Sharif Digital Repository

Cancer is one of the most significant causes of death in the world. It has been shown that the role of circulating tumor cells (CTCs) in the early detection of cancer is crucial. Since the number of these cancerous cells in blood is very rare, the inertial microfluidic devices are one of the best candidates for the isolation of CTCs because they result in a high throughput process. Consequently, they can process a large volume of blood in a short time. Despite extensive computational and experimental studies on inertial microfluidic platforms, the impact of the curvature has not been thoroughly investigated during separation. In this paper, the feasibility of isolation of CTCs for... 

In this paper, we present a simple platform for colorimetric detection of glutathione using gold nanorods (AR ∼ 6.5 ± 0.2) as a plasmonic sensor. The functional mechanism of the sensor is based on shifts of longitudinal plasmon resonance during selective transverse overgrowth induced by preferential binding of glutathione at the nanorod tips. Under the optimum conditions, a calibration curve showed two linear regimes at the range of 50 nM to 20 μM of glutathione with a detection limit as low as 40 nM. The nanosensor maintains relatively high selectivity for determination of glutathione in the presence of several other amino acids. However, cysteine at similar concentration levels strongly... 

The performance of Co-flow fluidic thrust vectoring is a function of secondary flow characteristics and the fluidic nozzle geometry. In terms of nozzle geometry, wall shape and the secondary slot aspect ratio are the main parameters that control the vector angle. The present study aims to find a high quality wall shape to achieve the best thrust vectoring performance, which is characterized by the maximum thrust deflection angle with respect to the injected secondary air. A 3D computational fluid dynamics (CFD) model is employed to investigate the flow characteristics in thrust vectoring system. This model is validated using experimental data collected from the deflection of exhaust gases of... 

Two-dimensional numerical simulations have been performed to study natural convection in right-angled triangular enclosures filled with water considering different aspect ratios. Continuity, momentum and energy equations are solved assuming Boussinesq approximation utilizing COMSOL. Effect of Rayleigh number, Ra, on heat transfer rate is investigated by showing Nusselt number, Nu, for a range from 1 × 104 to 1 × 107 . It is shown that increasing aspect ratio of the cavity increases averaged Nusselt number in a cavity heated from below. Finally, a correlation for heat transfer rate is developed considering the effect of aspect ratio using simulation results  

In this paper, we study the frost formation and growth at the walls of a duct with uniform wall temperature variation. The simulation is performed for laminar flow regime considering suitable semi-empirical models incorporated with computational fluid dynamics (CFD) method. The frost growth is considered to be normal to the duct surface. Since the duct aspect ratio is high, we perform our simulations in two-dimensional zones. To simulate the frost layer properly, we solve both the energy and mass balance equations implementing some semi-empirical correlations on the frost side. At this stage, we suitably predict the required heat flux value at the solid boundary and the heat transfer... 

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the firstorder slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection... 

In the present study, based on 12-unknown higher order shear deformation theory (HSDT), buckling and vibration analysis of FG-CNTRC rectangular plate are investigated for various types of temperature distribution and boundary conditions. Implementing Hamilton’s principle, the equations of motion are derived and solved by adopting the Navier solution for the simply supported boundary conditions and DQM method for other boundary conditions. Validation is carried out by comparing the numerical results with those obtained in the open literature. Also, a detailed parametric analysis is carried out to illuminate the influence of different system parameters such as CNT distributions, CNT volume... 

In the present study, based on 12-unknown higher order shear deformation theory (HSDT), buckling and vibration analysis of FG-CNTRC rectangular plate are investigated for various types of temperature distribution and boundary conditions. Implementing Hamilton’s principle, the equations of motion are derived and solved by adopting the Navier solution for the simply supported boundary conditions and DQM method for other boundary conditions. Validation is carried out by comparing the numerical results with those obtained in the open literature. Also, a detailed parametric analysis is carried out to illuminate the influence of different system parameters such as CNT distributions, CNT volume... 

Dielectric scattering particles have widely been used as embedded scattering elements in dye-sensitized solar cells (DSCs) to improve the optical absorption of the device. Here we systematically study rodlike and spherical core-shell silica@Ag particles as more effective alternatives to the dielectric scattering particles. The wavelength-scale silica@Ag particles with sufficiently thin Ag shell support hybrid plasmonic-photonic resonance modes that have low parasitic absorption losses and a broadband optical response. Both of these features lead to their successful deployment in light trapping in high-efficiency DSCs. Optimized rodlike silica@Ag@silica particles improve the power conversion... 

Most of the studies related to the modeling of masonry structures have by far investigated either the in-plane (IP) or the out-of-plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load-bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement-controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the... 

Stability analysis of a horizontal cantilevered pipe conveying fluid with an inclined terminal nozzle is considered in this paper. The pipe is modelled as a cantilevered Euler-Bernoulli beam, and the flow-induced inertia, Coriolis and centrifugal forces along the pipe as well as the follower force induced by the jet-flow are taken into account. The governing equations of the coupled bending-torsional vibrations of the pipe are obtained using extended Hamilton's principle and are then discretized via the Galerkin method. The resulting eigenvalue problem is then solved, and several cases are examined to determine the effect of nozzle inclination angle, nozzle aspect ratio, mass ratio and... 

The behavior of low-speed liquid jets emerging from rectangular orifices into a quiescent air is studied numerically. After ejection, the rectangular cross-section transforms into an elliptical form along the jet and while axis-switching includes elliptical cross-sections only, the rectangular shape never establishes again. The optimum wavenumber, corresponding to the most dominant wave, is found to be greater in orifices with higher aspect ratios and, as a result, breakup length of the jet will be shorter. The breakup length decreases exponentially with the initial amplitude of disturbances. Moreover, it is observed that the form of final breakup leads to elimination of the satellite... 

A CMOS fully differential UHF variable gain amplifier for use in a direct-conversion DVB-H receiver is presented employing input devices with variable aspect ratios. High linearity is achieved by reducing the transconductance of the input transistors for lower gain settings. It is shown that this technique has better linearity and noise performance compared to the conventional methods in which the gain reduction is performed at preceding stages. Implemented in TSMC 0.18-μm CMOS process, the inductorless RF VGA covers a voltage gain ranging from 15.5 dB to -6.5 dB with a maximum IIP3 of +24 dBm. The amplifier achieves a 3-dB bandwidth of 1.4 GHz and a minimum noise figure of 5.8 dB while... 

In this study the energy concept along with the classical plate theory (CPT), first and third order shear deformation theories (FSDT and TSDT) are used to predict the large deflection and through the thickness stresses of a FGM plate. For defining the volume fraction of the FGM constituent materials three different functions are considered; simple power-law (PFGM), exponential (E-FGM) and sigmoid (S_FGM) functions. Power-law and exponential functions are commonly used tocontrol the variations of properties of FGMs. However, with both functions, a stress concentration appears due to abruptchange of the volume fraction of the constituents. Therefore, a sigmoid FGM is used to define a new... 

Purpose - The purpose of this paper is to present a fast, economical and practical method for mathematical modeling of aerodynamic characteristics of rectangular wing in ground (WIG) effect. Design/methodology/approach - Reynolds averaged Navier-Stokes (RANS) equations were converted to Bernoulli equation by reasonable assumptions. Also, Helmbold's equation has been developed for calculation of the slope of wing lift coefficient in ground effect by defining equivalent aspect ratio (ARe). Comparison of present work results against the experimental results has shown good agreement. Findings - A practical mathematical modeling with lower computational time and higher accuracy was presented for... 

Molecular structural mechanics is implemented to model vibrational behavior of defect free single-layered graphene sheets (SLGSs) at constant temperature. To mimic these two-dimensional layers, zigzag and armchair models with cantilever and bridge boundary conditions are adopted. Fundamental frequencies of these nano structures are calculated, and it is perceived that they are independent of the chirality and aspect ratio. Effects of point mass and atomistic dust on the fundamental frequencies are also considered in order to investigate the possibility of using SLGSs as sensors. Results of exhibit the principle frequencies are highly sensitive to the added mass in the order of 10-6 fg.... 

Roof greening is a new technique for improvement of outdoor thermal environment which influences air quality through its impacts on thermal and flow field. In order to examine effects of green roofs on reactive pollutant dispersion within urban street canyons, a computational fluid dynamics (CFD) model was employed which contained NO-NO2-O3 photochemistry and energy balance models. Simulations were performed for street canyons with different aspect ratios (H/W) of 0.5, 1.0, and 2.0 such that leaf area density (LAD) of green roofs changed. It was found that roof greening led distribution of pollutants to alter for H/W = 0.5 and 1.0 cases in such a manner that their averaged concentrations had... 

In this study, a multiplate shear model is developed for dynamic analysis of multilayer graphene sheets with arbitrary shapes considering the interlayer shear effect. By utilizing the model, then some free-vibration analysis is presented. According to the experimental results, the weak interlayer van der Waals interaction cannot maintain the integrity of carbon atoms in adjacent layers. Therefore, it is required that the interlayer shear effect is accounted to study multilayer graphene mechanical behavior. The governing differential equation of motion is derived for the multilayer graphene sheets utilizing a variational approach based on the Kirchhoff plate model. The essential and natural... 

In this study, we present fabrication and characterization of a gas ionization sensor based on high aspect ratio one-dimensional CuO nanowires as the field enhancing medium. Self-organized arrays of CuO nanowires have been synthesized based on a low-cost thermal oxidation method and integrated into a gas ionization sensor (GIS). The self-organized arrays of CuO nanowires have been employed to detect the identity of several gas species such as He, Ar and CO at ambient temperature and pressure. The sharp nanoscale size of CuO tips provide very high electric fields at moderate voltages (less than 100 V) and provoke the breakdown of different gases. The reduced breakdown current of the metal... 

In this work, the optical responses of Fe3O4@Au and Fe3O4@Ag are comprehensively investigated using the discrete dipole approximation. It is found that the resonance wavelength and absorption efficiency strongly depend on the composition of the core and shell, geometry of the nanoparticles, core to particle volume ratio, core radius and shell thickness. The strongest impact is due to the shell material, the shape of the nanoparticles and their combination. When the composition of the shell is changed from gold to silver, instead of one fundamental resonance peak the absorption spectrum shows two, corresponding to the bonding plasmon mode at the nanoparticle-environment interface and...