Sharif Digital Repository

This paper develops a stochastic geometry-based approach for the modeling and analysis of finite millimeter wave (mmWave) wireless networks where a random number of transmitters and receivers are randomly located inside a finite region. We consider a selection strategy to serve a reference receiver by the transmitter providing the maximum average received power among all transmitters. In our system model, we employ the unique features of mmWave communications such as directional transmit and receive beamforming and different channels for line-of-sight (LOS) and non-line-of-sight (NLOS) links. Accordingly, deploying a blockage process suitable for mmWave networks, we study the coverage... 

A fast statistical method for the analysis of the Read SNM of a 6 T SRAM cell in near/subthreshold region is proposed. The method is based on the nonlinear behavior of the cell. DIBL and body effects are thoroughly considered in the derivation of an accurate closed form solution for the Read Static Noise Margin (SNM) of the near/subthreshold SRAM cell. This method uses the state space equation to derive the Read SNM of the cell as a function of threshold voltage of cell transistors. This function shows the dependency of the Read SNM on sizing, VDD, temperature, and threshold voltage variations. It provides a fast reliability analysis for a cell array of a given size and a supply voltage. It... 

Clay liners are widely used as porous membrane barriers to control solute transport and to prevent the leakage of leachate both in horizontal and vertical flow scenarios, such as the isolated base and ramps of sanitary landfills. Despite the primary importance of saturated hydraulic conductivity in a reliable simulation of fluid flow through clay barriers, there is no model to predict hydraulic conductivity of clayey soils permeated with saline aqueous solutions because most of the current models were developed for pure water. Therefore, the main motivation behind this study is to derive semi-empirical models for simulating the hydraulic conductivity of clayey soils in the presence of... 

A rather new semi-analytical method towards investigating the free vibration analysis of generally laminated composite beam (LCB) with a delamination is presented. For the first time the combined effects of material couplings (bending-tension, bending-twist, and tension-twist couplings) with the effects of shear deformation, rotary inertia and Poisson's effect are taken into account. The semi-analytical solution for the natural frequencies and mode shapes are presented by incorporating the constraint conditions using the method of Lagrange multipliers. To verify the validity and the accuracy of the obtained results, they were compared with the results from other available references. Very... 

This paper analyzes the second-order mode of the spoof surface plasmon (SSP) waveguide, which consists of PEC pillars (dominos) with finite lateral widths on a PEC ground. The space is first divided into four regions. The electromagnetic fields of each region are then written as TE and TM. The boundary conditions and matching integrals are employed to determine the dispersion relations of the second-order mode of the SSP waveguide consisting of two relations. Inspired by Marcatili's method, the analytical approach is to develop a recently-used method for the first mode of the SSP waveguide. The dispersion relations are then solved; therefore, the dispersion curve is plotted. The analytical... 

Three-dimensional thermo-mechanical stress analysis of composite joints with bi-adhesive bonding is presented using the full layerwise theory. Based on three-dimensional elasticity theory, sets of fully coupled governing differential equations are derived using the principle of minimum total potential energy and are simultaneously solved using the state space approach. Results show that bi-adhesive bonding substantially relieves the edge effects. Moreover, series of parametric studies reveal the nonlinear effects of bonding length ratio and the relative stiffness and coefficient of thermal expansion of the mid- and side-adhesives. It is also concluded that the optimum design of a bi-adhesive... 

With the current focus on energy and the environment, efficient integration of renewable energies, especially solar energy into power systems, is becoming indispensable. Moreover, to fully capture solar potentials and to recognize the unique characteristics associated with solar energy in power systems reliability assessment, a profound investigation is needed. Accordingly, this paper attempts to establish a comprehensive analytical approach for modeling the reliability of a hybrid system (Photovoltaic (PV) system with Energy Storage System (ESS)). To this end, the output of the PV system is modeled by a multi-state model, and the ESS system is modeled as a two-state Markov model. Moreover,... 

Resistance spot welding was used to join austenitic stainless steel sheets. Mechanical properties of the spot welds were evaluated using tensile shear test. Mechanical behaviour was described by peak load, failure energy and failure mode. The relationship between weld fusion zone attributes and failure behaviour was studied. Generally, it was observed that increasing fusion zone size is accompanied by an increase in load carrying capacity and energy absorption capability. However, when expulsion occurs, despite almost constant weld fusion zone size, energy absorption capability reduces significantly due to increase in electrode indentation depth. Considering the failure location and failure... 

Wound-Rotor (WR) resolvers are the most widely used position sensors in applications with harsh environmental conditions. However, their performance is exposed to failure due to high risk of short circuit (SC) fault. Although the output current of the resolver is negligible, its thin copper wires increases the probability of the short circuit fault. To avoid the propagation of the turn-to turn SC fault to the whole coil and undesirable performance of the motion control drive, it is necessary to diagnose it at the very beginning of its development. Meanwhile, the first step of diagnosing faults is their modeling. Time stepping finite element analysis is the most accurate, but computationally... 

Inserting the distal locking screws is a challenging step of the intramedullary nailing procedures due to the nail deformation that makes the proximally mounted targeting systems ineffective. A pre-planning methodology is proposed, based on an analytical model of the nail–bone construct, to predict the nail deformation during surgery using orthogonal preoperative radiographs. Each of the femoral shaft and the nail was modeled as a curved tubular Euler–Bernoulli beam. The unknown positions and forces of the nail–bone interaction were found using a systematic trial and error approach, which minimized the total strain energy of the system while satisfying the force and geometrical constraints.... 

In this study, the thermal cycles and the grain structure in the weld heat-affected zone (HAZ) are predicted. At the first stage, a combined heat transfer and fluid flow model is employed to assess the temperature fields during and after welding of 304 stainless steel and then, the evolution of grain structure is conducted using the predicted temperature distribution and an analytical model of grain growth. The grain sizes of the CGHAZ (coarse grain heat affected zone) achieved from the model are basically in agreement with those obtained from experimental measurement under different heat inputs in the range of 0.33-1.07 MJ/m. Both the experimental data and the calculated results show that... 

End-to-end delay, throughput, energy consumption, and silicon area are the most important design metrics of networks-on-chip (NoCs). Although several analytical models have been previously proposed for predicting such metrics in NoCs, very few of them consider the effect of message waiting time in the buffers of network routers for predicting overall power consumptions and none of them consider structural heterogeneity of network routers. This paper introduces two inter-related analytical models to compute message latency and power consumption of NoCs with arbitrary topology, buffering structure, and routing algorithm. Buffer allocation scheme defines the buffering space for each individual... 

End-to-end delay, throughput, energy consumption, and silicon area are the most important design metrics of networks-on-chip (NoCs). Although several analytical models have been previously proposed for predicting such metrics in NoCs, very few of them consider the effect of message waiting time in the buffers of network routers for predicting overall power consumptions and none of them consider structural heterogeneity of network routers. This paper introduces two inter-related analytical models to compute message latency and power consumption of NoCs with arbitrary topology, buffering structure, and routing algorithm. Buffer allocation scheme defines the buffering space for each individual... 

Particle capture at porous media in cross-flow microfiltration is studied to investigate permeability reduction as a function of membrane pore size and particle size distribution. A new model in pore scale and its pertinent mathematical expressions, which consider pore and particle size distribution, are provided. Permeability reduction of the membrane because of size exclusion during particulate suspension flow was predicted using the developed model. It is assumed that the size exclusion is the dominant mechanism of particle retention causes pore blocking and permeability reduction in the porous media.The exact analytical solution of the stochastic model for size exclusion is used to... 

Particle capture at porous media in cross-flow microfiltration is studied to investigate permeability reduction as a function of membrane pore size and particle size distribution. A new model in pore scale and its pertinent mathematical expressions, which consider pore and particle size distribution, are provided. Permeability reduction of the membrane because of size exclusion during particulate suspension flow was predicted using the developed model. It is assumed that the size exclusion is the dominant mechanism of particle retention causes pore blocking and permeability reduction in the porous media.The exact analytical solution of the stochastic model for size exclusion is used to... 

We consider a single-processor firm real-time (FRT) system with exponential interarrival and execution times for jobs with relative deadlines following a general distribution. The scheduling policy of the system is first-come first-served (FCFS) and the capacity of the system is arbitrary. This system is subject to an arbitrary-shaped time/utility function (TUF), which determines the accrued utility of each job according to its completion time. It is considered that the system power consumption at different working states is predetermined for each processor speed. We have proposed an exact analytical method for the calculation of specific performance and power-related measures of the system.... 

This paper aims to study the behavior of UPVC-confined columns reinforced with polypropylene fibers under axial compression. A sum of 42 column specimens has been tested, including 18 Unconfined Concrete Cylinders (UCC) and 24 confined Concrete-Filled UPVC Tube (CFUT) specimens. To investigate the sensitivity of these columns to various parameters, different levels of material volumes have been used, which include two concrete strengths of 40 and 50 MPa, two tube grades of PN6 and PN10, and three polypropylene fiber content of 0, 1 and 3 kg/m3 of the concrete mixture. The influence of each variable on the ultimate strength, ductility and confinement effectiveness of the specimens have been... 

Traffic pattern is a point of concern in today's modeling approach of network-based computing systems including NoCs and Clusters. Hypermesh is a promising network topology suitable for a range of networks. Although there are few models reported for hypermeshes with uniform traffic pattern, no analytical model has been reported yet that deal with hotspot traffic load. Since uniform traffic assumption is not always justifiable in practice as there are many parallel applications that exhibit non-uniform traffic patterns, which can produce hotspots in the network, in this study we propose a novel analytical model to analyze the mean message latency in wormhole-switched hypermesh in the presence... 

In many wireless sensor network applications, nodes are mobile, while many protocols proposed for these networks assume a static network. Thus, it is important to evaluate if a traditional protocol designed for a static network can tolerate different levels of mobility. This paper provides an analytic model to investigate the effect of mobility on a well-known cluster-based protocol, LEACH. The model evaluates data loss after construction of the clusters due to node mobility, which can be used to estimate a proper update interval to balance the energy and data loss ratio. Thus, the results can help the network designer to adjust the topology update interval given a value of acceptable data... 

In many wireless sensor network applications, nodes are mobile, while many protocols proposed for these networks assume a static network. Thus, it is important to evaluate if a traditional protocol designed for a static network can tolerate different levels of mobility. This paper provides an analytic model to investigate the effect of mobility on a well-known cluster-based protocol, LEACH. The model evaluates data loss after construction of the clusters due to node mobility, which can be used to estimate a proper update interval to balance the energy and data loss ratio. Thus, the results can help the network designer to adjust the topology update interval given a value of acceptable data...