Sharif Digital Repository

We implement an optical tweezers technique to assess the effects of chemical agents on single bacterial cells. As a proof of principle, the viability of a trapped Escherichia coli bacterium is determined by monitoring its flagellar motility in the presence of varying concentrations of ethyl alcohol. We show that the “killing time” of the bacterium can be effectively identified from the correlation statistics of the positional time series recorded from the trap, while direct quantification from the time series or associated power spectra is intractable. Our results, which minimize the lethal effects of bacterial photodamage, are consistent with previous reports of ethanol toxicity that used... 

The bioconversion of abundant and renewable cellulosic biomass into ethanol as an alternative to petroleum is gaining importance due to the realization of diminishing natural oil and gas resources. Agricultural and foresty plant residues are an abundant and renewable source of sugar substrates that could be fermented to ethanol. A thermochemical treatment of biomass in which both cellulose and hemicellulose are hydrolyzed to soluble sugar is necessary before yeast fermentation. After thermochemical treatment, cellulase enzymes must be introduced in the system to hydrolyze any remaining cellulose. The simultaneous saccharification and fermentation (SSF), is a method which converts... 

The clarification of rough non-alcoholic beer (RNAB) and diluted malt extract (DME) was investigated in a pilot plant consisting of a tubular ceramic membrane with nominal pore diameter of 0.45μm. The results of the primary experiments show that the concentration of suspended particles in the RNAB (∼0.05kg/m3) and DME (∼0.2kg/m3) correlates proportionally to turbidity (in NTU) with the factor of 4.45×10-4 (kgm-3NTU-1). During cross-flow microfiltration (CFMF), flux declined drastically with time due to fouling mechanisms and propensity. According to the characterizing curve of log(d2t/dV2) versus log(dt/dV), fouling is initiated by penetration of aggregates through the membrane surface,... 

Two new silver(I) complexes ((tptz)Ag2(NO3) 2 and [Ag5(tptz)4](NO3)5) with 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) have been synthesized and characterized by X-ray diffraction, elemental analysis, 1H NMR, IR, fluorescence, UV-Vis spectroscopy and electrochemistry. Oxidation of alcohols to their corresponding aldehydes and ketones was conducted with one of the Ag complexes as a catalyst, soluble enough in organic solvent, using oxone (2KHSO5·KHSO4·K2SO4) as an oxidant under biphasic reaction conditions (CH2Cl 2/H2O) and tetra-n-butylammonium bromide as phase transfer agent under air at room temperature  

The present article deals with super-swelling behavior of crosslinked homopolymer of 2-acrylamido-2-methylpropane sulfonic acid, poly(AMPS), in binary mixtures of dimethyl sulfoxide (DMSO) and various polar solvents including water, mono-, and polyhydric alcohols, and amide solvents such as N-methyl pyrrolidone. Extraordinary phase transition sequences including a new unusual swelling phenomenon, referred to as "overentrant" swelling, was observed for this polymeric organogel in the solvent/DMSO mixtures. The swelling behaviors were preliminarily explained based on the major interactions involved in the solvation process and dielectric constant of the swelling media. It was established that... 

Some cis-dioxomolybdenum (VI) complexes with tridentate Schiff base ligands derived from salicylaldehyde and aminophenols, aminoalcohol or o-aminobenzenethiol were examined as catalysts for epoxidation of different aliphatic and aromatic olefins, with tert-butyl hydroperoxide as oxidant. All complexes exhibited high activity and selectivity for epoxidation of aliphatic substrates during a short time period (95% conversion of cyclooctene after 30 min). The epoxide yield increased with the nucleophilic character of olefin. The catalysts activation strongly depends on the reaction temperature and nature of the solvent. Epoxidation of olefins by these catalysts is inhibited by ligands or... 

Magnetite (Fe3O4) nanostructures with different morphologies including uniform nanoparticles, magnetic beads and nanorods were synthesized via a co-precipitation method. The synthesis process was performed at various temperatures in the presence of polyvinyl alcohol (PVA) at different concentrations. It is shown that small amounts of PVA act as a template in hot water (70 °C), leading to the oriented growth of Fe3O4 nanorods, which was confirmed by selected area electron diffraction. Individually coated magnetite nanoparticles and magnetic beads were formed at a relatively lower temperature of 30 °C in the folded polymer molecules due to the thermo-physical properties of PVA. When a moderate... 

A manganese(II) complex of 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) has been synthesized and characterized by single-crystal X-ray diffraction, elemental analyses, IR, and UV-Vis spectroscopic techniques. Oxidation of alcohols to their corresponding aldehydes and ketones was conducted by this catalyst using oxone (2KHSO5KH-SO4K2SO4) as an oxidant under biphasic reaction conditions (CH2Cl2/H 2O) and tetra-n-butylammonium bromide as phase transfer agent under air at room temperature. Easy preparation, mild reaction conditions, high yields of the products, short reaction times, no further oxidation to the corresponding carboxylic acids, high selectivity and inexpensive reagents make this... 

Charge-transfer (CT) complexes formed from the reactions of 4-nitropyrocatechol (4-nCat) as an electron acceptor with four amino alcohols: 2-aminoethanol, 1-amino-2-propanol, 4-aminobutanol and N-(2-hydroxyethyl)-1,3-diaminopropane (NHEDAP) as electron donors, have been studied spectrophotometrically in H2O and H2O/EtOH at 20, 25, 30, 35 and 40 °C. The calculated values of the oscillator strength and transition moment confirm the formation of CT-complexes. The thermodynamic and spectroscopic parameters were also evaluated for the formation of CT-complexes. The equilibrium constants ranged from 9.00 to 2.20 l mol-1 (M-1). These interactions are exothermic and have relatively large standard... 

In the present work, numerical simulation of cross flow microfiltration of non-alcoholic beer in a tubular membrane has been studied theoretically and verified experimentally. Finite element method was used as a powerful tool for simulation. The feed stream, which flows mainly tangentially to the porous membrane surface, is modeled by the Navier-Stokes equations whereas the porous wall conditions are described by the Darcy equation that relates the pressure gradient within a flow stream to the flow rate through the permeable wall. A new model that considers transient behavior of the membrane due to fouling was used to estimate the permeate flux reduction. A pilot-scale cross flow membrane... 

Despite numerous experimental studies, there is a lack of fundamental understanding on how the chemical composition of a co-solvent at different wettability conditions might affect the pore-scale events and oil recovery efficiency in 5-spot models. In this study visualization of solvent injection experiments performed on a one-quarter five spot glass micromodel, which was initially saturated with the crude oil. One hydrocarbon solvent was considered as base, and four other groups of commercial chemicals, as well as their mixtures, were used as co-solvents. Microscopic and macroscopic displacement efficiency of solvent mixtures in both strongly water-wet and oil-wet media has been studied. It... 

Superparamagnetic iron oxide nanoparticles (SPIONs) are increasingly used in medical applications, such as targeting delivery and imaging. In the future, patients are more likely to be exposed to pharmaceutical products containing such particles. The study of toxicity of SPIONs has become of great importance in recent years, although the published data in this arena is limited. The aim of the present work is to investigate the cytotoxicity of SPIONs and the effect of the particles on the cell medium components. For this purpose, uncoated and polyvinyl alcohol (PVA) coated SPIONs with narrow size distribution were synthesized via a well-known coprecipitation method. The mouse fibroblast cell... 

In this study, a fast and sensitive flow injection μ-solid phase extraction (FI-μ-SPE) technique based on an electrospun polyaniline (PANI) nanocomposite in conjunction with gas chromatography-mass spectrometry (GC-MS) was developed. The PANI-based nanocomposite was synthesized by electrospinning of a solution containing polyvinyl alcohol (PVA)/PANI. The majority of PVA template was subsequently removed from the whole PVA/PANI nanofibers blend by exposing the electrospun nanocomposite to hot water. The homogeneity, porosity and characterization of the electrospun nanofibers were investigated by the scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Due to... 

The influence of particle size and surface modification on sonocatalytic activity of TiO2 nanoparticles was investigated by measuring the degradation efficiency of methyl orange (MO) as a model pollutant. Crystalline TiO2 nanoparticles with different particles and aggregate size were prepared through solution-phase method with varying synthesis temperatures. Coating with polyvinyl alcohol was performed to enhance colloidal stability of the particles over a wide range of pH values (1.5–7.5). Characterization was carried out using X-ray diffraction, high-resolution transmission electron microscopy, dynamic light scattering, and Fourier-transformed infrared techniques. It was found that... 

Recently, biodegradable polymers such as starch based blends have been well renowned in the biomedical field. Studies have considered them suitable for bone scaffolds, bone cements, tissue engineering scaffolds, drug delivery systems and hydrogels. The aim of this study was to synthesize nanocomposite biomaterial consisting a blend of thermoplastic starch and ethylene vinyl alcohol as the polymer matrix, and nano-structured forsterite as the ceramic reinforcing phase for bone tissue engineering applications. Furthermore, vitamin E was applied as a thermal stabilizer during melt compounding. Extrusion and injection molding were incorporated for melt blending and shaping of samples,... 

Magnetic polyvinyl alcohol (M-PVA) films were prepared via solution casting filled with surface modified superparamagnetic nanoparticles (M-NPs). The M-NPs were coated with citric acid during synthesis. The chemical interaction between the citric acid and M-NPs was confirmed by Fourier transform infrared spectroscopy (FTIR). The average hydrodynamic diameter of M-NPs was 19.7 nm measured by dynamic light scattering DLS and appeared almost spherical in scanning electron microscopy (SEM). The M-NPs were uniformly dispersed in polyvinyl alcohol (PVA) matrix and showed high optical transparency with good mechanical properties. M-PVA hydrogels were synthesized using gamma irradiation. The... 

In this study, a fast and sensitive flow injection μ-solid phase extraction (FI-μ-SPE) technique based on an electrospun polyaniline (PANI) nanocomposite in conjunction with gas chromatography-mass spectrometry (GC-MS) was developed. The PANI-based nanocomposite was synthesized by electrospinning of a solution containing polyvinyl alcohol (PVA)/PANI. The majority of PVA template was subsequently removed from the whole PVA/PANI nanofibers blend by exposing the electrospun nanocomposite to hot water. The homogeneity, porosity and characterization of the electrospun nanofibers were investigated by the scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Due to... 

A heterogeneous recoverable catalyst was prepared via the complexation of palladium onto the surface of magnetic nanoparticles coated by a poly(1-vinyl imidazole) brush. The stable, active and reusable catalyst was proven to be highly active in aerobic oxidation of primary and secondary alcohols with excellent yields. Only 0.1 mol% of the catalyst was used to oxidize 1 mmol of primary and secondary alcohols. The catalyst was readily recovered and reused up to 10 times under the described reaction conditions without significant loss of activity  

In this paper, nano/microstructured-conducting polypyrrole has been prepared on Cu/Au interdigital electrode surfaces by using constant potential amperometry technique. The Fe(II) ions were used as catalyst and X = ClO4 -, pTs-, Cl-, TCA-, DS-, DBS- was implemented as anion dopants. The morphologies of the films were investigated by field emission scanning electron microscope. A remarkable dependence was observed between the type of anion dopant and the morphology of polypyrrole (PPy). The sensing behavior of the PPy-X sensor has been studied toward acetone, methanol, ethanol, 1-propanol, 2-propanol, nitromethane, propylamine, pyridine, and gas mixtures of aliphatic alcohols. The responses... 

The behaviour of solvatochromic absorbance probes (4-nitroaniline, 4-nitroanisole, and Reichardt's dye) within binary mixtures of polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (Triton X-100 or TX-100)/organic solvents (2-propanol, hexanol, butyl acetate, THF, toluene, and p-xylene) was extensively explored by using solvatochromism and the quantum theory of atoms in molecules (QTAIM). To be more precise, the polarity parameters, ET N, and Kamlet-Taft parameters, such as the hydrogen bond donor ability (HBD) (α), hydrogen bond acceptor ability (HBA) (β), and dipolarity/polarizability (π∗), have been investigated in selected mixtures at 298 K. All binary mixtures exhibit complex...