Sharif Digital Repository

This study considers a two-echelon inventory system with one central warehouse and a number of non-identical retailers with Poisson demands, constant lead times, and lost sales for a single item. The warehouse works as a cross-docking terminal with no inventory and coordinates shipments to retailers. We apply the Joint order (1, T) policy in such an inventory system. In the standard (1, T) policy, the warehouse sends one unit of the item to each retailer in a fixed cycle time, which is calculated by considering each retailer separately. In the joint order (1, T) policy, the warehouse decides to replenish one unit of the item for each retailer in a cycle time which is adjusted to be an... 

Hydroxyapatite is the most important bio ceramic, due to its structure and chemical composition which is similar to bone. Since feeble fracture toughness, brittleness and low tensile strength have restricted their use, for overcoming this problem, they were often used as a secondary component. HAp-Al2O3 nano-composite powder combined the benefits of biocompatibility of HAp and high strength of Al2O3. When HAp-Al2O3 nano-composite powders were sintered at a higher temperature than 1100- 1200°C, HAp was decomposed and converted to the second phase of TCP, due to the formation of calcium aluminate increasing decomposition speed of HAp to TCP at higher degree than 1100-1200°C temperatures;... 

Voice activity detection is an important step in some speech processing systems, such as speech recognition, speech enhancement, noise estimation, speech compression ... etc. In this paper a new voice activity detection algorithm based on wavelet transform is proposed. In this algorithm we use the energy in each sub band, and by two methods we extract feature vector from these values. Experimental results demonstrate advantage over different VAD methods. ©2008 IEEE  

In current study, microstructure and high-temperature mechanical properties of ZK60 magnesium alloy reinforced by SiC whiskers were investigated after casting, the KOBO extrusion and aging processes. For this purpose, ZK60/SiCw composite specimens were prepared by stir casting technique. In order to achieve a laminar structure and improve the strength, the samples were subjected to KOBO extrusion technique and precipitation hardening, resulting in improved strength and increased ductility. The former is due to grain refining and formation of precipitates in the microstructure, while the latter is attributed to grain refining and formation of laminar structure. To evaluate the strength of the... 

In this paper, the problem of placing a minimum number of phasor measurement units (PMUs) in a transmission system is considered so that faults on all lines of the network can be diagnosed and located irrespective of their locations. For this purpose, a PMU placement algorithm is applied to calculate the required data for impedance-based fault location of any fault line in the network, achieving the full potential of the circuit laws throughout the system. Another algorithm is then proposed to compute the voltage and current values of the fault line for fault-location purposes. Moreover, as many networks are already equipped with PMUs, the proposed algorithm makes it possible to locate... 

The current study demonstrates homogenous decorating of zinc oxide quantum dots (QDs) onto graphene oxide (GO) surface via simple chemical method. The AFM image exhibited that the prepared graphene was 0.8 nm thick and hence practically monolayer. Average size of the ZnO QDs was estimated by transmission electron microscopy around 3 nm. Instrumental and chemical analyses demonstrated formation of a strong bond between ZnO QDs and GO, through C-O-Zn and C-Zn bridges. The UV-visible spectra displayed that the introduction of graphene sheets to ZnO QDs resulted in higher absorption intensity of UV as well as widening of adsorption window toward visible light for ZnO-Graphene due to chemical... 

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1-nm thickness and good transparency was synthesized using the well-known Hummers's method. Fourier transform infrared and X-ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are... 

Carbon-doped zinc oxide/reduced graphene oxide (C-ZnO/rGO) was prepared by a facile one-pot supercritical methanol method. The synthesized C-ZnO/rGO nanocomposite with flower-like ZnO micro-rods (MRs) synergistically inherited all the advantages of carbon doping and rGO heterojunction and exhibited high photocatalytic activity for the photodegradation of methyl orange (MO) under visible light. The x-ray diffraction (XRD) results indicated that in presence of GO, a new carbon-doped phase was formed at the high temperature and pressure of supercritical methanol. The x-ray photoelectron spectroscopy (XPS) at low binding energies demonstrated that the valence band of C-ZnO-rGO is up-shifted by... 

Hematite is recognized as a promising photoanode for photoelectrochemical water oxidation to produce solar hydrogen due to its favorable properties. However, the high charge carrier recombination rate due to low electrical conductivity and sluggish oxygen reduction kinetics of pure hematite hinder its photocatalytic activity. This work proposed a new hematite-based heterostructure of Ti-Fe2O3/Fe2TiO5/FeOOH, synthesized through a hydrothermal method. The photoanode morphology was branched nanorods that expanded their surface area and improved charge transfer at the photoanode/electrolyte interface. In a novel and complement modification approach, a thin pseudobrookite interlayer was applied... 

This paper deals with the effects of three low-carbon steel filler metals consisting of ferritic and austenitic phases on the weld joints of the tungsten inert gas (TIG) welding of Hardox 500 steel. The correlation between the microstructure and mechanical properties of the weld joints was investigated. For this purpose, macro and microstructure were examined, and then microhardness, tensile, impact, and fracture toughness tests were carried out to analyze the mechanical properties of joints. The results of optical microscopy (OM) images showed that the weld zones (WZ) of all three welds were composed of different ferritic morphologies, including allotriomorphic ferrite, Widmanstätten... 

Microfluidic systems (MFS) provide a range of advantages in biomedical applications, including improved controllability of material characteristics and lower consumption of reagents, energy, time and money. Fabrication of MFS employs various materials, such as glass, silicon, ceramics, paper, and metals such as gold, copper, aluminum, chromium and titanium. In this review, gold thin film microfluidic channels (GTFMFC) are discussed with reference to fabrication methods and their diverse use in chemical and biomedical applications. The advantages of gold thin films (GTF) include flexibility, ease of manufacture, adhesion to polymer surfaces, chemical stability, good electrical conductivity,... 

Twitter sentiment analysis, which often focuses on predicting the polarity of tweets, has attracted increasing attention over the last years, in particular with the rise of deep learning (DL). In this paper, we propose a new task: predicting the predominant sentiment among (first-order) replies to a given tweet. Therefore, we created RETwEET, a large dataset of tweets and replies manually annotated with sentiment labels. As a strong baseline, we propose a two-stage DL-based method: first, we create automatically labeled training data by applying a standard sentiment classifier to tweet replies and aggregating its predictions for each original tweet; our rationale is that individual errors... 

With the passage of time and more advanced societies, there is a greater emergence and incidence of disease and necessity for improved treatments. In this respect, nowadays, aptamers, with their better efficiency at diagnosing and treating diseases than antibodies, are at the center of attention. Here, in this review, we first investigate aptamer function in various fields (such as the detection and remedy of pathogens, modification of nanoparticles, antibiotic delivery and gene delivery). Then, we present aptamer-conjugated nanocomplexes as the main and efficient factor in gene delivery. Finally, we focus on the targeted co-delivery of genes and drugs by nanocomplexes, as a new exciting... 

This study aims to 3D print titanium alloy constructs incorporating gradient of porosities, from the fully dense core to the porous outer surface. Gradient porous specimens were prepared using selective laser melting (SLM). Fully dense specimens fabricated by SLM were used as the control group. Characterization of samples was done using X-ray tomography, uniaxial compression testing, and optical and scanning electron microscopes. The biocompatibility of fabricated samples was investigated using human periodontal ligament stem cells via assessment of cell attachment, viability, and proliferation by direct and indirect assays. The data were analyzed using ANOVA and Tukey’s post hoc test....