Sharif Digital Repository

During miscible displacements in fractured porous media, one of the most important factors that plays a significant role in oil production is the matrix-fracture interaction. In this work, a series of hydrocarbon injection experiments have been performed on a fractured glass micromodel that was designed specifically to study matrix-fracture interaction. A high quality image analysis method was used to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that in the case of unit viscosity ratio, the injection rate increased the slope of recovery curve and consequently improved the final... 

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

We present fabrication, characterization, and experimental results describing electrical actuation and readout of the mechanical vibratory response of electrospun ZnO nanofibers. For a fiber with an approximate radius of 200 nm and a length of 70 ìm, a resonance frequency around 3.62 MHz with a quality factor (Q) of about 235 in air at ambient conditions is observed. It is shown that the measured frequency of the resonance is consistent with results from finite element simulations. Also, the measurements were performed in an enclosed chamber with controlled levels of ethanol vapor. The adsorption of ethanol causes a shift in the resonance frequency of the fibers, which can be related to the... 

During any microbial enhanced oil recovery process, both cells and the metabolic products of bacteria govern the tertiary oil recovery efficiency. However, very accurate examination is needed to find the functionality of these tiny creatures at different reservoir conditions. In this regard, the effect of cell structure on ultimate microbial recovery efficiency which is the most dominant mechanism based on the microorganism types (gram-negative or gram-positive) was systematically investigated. At the first stage, possible different active mechanisms using Bacillus stearothermophilus SUCPM#14 strain were tested using specially designed injection protocol, in situ and ex situ core flooding... 

Excitation signal has essential role in speech synthesis filters to produce natural speech. In this study, a new method is proposed for modeling the glottal pulse shape of a speaker. A search is done on the glottal pulse shape space using simulated annealing method. The PESQ measure and Cepstral distance between the original signal and the synthesized signal are used as the cost function. An LPC filter with 10 coefficients is used as the synthesis filter. The PESQ value between the original and synthesized speech using traditional impulse is 2.402. Here, the glottal pulse for a certain speaker is modeled in three different experiments. In the first experiment, the negative PESQ measure is... 

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

This paper proposes four methods for improving the performance of keyword spotting (KWS) systems. Keyword models are usually created by concatenating the phoneme HMMs and garbage models consist of all phonemes HMMs. We present the results of investigations involving the use of skips in states of keyword HMMs and we focus on improving the hit ratio; then for false alarm reduction in KWS we model the words that are similar to keywords and we create HMMs for highly frequent words. These models help to improve the performance of the filler model. Two post-processing steps based on phoneme and word probabilities are used on the results of KWS to reduce the false alarms. We evaluate the... 

In this research, titanium dioxide (TiO2) ultra-thin films have been successfully obtained on lamina-glass substrates by thermal oxidation of DC magnetron sputtered titanium. The as-deposited and the annealed films have been characterized by different techniques. The X-ray diffraction (XRD) results revealed the amorphous structure of as-deposited titanium and anatase crystal structure for the annealed films. The atomic force microscopy (AFM) results showed that increasing the annealing temperature could lead to rougher and larger grain size in the films. Finally, the optical data and band-gap calculations of the films were obtained using the transmittance spectrum, indicating that... 

Inclusion of carbon nanotubes (CNTs) into the titanium dioxide coating on 1050 aluminium alloy was studied with the aim at enhancing the corrosion resistance of the surface. Composite coatings with various contents of CNTs were prepared via the sol-gel method and dip coating. XRD and FTIR phase and structural evaluations showed the presence of anatase phase in all thin films. Concomitant enhanced corrosion behaviour in the presence of CNTs was resulted from polarization potentiodynamic test. Band-gap evaluation was performed using absorbance spectra of coatings and showed considerable decrease of band-gap energy in the presence of CNTs. Photocatalytic properties and hydrophilicity of... 

A dual mode UHF RFID transponder in 0.18 μm CMOS conforming to the EPC Gen 2 standard is presented. Low voltage design of the analog and digital blocks enables the chip to operate with a 1 V regulated voltage and thus to reduce the power consumption. The novel dual mode architecture enables the chip to work in passive and battery-assisted modes controlled by the reader. A custom Gen 2 based command switches the operation mode of the circuit. By using a special clock calibration method the chip operates from 1.2 to 5 MHz clock frequency. Several low power techniques are employed to reduce the power consumption of the chip which is essential in passive RFID tags. Measurement results show that... 

By employing a few simple models of passive dynamic walking mechanism, we have shown the possibility of extending the boundaries of the maximum stable speed of these autonomous robots merely by changing their terrain. The replaced terrain consists of a series of parallel local slopes and is recognized as a general form of a ramp-stair surface. Although here, the mechanism of stabilization of the unstable locomotion patterns is not clearly known, the technique is quite simple and works effectively. The merit to the method over other strategies, could be described in two separate aspects: First, it is still completely passive; so we do not need any external energy to control the robot. Second,... 

This paper presents a new point-to-face contact algorithm for contacts between two polyhedrons with planar boundaries. A new discrete numerical method called three-dimensional discontinuous deformation analysis (3-D DDA) is used and formulations of normal contact submatrices based on the proposed algorithm are derived. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. This approach does not need to use an iterative algorithm in each time step to obtain the contact plane, unlike the ‘Common-Plane’ method applied in the existing 3-D DDA. In the present 3-D DDA method, block contact constraints are enforced using the penalty method.... 

In this paper we present experimental results describing electrical readout of the mechanical vibratory response of graphene-doped fibers by employing electrical actuation. For a fiber resonator with an approximate radius of 850 nm and length of 100 m, we observed a resonance frequency around 580 kHz with a quality factor (Q) of about 2511 in air at ambient conditions. Through the use of finite element simulations, we show that the reported frequency of resonance is relevant. We also show that the resonance frequency of the fiber resonators decreases as the bias potential is increased due to the electrostatic spring-softening effect  

In this paper we present flexible strain sensors made of graphene flakes fabricated, characterized, and analyzed for the electrical actuation and readout of their mechanical vibratory response in strain-sensing applications. For a typical suspended graphene membrane fabricated with an approximate length of 10 μm, a mechanical resonance frequency around 136 MHz with a quality factor (Q) of ∼60 in air under ambient conditions was observed. The applied strain can shift the resonance frequency substantially, which is found to be related to the alteration of physical dimension and the built-in strain in the graphene flake. Strain sensing was performed using both planar and nonplanar surfaces... 

The first results of the movable electrode biasing experiments performed on the IR-T1 tokamak are presented. For this purpose, a movable electrode biasing system was designed, constructed, and installed on the IR-T1 tokamak, and then the positive voltage applied to an electrode inserted inside the tokamak limiter and the plasma current, poloidal and radial components of the magnetic fields, loop voltage, and diamagnetic flux in the absence and presence of the biased electrode were measured. Results compared and discussed  

In this paper fabrication of a 0-3 ceramic/ceramic composite lead zirconate titanate, Pb(Zr0.52Ti0.48)O3 thin film has been presented and then a pressure sensor based on multilayer thin-film PZT diaphragm contain of Lead Zirconate Titanate nanocrystalline powders was designed, modeled and optimized. This multilayer diaphragm in general acts as sensor or actuator. ANSYS was used for simulation of diaphragm. Dynamics characteristics of this multilayer diaphragm have been investigated. By this simulation the effective parameters of the multilayer PZT diaphragm for improving the performance of a pressure sensor in different ranges of pressure are optimized. The optimized thickness ratio of PZT... 

The universal paradigm shift towards green energy has accelerated the development of modern algorithms and technologies, among them converters such as Z-Source Inverters (ZSI) are playing an important role. ZSIs are single-stage inverters which are capable of performing both buck and boost operations through an impedance network that enables the shoot-through state. Despite all advantages, these inverters are associated with the non-minimum phase feature imposing heavy restrictions on their closed-loop response. Moreover, uncertainties such as parameter perturbation, unmodeled dynamics, and load disturbances may degrade their performance or even lead to instability, especially when... 

A new, simple, fast and reliable solid-phase extraction method has been developed for separation/preconcentration of trace amounts of Pb(II) using dithizone/sodium dodecyl sulfate-immobilized on alumina-coated magnetite nanoparticles, and its determination by flame atomic absorption spectrometry (FAAS) and graphite furnace atomic absorption spectrometry (GFAAS) after eluting with 4.0 mol L -1 HNO 3. Optimal experimental conditions including pH, sample volume, eluent concentration and volume, and co-existing ions have been studied and established. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation of Pb(II)... 

This paper presents a general integrated procedure of fabricating a Hybrid Electric Motorcycle (HEM). Firstly, a simple model designed and simulated using ADVISOR2002 and the proposed model is exported to MATLAB/SIMULINK. Secondly, the controller schematic and its optimized control strategy are described. In addition, the ratings of the components including the batteries, electric motor, and internal combustion engine (ICE) are calculated based on the design. A 125 cc ICE motorcycle is selected for conversion to HEM. A brushless DC (BLDC) motor assembled in front wheel as accessory propellant. The nominal powers are 8.2 kW at 8500 rpm and 500 W for the ICE and BLDC respectively. The original... 

Accurate and early detection of anomalies in peripheral white blood cells plays a crucial role in the evaluation of well-being in individuals and the diagnosis and prognosis of hematologic diseases. For example, some blood disorders and immune system-related diseases are diagnosed by the differential count of white blood cells, which is one of the common laboratory tests. Data is one of the most important ingredients in the development and testing of many commercial and successful automatic or semi-automatic systems. To this end, this study introduces a free access dataset of normal peripheral white blood cells called Raabin-WBC containing about 40,000 images of white blood cells and color...