Sharif Digital Repository

Vertically aligned multi-wall carbon nanotube (CNT) arrays were fabricated in tip-growth mode on Ni/Si substrates using plasma enhanced chemical vapor deposition. In a purification process including hydrogenation and acid washing of the Ni/CNTs, the oxygen-containing functional groups were substantially reduced and a wide hollow core at the tip of the CNTs was formed by removing the Ni seeds. Sol-gel silver nanoparticles were deposited on the surface of the unpurified Ni/CNTs, while they could also be embedded within the hollow core of the Ni-removed CNTs. The persistency of the silver ions in the Ni-removed Ag-CNTs in comparison to the release of the silver ions from the Ag-Ni/CNTs in a... 

Carbon nanotube (CNT)-doped TiO2 thin films with various CNT contents were synthesized by sol-gel method for visible light photoinactivation of Escherichia coli bacteria. Post annealing of the CNT-doped TiO2 thin films at 450 °C resulted in anatase TiO2 and formation of Ti-C and Ti-O-C carbonaceous bonds in the film. By increasing the CNT content, the thin films could further inactivate the bacteria in the dark. Meanwhile, as the CNT content increased from zero to 40 wt% the effective optical band gap energy of the CNT-doped TiO2 thin films annealed at 450 °C decreased from 3.2-3.3 to less than ∼2.8 eV providing light absorption in the visible region. Concerning this, visible light... 

Graphene oxide platelets synthesized by using a chemical exfoliation method were deposited on anatase TiO2 thin films. Postannealing of the graphene oxide/TiO2 thin films at 400 °C in air resulted in partial formation of a Ti-C bond between the platelets and their beneath thin film. By using atomic force microscopy and X-ray photoelectron spectroscopy analyses, UV-visible light-induced photocatalytic reduction of the graphene oxide platelets of the annealed graphene oxide/TiO2. thin films immersed in ethanol was studied for the different irradiation times. After 4 h of photocatalytic reduction, the vertical space between the platelets decreased from about 1.1 to less than 0.8 nm and the... 

Fe3O4 magnetic nanoparticles (MNPs) were prepared by co-precipitation method. The nanoparticles were silica coated using TEOS, and then modified by the polymeric layers of polypropylene glycol (PPG) and polyethylene glycol (PEG). Finally, the core-shell samples were decorated with Ag, Au, and Cu nanoparticles. The products were characterized by vibrating sample magnetometry (VSM), TGA, SEM, XRD, and FTIR methods. The antibacterial activity of the prepared samples was evaluated in inactivation of E. coli and S. aureus microorganisms, representing the Gram-negative and Gram-positive species, respectively. The effect of solid dosage, bacteria concentration and type of polymeric modifier on the... 

A composite coating containing silver, fluoride and hydroxyapatite (Ag-FHA) was developed on titanium substrate by sol-gel method. Triethylphosphite, hydrated calcium nitrate, ammonium fluoride and silver nitrate were used respectively, as P, Ca, F and Ag precursors with a Ca:P ratio 1.67 and concentration of silver was 0.3 wt%. Coatings were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and atomic absorption spectrometry (AAS). Potentiodynamic polarization measurements in simulated body fluid proved corrosion protection caused by both Ag-FHA coatings. Antibacterial activity of coatings against... 

A long-term antibacterial activity of implants without compromising their biocompatibility is highly desirable to minimize the biomaterial-associated infections. Although tantalum oxide nanotubes (Ta2O5 NTs) are promising coating materials for orthodontics and orthopedics applications, their insufficient antibacterial activity retains vulnerability to post-implantation infections. This study aimed to endow antibacterial characteristics to the Ta2O5 NTs-coated Ti6Al4V substrates by decoration of silver oxide nanoparticles (Ag2O NPs). The well-adherent Ta2O5 NTs were grown via anodization of a pure tantalum (Ta) layer coated by physical vapor deposition (PVD) on the Ti6Al4V substrates. The... 

The nanotubular arrays of titanium dioxide (TiO2 NTs) have recently received considerable interest for fabrication of dental and orthopedic implants. However, their antibacterial activity requires substantial improvement for the potential infections minimization, without compromise of their biocompatibility. In this work, TiO2 NTs were developed on Ti6Al4V substrates via anodization at a constant potential of 60 V for 60 min, followed by heat treatment at 500 °C for 90 min. Physical vapor deposition (PVD) was further employed to decorate silver oxide nanoparticles (Ag2O NPs) on the nanotubular edges. The results indicated that the highly-ordered TiO2 NTs with decorated Ag2O NPs could promote... 

Titanium dioxide is prepared by sol gel method from titanium tetraisopropoxide (TTIP) as precursor and likewise zinc oxide is prepared by sol gel method from zinc acetate dehydrate (ZAD) as precursor. The composite sols are prepared in three different molar ratios 90TiO2:10ZnO, 70TiO2:30ZnO and 50TiO2:50ZnO. Thin film deposition is carried out by dip coating technique. Crystal structure, surface morphology and photocatalytic activity of the prepared nanocomposite thin films are investigated. The antibacterial activity of the prepared nanocomposite thin film against E-coli ATCC 25922 bacteria is examined by placing the thin film in standard aqueous E-coli medium under UV light for 1, 2, 3 and... 

Silver nanoparticles (NPs) stored in pore-arrays (pa) SU-8 photoresist layer were utilized as an antibacterial nanocomposition against E. coli bacteria. The pa-SU-8 matrix was fabricated by an optical interference lithography method resulting in small pores with a diameter of ∼50 nm and a depth of ∼100 nm. The Ag NPs were deposited on the soft polymeric matrix at different drying temperatures of 50 and 90 °C. X-ray photoelectron spectroscopy showed that the deposited silver NPs were substantially in the metallic state, independent from the drying condition. However, the concentration of the immobilized Ag NPs on the film surface increased (by a factor of 2.5) at the higher drying... 

In this work, aligned and compact Ag nanorods capped by sol-gel mesoporous TiO2 layer were grown on Ti/Si(100) in order to be applied in antibacterial applications. The Ag nanorods with a high effective surface were grown by applying an electric field perpendicular to the surface of the Ag/Ti/Si thin film while it was being heat-treated at 700 °C in an Ar + H2 ambient. The grown silver nanorods had widths and lengths of 20-50 and 250-500 nm with an abundance in {100} facet, respectively. The TiO2 cap layer also had the specific surface area, the total pore volume and the pore diameter of 474 m2/g, 0.49 cm3/g and 8.0 nm, respectively. Antibacterial activities of the TiO2-capped Ag nanorods... 

The effect of an electric field on the antibacterial activity of columnar aligned silver nanorods was investigated. Silver nanorods with a polygonal cross section, a width of 20-60 nm and a length of 260-550 nm, were grown on a titanium interlayer by applying an electric field perpendicular to the surface of a Ag/Ti/Si(100) thin film during its heat treatment at 700 °C in an Ar+H2 environment. The optical absorption spectrum of the silver nanorods exhibited two peaks at wavelengths of 350 and 395 nm corresponding to the main surface plasmon resonance bands of the one-dimensional silver nanostructures. It was found that the silver nanorods with an fcc structure were bounded mainly by {100}... 

The supernatant obtained from the extracellular laccase produced by Phanerochaete chrysosporium was used as the enzyme source to conduct a partial purification, characterization and dye decolorization study. The partially purified enzyme was stable in the pH range of 3–5 and showed an optimum activity at pH 4.0, using guaiacol as a substrate. Laccase stability of pH was determined and discovered to retain 100% of its activity at a pH of 4.0 after 2 h. The maximum enzyme activity was obtained between 30 and 50 °C. The maximum velocity and Michaelis constant were calculated as 3.171 µM−1·min and 1628.23 µM, respectively. The enzyme was activated by Fe2+, Zn2+, Ca2+ and Cu2+, while Hg2+, Mn2+,... 

In this study, SiC/Ti–Cu nanocomposite was fabricated by mechanical alloying and sintering process. Effects of SiC nano-reinforcement on phase transformation, microstructure and tribological and antibacterial properties Ti–Cu intermetallic alloy were studied. The microstructure of the powders and sintered materials was investigated using X-ray diffraction, and scanning/transmission electron microscopy. The results exhibited the formation of major TiCu and TiCu 4 , and minor Ti 2 Cu and Ti 2 Cu 3 nanocrystalline phases in the sintered Ti–Cu and SiC/Ti–Cu samples. With the addition of the nanoparticles, the amount of TiCu 4 phase increased. Reinforcing Ti–Cu intermetallic alloy by SiC... 

Electrospinning is an economical and alluring method to fabricate wound dressing mats from a variety of natural and synthetic materials. In this study, polyvinylidene fluoride (PVDF) and starch composite mats containing ciprofloxacin (CIP) loaded on titanium dioxide nanoparticles (TiO2) were prepared. Fourier Transform Infrared spectra of CIP, synthesized TiO2 NPs, TiO2/CIP, and PVDF/starch composite mats are analyzed. Scanning electron microscopy images revealed that the fiber diameter of PVDF nanofibers thickens by increasing starch, which varies between 180 nm and 550 nm. Strain at break of PVDF, starch, PVDF/starch (2:1 w:w; P2S1), PVDF/starch (1:1 w:w; P1S1), PVDF/starch (1:2 w:w;... 

In this research work, graphene/cobalt nanocomposites are functionalized with polyethylene glycol (PEG) to be a platform for theranostics application and antibacterial activity. The non-covalent functionalization of PEG on the surfaces of nanocomposites improved their stability and diminished their cytotoxicity. The PEGylated nanocomposites are demonstrated to allow simultaneous administration of two cancer therapy methods such as magnetic fluids hyperthermia (MFH) which is carried out by converting magnetic energy into heat through ferromagnetic cobalt nanoparticles and heat generation through near-infrared optical absorption by the reduced graphene oxide. A concise simulation is carried... 

In the current study, niosome-encapsulated tobramycin based on Span 60 and Tween 60 was synthesized and its biological efficacies including anti-bacterial, anti-efflux, and anti-biofilm activities were investigated against multidrug resistant (MDR) clinical strains of Pseudomonas aeruginosa. The niosomal formulations were characterized using scanning electron microscopy, transmission electron microscopy, and dynamic light scattering measurement. The encapsulation efficiency was found to be 69.54% ±; 0.67. The prepared niosomal formulations had a high storage stability to 60 days with small changes in size and drug entrapment, which indicates that it is a suitable candidate for pharmaceutical... 

Effects of SiC nanoparticles addition on synthesis and antibacterial properties of TiCu nanocrystalline powder prepared through high energy mechanical milling were studied. The results showed that the synthesis of TiCu powder in the presence of the nanoparticles was accelerated and after mechanical alloying for 20 h, a TiCu/SiC nanocrystalline powder with the crystallite size <5 nm, and 3.3% lattice micro-strain obtained. Further milling resulted in fully amorphous TiCu intermetallic alloy with more uniform distribution of SiC nanoparticles. The antibacterial activity of the synthesized powders was investigated by disk diffusion test. The TiCu/SiC nanocomposites showed enhanced antibacterial... 

The complexes PdII(qcq)(OAc) and PtII(qcq)Cl have been synthesized using environmentally benign synthesized ligands and characterized by elemental analyses: Fourier transform infrared spectroscopy, UV–visible spectroscopy, 1H NMR spectroscopy, and X-ray diffraction. The catalytic activity of the complex was assessed, in different media, for the Mizoroki–Heck coupling reaction for typical aryl halides and terminal olefins under aerobic conditions. Since the base and the solvent were found to influence the efficiency of the reaction, reaction conditions, temperature, time, and the amount of K3PO4 and a mixture of H2O/PEG, were optimized. We found, for the Mizoroki–Heck reaction coupling less... 

In the present study, bubble-driven magnesium-based micromotors were fabricated through a shading method, and the potential of magnetic guidance of magnesium-based Janus micro/nanomotors through functionalization with superparamagnetic iron oxide nanoparticles (SPIONs) was investigated for the first time. SPIONs had physical electrostatic attraction with the positively charged magnesium spheres due to negative charges on their surfaces. It was also found that upon applying a field gradient, the micromotors’ velocity increased by 13% unlike other magnetically navigated spherical magnesium-based micromotors which only show a change in direction. In this work the cytotoxicity of the moving... 

Nanomedicine has seen a significant rise in the development of new research tools and clinically functional devices. In this regard, significant advances and new commercial applications are expected in the pharmaceutical and orthopedic industries. For advanced orthopedic implant technologies, appropriate nanoscale surface modifications are highly effective strategies and are widely studied in the literature for improving implant performance. It is well-established that implants with nanotubular surfaces show a drastic improvement in new bone creation and gene expression compared to implants without nanotopography. Nevertheless, the scientific and clinical understanding of mixed oxide...