Loading...
Search for: saki--mohammad
0.124 seconds

    Fabrication and Characterization of Inverted Perovskite Solar Cells Using Nickel Oxide as Hole Transporting Layer

    , Ph.D. Dissertation Sharif University of Technology Saki, Zahra (Author) ; Taghavinia, Nima (Supervisor)
    Abstract
    In this research, we study and optimize the inverted perovskite solar cells (PSCs) using nano layers of NiOx and Li:NiOx as hole transporting layers (HTLs) and nano layers of PC70BM and C60 as electron transporting layers (ETLs). We fabricated inverted PSCs with three different HTLs, namely MoOx, PEDOT:PSS and NiOx, using vapor assisted solution processed (VASP) method for making MAPbI3 perovskite which yielded a power conversion efficiency (PCE) of 1%, 1.93% and 3.65%, respectively. Solution-processed deposition method, high transparency (˃90%) and high band gap (3.9 eV) are the most advantages to use NiOx as HTL in current research. Using lithium as dopant to the NiOx increases the... 

    Investigation of The Treatment of Wastewater Containing Antibiotics by Using MBBR

    , M.Sc. Thesis Sharif University of Technology Saki, Abbas (Author) ; Borghei, Mehdi (Supervisor)
    Abstract
    Antibiotic medications are widely used in medicine and veterinary medicine. Since these drugs are extremely dangerous to the environment and specially to drinking water for humans and other organisms, the need to treat these wastewater is becoming increasingly important. One of the most commonly used antibiotics is oxytetracycline which is used for a wide range of infectious diseases Husbandry wastewater is one of the wastewaters that contains high diversity and large amounts of antibiotics. In this study, the performance of a Moving bed biofilm reactor (MBBR) was investigated for removal of oxytetracycline from synthetic wastewater with similar characteristics to Husbandry wastewater. A... 

    Capture, Processing and Transmitting Images From Downhole Camera

    , M.Sc. Thesis Sharif University of Technology Saki, Mohammad (Author) ; Movahedian, Hamid (Supervisor)
    Abstract
    The goal of this project, has been designing a downhole camera, which captures images from environment of a well and transmits that to the surface. High temperature and pressure of well environment and corrosion and limitation in data transmission rate which is because of mono conductor cable, are the challenges of designing this system. For doing that, first, the principles of image compression are explained. Then, based on that, an image compression system based on wavelet transform has been designed. Its components are examined too. For making the introduced system resistant to the high pressure and temperature, using an isolated case is suggested. For implementation, an... 

    Optimal Trajectory Planning for Aircraft Microgravity Atmospheric Maneuver

    , M.Sc. Thesis Sharif University of Technology Saki, Reza (Author) ; Pourtakdoust, Hossein (Supervisor)
    Abstract
    The purpose of the current study is to design an optimal trajectory and control for an aircraft to perform a microgravity maneuver automatically. This subject is by itself an important research topic that has not yet been attempted via optimal control formulation and modelling. Space stations are commonly utilized to conduct long-term microgravity research. Unfortunately utility of space stations to perform space based microgravity experiments is expensive and inaccessible for many researchers and scientific institutions. However, since many experiments requiring microgravity conditions can be performed in short time intervals, there is a possibility to meet their demand via optimal... 

    Possible Impacts of Telework Initiated by COVID-19 Outbreak on Teleworkers’ Psychological Well-being: A Qualitative Study

    , M.Sc. Thesis Sharif University of Technology Saki, Mana (Author) ; Alavi, Babak (Supervisor)
    Abstract
    This research explores the impacts of the telework initiated by the outbreak of COVID-19, which is being called “emergent telework” in this research, on psychological well-being of teleworkers. As for the nature of emergent telework which is a new and unique phenomenon, a qualitative research is conducted. In order to do so, 15 in-depth interviews were held with employees from product teams of 11 organizations, and the interviews were analyzed using thematic analysis. General conditions of teleworking are identified in two categories named as “not working adjacent to coworkers” and “being away from the physical environment of the workplace”. Emergent telework, alongside the general... 

    The effect of lithium doping in solution-processed nickel oxide films for perovskite solar cells

    , Article ChemPhysChem ; Volume 20, Issue 24 , 2019 , Pages 3322-3327 ; 14394235 (ISSN) Saki, Z ; Sveinbjornsson, K ; Boschloo, G ; Taghavinia, N ; Sharif University of Technology
    Wiley-VCH Verlag  2019
    Abstract
    The effect of substitutional Li doping into NiOx hole transporting layer (HTL) for use in inverted perovskite solar cells was systematically studied. Li doped NiOx thin films with preferential crystal growth along the (111) plane were deposited using a simple solution-based process. Mott-Schottky analysis showed that hole carrier concentration (NA) is doubled by Li doping. Utilizing 4 % Li in NiOx improved the power conversion efficiency (PCE) of solar devices from 9.0 % to 12.6 %. Photoluminescence quenching investigations demonstrate better hole capturing properties of Li:NiOx compared to that of NiOx, leading to higher current densities by Li doping. The electrical conductivity of NiOx is... 

    Solution-processed perovskite thin-films: The journey from lab: The large-scale solar cells

    , Article Energy and Environmental Science ; Volume 14, Issue 11 , 2021 , Pages 5690-5722 ; 17545692 (ISSN) Saki, Z ; Byranvand, M. M ; Taghavinia, N ; Kedia, M ; Saliba, M ; Sharif University of Technology
    Royal Society of Chemistry  2021
    Abstract
    In the last decade, the power conversion efficiency (PCE) of solution-processed perovskite solar cells (PSCs) in the lab-scale has reached an incredible level of 25.5%. Generally, PSCs are composed of a stack consisting of a perovskite thin-film sandwiched between an electron transporting layer (ETL) and a hole transporting layer (HTL). Although the quality of the ETL and HTL interfaces with the perovskite thin-film is important, the quality of the perovskite thin-film is also critical to achieving high-performance PSCs. Low-temperature deposition of organic-inorganic perovskite thin-films by simple solution processes is one of the significant advantages of PSCs compared to other... 

    Modified antisolvent method for improving the performance and stability of triple-cation perovskite solar cells

    , Article ACS Omega ; Volume 6, Issue 1 , 2021 , Pages 172-179 ; 24701343 (ISSN) Samadpour, M ; Golchini, A ; Abdizadeh, K ; Heydari, M ; Forouzandeh, M ; Saki, Z ; Taghavinia, N ; Sharif University of Technology
    American Chemical Society  2021
    Abstract
    Antisolvent crystallization is known as an effective approach for the deposition of pinhole-free solution-processed perovskite layers for high-performance solar cells. Here, we introduce a modified antisolvent dripping method by adding tetra ethyl orthosilicate (TEOS) into chlorobenzene as a conventional antisolvent. Through TEOS modification, perovskite solar cells show efficiencies as high as 16% with more than 85% retention after 290 h storage at ambient conditions in comparison to 20% in pristine cells. This significant enhancement in efficiency and stability mainly related to the decrement of the density of surface defects, which is confirmed by considerably enhanced photoluminescence... 

    Mathematical Modeling of Diffusion in Fractured Media for Gas Injection

    , M.Sc. Thesis Sharif University of Technology Saki, Mohammad (Author) ; Masihi, Mohsen (Supervisor) ; Shadizadeh, Reza (Supervisor) ; Ayatollahi, Shahabeddin (Co-Advisor)
    Abstract
    It is common to inject gas in naturally fractured reservoirs to maintain the reservoir pressure. Recovery will be the result of the complex interplay of several mechanisms such as viscous flow, extraction by molecular diffusion, gravity drainage, oil swelling and capillary force. Generally the main mechanism is gravity drainage However in many cases like low permeability of matrix, small matrix block size and high capillary pressure; gravity drainage may be very low or ineffective. Low permeability results inefficient viscous displacement too. Therefore in these cases the main mechanism is diffusion. The parameters influences the diffusion are: The nature of the injected gas, the composition... 

    Atomic layer deposition of electron selective snox and ZnO films on mixed halide perovskite: compatibility and performance

    , Article ACS Applied Materials and Interfaces ; Volume 9, Issue 35 , 2017 , Pages 29707-29716 ; 19448244 (ISSN) Hultqvist, A ; Aitola, K ; Sveinbjörnsson, K ; Saki, Z ; Larsson, F ; Törndahl, T ; Johansson, E ; Boschloo, G ; Edoff, M ; Sharif University of Technology
    2017
    Abstract
    The compatibility of atomic layer deposition directly onto the mixed halide perovskite formamidinium lead iodide:methylammonium lead bromide (CH(NH2)2, CH3NH3)Pb(I,Br)3 (FAPbI3:MAPbBr3) perovskite films is investigated by exposing the perovskite films to the full or partial atomic layer deposition processes for the electron selective layer candidates ZnO and SnOx. Exposing the samples to the heat, the vacuum, and even the counter reactant of H2O of the atomic layer deposition processes does not appear to alter the perovskite films in terms of crystallinity, but the choice of metal precursor is found to be critical. The Zn precursor Zn(C2H5)2 either by itself or in combination with H2O during... 

    The synergistic effect of dimethyl sulfoxide vapor treatment and C60 electron transporting layer towards enhancing current collection in mixed-ion inverted perovskite solar cells

    , Article Journal of Power Sources ; Volume 405 , 2018 , Pages 70-79 ; 03787753 (ISSN) Saki, Z ; Aitola, K ; Sveinbjörnsson, K ; Yang, W ; Svanström, S ; Cappel, U. B ; Rensmo, H ; Johansson, E. M. J ; Taghavinia, N ; Boschloo, G ; Sharif University of Technology
    Elsevier B.V  2018
    Abstract
    Inverted perovskite solar cells (PSCs) have been introduced as better candidate for roll-to-roll printing and scale-up than their conventional configuration counterparts, while their fabrication is technically more demanding. The common light absorbing layer in inverted PSCs is the single cation methylammonium lead iodide (MAPbI3) perovskite, whereas mixed-ion perovskites are chemically more stable. In mixed-ion perovskites, where FA (formamidinium) is the main replacement for MA, the electron affinity is larger than in MAPbI3 perovskites, leading to possible barriers against photoelectron collection by the electron transporting layer (ETL). In this paper we report on a mixed-ion... 

    Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent

    , M.Sc. Thesis Sharif University of Technology Mohammad Karami (Author) ; Bazargan, Mohammad (Supervisor)
    Abstract
    The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir.... 

    Numerical Analysis of An Annular Gas Turbine Combustor

    , M.Sc. Thesis Sharif University of Technology Gandomi, Mohammad Hossein (Author) ; Farshchi, Mohammad (Supervisor)
    Abstract
    The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

    A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]

    , Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 Sedghi, H. (Haniyeh) ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
    Abstract
    Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

    Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating

    , Ph.D. Dissertation Sharif University of Technology Labbaf, Mohammad Hossein (Author) ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)

    Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet

    , M.Sc. Thesis Sharif University of Technology Mohammadi, Mohammad Ali (Author) ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
    Abstract
    In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms  

    SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers

    , M.Sc. Thesis Sharif University of Technology Omati, Mohammad Mahdi (Author) ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
    Abstract
    During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of... 

    Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks

    , M.Sc. Thesis Sharif University of Technology Shokouhi, Mohammad Hossein (Author) ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
    Abstract
    Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to... 

    Simulation and Control of an Aromatic Extractive Distillation Column

    , M.Sc. Thesis Sharif University of Technology Karima, Mohammad Mahdi (Author) ; Shahrokhi, Mohammad (Supervisor)
    Abstract
    In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all... 

    Investigation of Transport Phenomena in Clarification of Beer by Membrane Using CFD Method

    , M.Sc. Thesis Sharif University of Technology Kazemi, Mohammad Amin (Author) ; Soltanieh, Mohammad (Supervisor)
    Abstract
    During the brewing process, beer alternately goes through different chemical and biochemical reactions and solid–liquid separation stages. The clarification at the final step of brewing is a highly critical stage when it comes to producing a clear and bright beer. Recently, membrane technology has been successfully used in beer clarification, wherein Kieselguhr (diatomaceous earth) filtration is replaced by cross-flow microfiltration. The most important disadvantages of using microfiltration in clarification of beer is the fouling and flux decline during the process. The phenomenology of fouling mechanisms is still undefined and selection of an appropriate technique for flux enhancement in...