Sharif Digital Repository

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

In the present study, the roll bonding behaviour of Al-3003/Al-4043 and Al-3003/Zn sheets were compared. The bi-layer sheets were produced by a roll bonding process at different reductions in thickness and rolling temperatures. The joint strengths of the sheets were evaluated by peel and bend testing before and after supplemental annealing treatment. The peeled surfaces were examined using a scanning electron microscope. The results indicated that the Al-3003/Al-4043 sheets were bonded with higher joint strength and lower threshold reductions in thickness with respect to the Al-3003/Zn sheets. In contrast to the Al-3003/Zn sheets, significant improvement was observed in the joint strength of... 

The influence of thermal cycles on the properties of the coarse grained heat affected zone in X80 microalloyed steel has been investigated. The thermal simulated involved heating the X80 steel specimens to the peak temperature of 1400 °C, with different cooling rates. The four-wire tandem submerged arc welding process, with different heat input values, was used to generate a welded microstructure. The martensite/austenite constituent appeared in the microstructure of the heat affected zone region for all the specimens along the prior-austenite grain boundaries and between the bainitic ferrite laths. The blocky-like and stringer martensite/austenite morphology were observed in the heat... 

The effects of real and Gleeble simulated double pass thermal cycles on the properties of the intercritically reheated coarse grained heat affected zones in X80 microalloyed pipeline steel has been investigated. The Gleeble simulated process involved heating the X80 steel specimens to the first peak temperature of 1400°C and then reheating to the second peak temperature of 800°C, with different cooling rates. The size and area fraction of martensite/austenite (M/A) constituents were obtained by a combination of field emission scanning electron microscopes and image analysis software. In addition, misorientation was characterized by electron back-scatter diffraction analysis. It is clear that... 

The thermal decomposition of Aluminum Titanate in exposure to pure Aluminum was examined both in powder and in bulk form. Optical microscopy, FE-SEM, XRD, DSC and TGA examinations were conducted to take the possible chemical reactions between Aluminum Titanate and Al into consideration. It was found that as Aluminum Titanate particles are exposed to Al matrix, the thermal stability of Aluminum Titanate is degraded and its decomposition temperature is reduced from 850°C to 550°C. Also, the chemical reactions between Aluminum Titanate and Al start along the interfaces, and the reaction products, i.e. Al3Ti, Al2O3, TiO2 and O2 gas are left there. A mechanism was suggested to describe the... 

The effect of milling time on the magnetic properties of FINEMET amorphous ribbons has been investigated using X-ray diffraction, Mössbauer spectroscopy, thermo-magnetic measurements, transmission electron microscopy and SQUID magnetometery. Ribbons were melt-spun at a wheel speed of 38 ms-1 and then mechanically milled for different periods up to 45 min. The results showed that the partially crystallization of the amorphous powder occurs during milling. TEM observations confirmed the formation of small volume fraction of the crystalline phase with ∼9 nm crystallite size in the amorphous matrix for the ribbon milled for 45 min. Thermo-magnetic measurements indicated the enhancement of the... 

Abstract In this study, aluminium titanate (AT) particles and nanofibers were synthesized through citrate sol gel and sol gel-assisted electrospinning methods in both nanostructured powder and nanofiber forms. The results of X-ray diffraction analysis, field-emission scanning electron microscopy and differential thermal analysis showed that the synthetic products benefit a nanostructured nature with a grain size less than 70 nm. The optimal values for time and temperature at which a roughly pure AT is attained were determined as 2 h and 900 C, respectively. It was found that the sol gel precursor bears an amorphous structure till 700 C and begins to be crystallized to alumina, anatase and AT... 

In this paper, we propose two lossless compression techniques that represent a two dimensional Run-length Coding which can achieve high compression ratio. This method works by partitioning the block regions of the input image into rectangles instead of working by runs of adjacent pixels, so it is found to be more efficient than 1D RLE Run-length Coding for transmitting texts and image. In the first method, length and width of consecutive black and white rectangles are transmitted. The idea of this method is new and it can be very effective for some images which have large blocks of black or white pixels. But in the second method only black rectangles are considered in order to transmit and... 

Air passages of an aircraft fuel system are manufactured from 4130 steel tubes brazed using BNi-4 filler metal. It was observed that brazed tubes leak after flying about 100 h. In this case study, microscopy techniques and hardness measurements were employed to identify the root cause of this failure. It was found that wide joint clearance promotes brittle phases at the joint centerline which can act as crack nucleation sites under thermal expansion and misalignment stresses. Based on the obtained results, joint clearance was reduced to optimum value. This reduction prohibited the occurrence of leakage and solved the problem  

In this research, the welding characteristics of a new UHSLA steel, 35NiCrMoV123, have been studied in two general conditions (annealed and quench-tempered). Carbon equivalent value of 35NiCrMoV123 steel is near 0.9 which classifies it as a "very difficult to weld" steel. The effects of welding heat treatment cycle (preheat, interpass, and postheat) on metallurgical and mechanical properties of weldments have been investigated by tensile, impact toughness, and hardness tests, as well as optical microscopy observations. It has been observed that by employing high-temperature stress relief (600 °C), welding could be performed in annealed condition successfully. Also, the results indicate that... 

The objective of this paper is to study the influence of the second peak temperature during real and simulated welding on properties of the subcritically (S), intercritically (IC) and supercritically (SC) reheated coarse grained heat affected (CGHAZ) zones. The X80 high strength pipeline microalloyed steel was subject to processing in a double-pass tandem submerged arc welding process with total heat input of 6.98 kJ/mm and thermal cycles to simulate microstructure of reheated CGHAZ zones. This involved heating to a first peak temperature (TP1) of 1400 °C, then reheating to different second peak temperatures (TP2) of 700, 800 and 900 °C with a constant cooling rate of 3.75 °C/s. Toughness of... 

The nanocrystallization process of amorphous Fe73.5Si13.5B9Nb3Cu 1 was investigated by active screen plasma nitriding (ASPN) treatment at temperatures ranging from 410 °C to 560 °C for 3 h in two gas mixtures of 75% N2-25% H2 and 25% N2-75% H2 at 5 mbar atmosphere. The amorphous ribbons were then annealed under vacuum at the same time and temperatures mentioned above. The structure of the samples was analyzed using various techniques such as X-ray diffraction (XRD), atomic force microscopy (AFM) and differential scanning calorimetry (DSC). Microhardness measurements, electrical resistivity and Vibrating Sample Magnetometer (VSM) were used to study mechanical, electrical and magnetic... 

The comparative study of Active Screen Plasma Nitriding (ASPN) treatment of two Finemet-type alloys with the compositions of Fe73.5Si 13.5B9Nb3Cu1 and Fe 77Si11B9Nb2.4Cu0.6 was investigated in different temperatures ranging from 410°C to 56°C. Differential Scanning Calorimetry (DSC), X-Ray Diffractometery (XRD), Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), electrical resistivity, microhardness measurements and magnetic characterization by a Vibrating Sample Magnetometer (VSM) were utilized to characterize the treated samples. The comparison of the DSC data for the alloys suggested that the smaller amount of Nb as a growth inhibitor shifted the crystallization... 

The electrochemical corrosion behavior of finemet alloy at various heat treatment temperatures was investigated. Thermal behavior and structural changes were studied using differential scanning calorimetry and X-ray diffractometry, respectively. The electrochemical corrosion of amorphous and annealed samples was investigated in 0.10 M NaOH solution using electrochemical impedance spectroscopy and linear sweep voltammetery. Changes in morphology of the samples before and after corrosion were characterized using optical microscope. The results showed that structural relaxation and nanocrystallization during the heat treatment improved corrosion behavior of the alloy. The heat-treated alloy at... 

The influence of particle size and surface modification on sonocatalytic activity of TiO2 nanoparticles was investigated by measuring the degradation efficiency of methyl orange (MO) as a model pollutant. Crystalline TiO2 nanoparticles with different particles and aggregate size were prepared through solution-phase method with varying synthesis temperatures. Coating with polyvinyl alcohol was performed to enhance colloidal stability of the particles over a wide range of pH values (1.5–7.5). Characterization was carried out using X-ray diffraction, high-resolution transmission electron microscopy, dynamic light scattering, and Fourier-transformed infrared techniques. It was found that... 

Mechanical alloying and hot extrusion techniques were employed to produce in-situ fully dens Al-Ti composites without applying any heat treatment. The focus of this study is the investigation of fracture toughness in produced composites in order to improve it and to explain the mechanisms responsible for the fracture. The morphology of milled powders was studied by Scanning Electron Microscopy (SEM). The microstructure of the extruded composites was examined by Optical Microscopy (OM) and Field Emission Scanning Electron Microscopy (FESEM). Moreover, the density and hardness of samples were investigated. Three point bending test of the single edge notched beam (SENB) samples was applied to... 

Finemet bulk soft magnetic alloy was fabricated by spark plasma sintering of the milled ribbons. The amorphous melt-spun ribbons were milled for 36min by high energy vibrational mill and then sieved to separate particles smaller than 125μm. The size distribution of particles was determined by a laser diffraction particle size analyzer. Spark plasma sintering was carried out at super-cooled liquid region for short times of 7 and 21min. The structure of bulk samples was characterized using X-ray diffraction, scanning electron microscopy, differential scanning calorimetry and transmission electron microscopy techniques. The magnetization and coercivity of samples were measured using SQUID... 

The purpose of this work is evaluating the effect of ultra small superparamagnetic iron oxide nanoparticles (USPIONs) coatings on encapsulation efficiency in liposomes and cellular cytotoxicity assay. Moreover, we assessed the effects of surface engineering on the relaxivity of magnetoliposome nanoparticles in order to create a targeted reagent for the intelligent diagnosis of cancers by MRI. For estimating the effect of nanoparticle coatings on encapsulation, several kinds of USPIONs coated by dextran, PEG5000 and citrate were used. All kinds of samples are monodispersed and below 100 ± 10 nm and the coatings of USPIONs have no significant effect on magnetoliposome diameter. The coating of... 

High energy vibratiory mill was used to produce Nanocrystalline Al-20 wt% Ti powders by mechanical alloying. The milled powders were then consolidated by hot extrusion at 530°C. Produced bulk nanocomposite samples were studied by XRD analysis, optical microscopy (OM), Field Emission Scanning Electron Microscopy (FESEM), EDS spectroscopy, densitometry and hardness tests. Three point bending on SENB specimens was applied under quasi static condition to determine the fracture toughness and also investigate the fracture surface using SEM. The results indicated that after extrusion a fully dense Al-Al3Ti nanocomposite with the crystallite size of 200-400 nm is produced in which the Al3Ti...