Sharif Digital Repository

The non-paraxial and vectorial effects have an important role in the dynamics of highly confined beam in nonlinear medium. In this paper, we study the vectorial non-paraxial propagation of Gaussian field in the saturable absorber media numerically with the aim of nano-lithography. It is shown that in the optimal regimes for nanolithography, the mutual coupling between components of optical field and mode coupling between different orders of Hermite-Gaussian mode lead to generation of various patterns upon propagation through saturable absorber media. The vectorial effect is responsible for the symmetry breaking. For converging input beam, while the intense part of the beam goes toward the... 

Due to flexibility, relatively small weight and low energy-dissipative characteristics of cables, they are vulnerable to external excitations such as wind, wind-rain, earthquake and traffic loadings. Among them, galloping phenomenon is one of the most important sources of electrical/mechanical failures in power transmission lines. In this paper, tuneable vibration absorbers (TVAs) are used to suppress galloping forced vibrations (as a semi-active control approach). Using mode summation technique, mathematical model of the hybrid problem including the transmission line and an arbitrary number of absorbers is presented. Developing a sophisticated multi-loops optimization algorithm, best values... 

In this paper a saturable absorber medium is employed as an optical limiter to reduce the spot size to the range of several tens of nanometres. The characteristics of a Gaussian beam are theoretically analysed upon propagation through the saturable absorber medium. Based on Maxwell equations a system of coupled nonlinear ordinary differential equations for intensity, beam radius and beam curvature is obtained. Theoretical analyses and numerical results show that the behaviour of a Gaussian beam in a saturable absorber medium strongly depends on the initial characteristics of the laser beam. Numerical results indicate that, depending on the initial conditions and a suitable saturable absorber... 

In this paper by solving Dirac equation, we present an analytical solution to calculate energy levels and wave functions of mono- and bilayer graphene quantum dots. By supposing circular quantum dots, we solve Dirac equation and obtain energy levels and band gap with relations in a new closed and practical form. The energy levels are correlated with a radial quantum number and radius of quantum dots. In addition to monolayer quantum dots, AA- and AB-stacked bilayer quantum dots are investigated and their energy levels and band gap are calculated as well. Also, we analyze the influence of the quantum dots size on their energy spectrum. It can be observed that the band gap decreases as quantum... 

In the present study, we attempt to synthesize and characterize novel CMC-g-poly (acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid)/silica gel composite. Infrared spectroscopy and TGA thermal analysis were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy. The effect of reaction variables affecting on water absorbency of the composite and swelling behavior in various solvents, salt, and pH solutions was investigated. Maximum water absorbency of the optimized final product was found to be 4000 g/g in distilled water. The absorbency under load (AUL) of the hydrogel was also determined by... 

Dynamic vibration absorbers are used to reduce the undesirable vibrations in many applications such as electrical transmission lines, helicopters, gas turbines, engines, bridges and etc. One type of these absorbers is tunable vibration absorber (TVA) which can act as a semi-active controller. In this paper, by applying a (TVA), chatter vibration is suppressed during boring process in which boring bar is modeled as a cantilever Euler-Bernoulli beam. The optimum specifications of absorber such as spring stiffness, absorber mass and its position can be determined by developing an algorithm based upon mode summation method. Finally, using the SIMULINK Toolbox of MATLAB, the analog simulated... 

The absorption characteristics of zirconium nitride (ZrN)-based metamaterial absorber of fractal geometry are studied. The proposed absorber is comprised of fractal metasurface at the top having subwavelength-sized periodic pattern of specially designed ZrN circular nano-discs arranged over silicon dioxide (SiO2) substrate. A tri-layer graphene, owing to its exhibiting better tunability, is introduced at the interface of metasurface and substrate. The bottom side of SiO2 is coated with silver nanolayer to block transmission. The absorptivity essentially depends on the kind of fractal design used in metasurface to configure the absorber. The obtained results exhibit the absorption... 

Multiband absorption is the interest of the microwave communities due to several applications in sensing, filtering, and stealth. Usually, the stacking of metal and dielectric multilayered structures form a multiband absorber which makes the device bulky and costly. In this paper, we investigate a multiband absorber based on a single-layered fractal metasurface for the 5G applications. The unit cell of the fractal metasurface is comprised of six ring-shaped symmetric split-ring resonators (SRRs) connected back-to-back with each other. The absorptivity is investigated in the 5G microwave regime (22–36 GHz) for various obliquities at different substrate thicknesses. Simulation results show... 

In this study, a nonlinear absorber that works with a negative stiffness mechanism is suggested to mitigate vibration, and its effect on the reduction of vibration is investigated. The negative stiffness, which is inherently nonlinear, creates internal resonance; therefore, the vibration energy can be transmitted from low-frequency to high-frequency vibrating modes, causing vibration suppression. The nonlinear absorber is added to the primary nonlinear system, and when the main system is subjected to external resonance due to harmonic excitation, the negative stiffness parameter of absorber is so adjusted that autoparametric resonance occurs and vibration is reduced. First, the mathematical... 

Bolometric response and noise characteristics of YBCO superconductor transition edge IR detectors with relatively sharp transition and its resulting detectivity are investigated both theoretically and experimentally. The magnitude of response of a fabricated device was obtained for different bias currents and modulation frequencies. Also dependency of intrinsic noise of the device on the bias current in the vicinity of critical temperature was studied for various values of chopping frequencies. Using the measured and calculated bolometric response and noise characteristics, we found and analyzed the device detectivity versus frequency for different bias currents. The detectivity versus... 

This article describes the synthesis and swelling behavior of a superabsorbing hydrogel based on sodium alginate (NaAlg) and polyacrylonitrile (PAN). The physical mixture of NaAlg and PAN was hydrolyzed with a solution of NaOH to yield an alginate-poly(sodium acrylate-co-acrylamide) [Alg-poly(NaAA-co-AAm)] superabsorbent hydrogel. A proposed mechanism for hydrogel formation was suggested, and the structure of the product was established with Fourier transform infrared spectroscopy. The effects of reaction variables were systematically optimized to achieve a hydrogel with a swelling capacity as high as possible. Under the optimized conditions concluded, the maximum capacity of swelling in... 

Peripheral milling is extensively used in manufacturing processes, especially in aerospace industries where end mills are used for milling of wing parts and engine components. The generation of complex shapes with high quality for various types of materials is the main advantage of milling in contrast to other machining processes. During the milling process, the occurrence of self-excited vibrations or chatter may cause reduction in material removal rate (MRR), damage to the tool and spindle bearing or may result in poor dimensional accuracy and surface finish of the work-piece. In this paper, milling process is modeled as two degrees of freedom (2DOF) system in which the tool wear and... 

Dynamic vibration absorbers are used as semi-active controllers to reduce the undesirable vibrations in many applications such as electrical transmission lines, helicopters, gas turbines, engines, bridges and etc. One type of these absorbers is tunable vibration absorber (TVA). In this paper, regenerative chatter in an orthogonal turning process is suppressed using a (TVA). It is shown that TVA can modify the frequency response function of the cutting tool so as to improve cutting stability in turning process. In addition, tool wear is an important factor which works as a positive damping and helps the chatter suppression beside exertion of the TVA. Finally, using the SIMULINK Toolbox of... 

Dynamic vibration absorbers are used as semi-active controllers to reduce the undesirable vibrations in many applications such as electrical transmission lines, helicopters, gas turbines, engines, bridges and etc. One type of these absorbers is tunable vibration absorber (TVA). In this paper, regenerative chatter in an orthogonal turning process is suppressed using a (TVA). It is shown that TVA can modify the frequency response function of the cutting tool so as to improve cutting stability in turning process. In addition, tool wear is an important factor which works as a positive damping and helps the chatter suppression beside exertion of the TVA. Finally, using the SIMULINK Toolbox of... 

A method for reducing radar cross-section (RCS) of the slot array antenna by utilising the radar absorbing material, while preserving the radiation performance simultaneously, is proposed and discussed. The scheme is based on the implementation of the multilayer frequency selective surface-radar-absorbing material (RAM) capable of operation over a wide frequency band. The use of radar absorbing material on an antenna’s radiation screen causes a change in surface current, resulting in the radiation pattern of the antenna. Therefore, by designing the coating pattern of the radar absorbent material as a substrate and a capacitive patch as a unit cell on the antenna board, the reduction of 19 dB...