135, 165 and 200 bar), temperature (40, 45, 50 and 55°C) and PEG weight percent (0, 0.33, 0.66, and 1%). Total polymer concentration of solutions in all... 

Extraction of the essential oil from a medicinal plant called Dracocephalum kotschyi Boiss was performed by green technology of supercritical carbon dioxide (SC-CO2) extraction. A Taguchi orthogonal array design with an OA16 (45) matrix was used to evaluate the effects of five extraction variables: pressure of 150-310bar, temperature of 40-60°C, average particle size of 250-1000μm, CO2 flow rate of 2-10ml/s and dynamic extraction time of 30-100min. The optimal conditions to obtain the maximum extraction yield were at 240bar, 60°C, 500μm, 10ml/s and 100min. The extraction yield under the above conditions was 2.72% (w/w) which is more than two times the maximum extraction yield that has been... 

Several lattice Boltzmann models for multi-phase flow have been developed, but few of them are capable of modeling fluid flows with high density ratio in the order of 1000. Therefore, an advanced chromodynamics, Rothmann-Keller (RK) type model is employed in current study, which can handle liquid-gas density ratio in the order of 1000 and viscosity ratio in the order of 100. Other distinctive characteristics of the proposed model are high stability, and capability of setting parameters such as surface tension independently. In spite of these benefits, the original RK model fails to model wetting tendency of the fluids. As a result, it is impossible to correctly simulate two-fluid phase flow... 

In this study, the kinetics of aging in AA6061 and AA6061 with 5% volume fraction SiCp were studied and compared. The composite was first produced and homogenized using stir casting technique followed by hot extrusion with the ratio of 18:1. Then, both AA6061 and the composite were aged at three different temperatures including room temperature, 170 °C and 240 °C, while mechanical properties during aging were evaluated employing hardness measurements and tensile testing. Moreover, in order to assess the effect of plastic deformation on the kinetics of aging, a series of samples were first deformed by equal-channel angular pressing immediately after solution treatment and then aged in the... 

Infinite series solutions are obtained for electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties of long pH-regulated rectangular nanochannels of low surface potential utilizing the double finite Fourier transform method. Closed form expressions are also obtained for channels of large height to width ratio for which the depthwise variations vanish. Neglecting the Stern layer impact, the effects of EDL (Electric Double Layer) overlap, multiple ionic species, and association/dissociation reactions on the surface are all taken into account. Moreover, finite-element-based numerical simulations are conducted to account for the end effects as well... 

During preliminary investigation phase of the national Chabahar-Zahedan railway line, serious geotechnical problems including non-uniform settlements, tensile cracks, and local collapse were reported in parts of the path near the coastline. A follow-up field investigation revealed that the in-situ soil at construction site has a metastable structure being sensitive to saturation and loading. Therefore, a comprehensive series of physical, chemical, electro-chemical, and geotechnical tests were conducted to classify and characterize the soil properties and behavior in its natural state. The natural soil was classified as a clayey loess with moderately dispersive to dispersive characteristics.... 

Lysozyme loaded niosomes containing various molar ratios of two kinds of surfactants were prepared and the properties of these niosomal formulations were studied. The results revealed that the size of niosomes varied between 240.06 ± 32.41 and 895.2 ± 20.84 nm. Formulations with the lowest size and no precipitation had entrapment efficiencies ranging from 60.644 ± 3.310 to 66.333 ± 1.98%. Their controlled release profiles after 48 h were 15.67, 20.67 and 31.50%. After 2 months, the most stable formulation in terms of size, PDI, zeta potential, and entrapment efficiency was used to study the secondary structures of lysozyme in niosomal and free forms. Lysozyme loaded niosome and lysozyme... 

Semi-analytical solutions are obtained for the electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties associated with long pH-regulated nanochannels of arbitrary but constant cross-sectional area. The effects of electric double layer overlap, multiple ionic species, and surface association/dissociation reactions are all taken into account, assuming low surface potentials. The method of analysis includes series solutions which the pertinent coefficients are obtained by applying the wall boundary conditions using either of the least-squares or point matching techniques. Although the procedure is general enough to be applied to almost any... 

The dispersion of a neutral solute band by electrokinetic flow in polyelectrolyte layer (PEL)-grafted rectangular/slit microchannels is theoretically studied. The flow is assumed to be both steady and fully developed and a first-order irreversible reaction is considered at the wall to account for probable surface adsorption of solutes. Considering low electric potentials, analytical solutions are obtained for electric potential, fluid velocity and solute concentration. Special solutions are also obtained for the case without wall adsorption. To track the dispersion properties of the solute band, the generalized dispersion model is adopted by considering the exchange, the convection and the... 

A new type of collapsible soil was encountered in Southern Iran and caused some serious technical problems including subsidence, collapse and sinkholes during the construction of Zahedan-Chabahar railway. Field observations indicated that in-situ soil contains excessive amount of salts resulting in dispersive features in response to seepage forces in addition to its collapsibility. Therefore, a systematic research plan including field sampling and laboratory testing was carried out to investigate the observed geotechnical features. Results of physio-chemical tests revealed the dominance of Sodium in excess of 70% relative to total dissolved salts, which results in high dispersive potential.... 

The polysaccharide, kappa-carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′-methylene bisacrylamide (MBA) were used as a free-radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC-g-PMAM or hydrolyzed κC-g-PMAM (PMAM: polymethacrylamide) was characterized by FT-IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and... 

This paper presents a bi-objective VMI problem in a single manufacturer-single vendor multi-retailer (SM-SV-MR) supply chain, which a redundancy allocation problem is incorporated. In the hybridized problem, a manufacturer produces a single item using several machines that work in series, and stores it in a warehouse to replenish one vendor who delivers it to several retailers using the shortest possible route. A novel meta-heuristic, called hybrid bat algorithm (HBA), with calibrated parameters is utilized to find a near-optimum solution. To show the efficiency of HBA, the results are compared to the ones using the traditional BA and a genetic algorithm  

The vendor-managed inventory (VMI) is a common policy in supply chain management (SCM) to reduce bullwhip effects. Although different applications of VMI have been proposed in the literature, the multi-vendor multi-retailer single-warehouse (MV-MR-SW) case has not been investigated yet. This paper develops a constrained MV-MR-SW supply chain, in which both the space and the annual number of orders of the central warehouse are limited. The goal is to find the order quantities along with the number of shipments received by retailers and vendors such that the total inventory cost of the chain is minimized. Since the problem is formulated into an integer nonlinear programming model, the... 

In this paper, a multi-item economic production quantity model with fuzzy demand is developed in which shortages are backordered and the warehouse space is limited. While the demand is assumed to be a trapezoidal fuzzy number, the centroid defuzzification method is used to defuzzify fuzzy output functions. The Lagrangian relaxation procedure is first employed to solve the problem. Then, the model is extended to a constrained fuzzy integer nonlinear programming, in order to suit real-world situations. As the extended model cannot be solved in a reasonable time using exact methods, two meta-heuristic algorithms, named the genetic algorithm (GA) and the particle swarm optimisation (PSO) each...