Sharif Digital Repository

This article is focused on a simple approach for determining the natural frequency and mode shape of laminated angle-ply plates with various shapes by rectangular orthotropy. Since the boundary of the domain for all shapes are not natural to the material coordinate axes it seems appropriate to express the plate displacement amplitude in terms of a polynomial and a general shape function multiplication in the x and y coordinates. The boundary conditions considered are clamped and simply supported edges. The effect of the fiber orientation, layer number, and lamination sequence on the natural frequencies of plates is also considered. The natural frequency determinant has been generated using... 

In this paper, the effect of increasing the number of layers on improving the thermal performance of microchannel heat sinks is studied. In this way, both numerical and analytical methods are utilized. The analytical method is based on the porous medium assumption. Here, the modified Darcy equation and the energy balance equations are used. The method has led to an analytical expression presenting the average dimensionless temperature field in the multilayer microchannel heat sink. The effects of different parameters such as aspect ratio, porosity, channel width, and the solid properties on the thermal resistance are described. The results for single layer and multilayer heat sinks are... 

Fin stabilizers are very important device for controlling the ship roll motion against the external moments due to wave. This paper presents numerical results for flow field simulation and the hydrodynamic performance of fin stabilizer attached to a ship hull with free surface effects. Combination of CFD and RANS method has been used for this study. The fin is nonrectangular NACA0015 profile section with a finite aspect ratio. The numerical results include pressure distributions and flow field around the fin which are used to calculate lift coefficients and free surface elevation as the main interest. Some results are compared with available experimental and numerical data in literature and... 

The Co nanowire arrays were synthesized by electrodeposition in polycarbonate template (PC) with 4 μm thickness. Electron field emission properties of cobalt nanowires were studied for wires with different aspect ratios, R ranged between 10 and 60, while the diameter of wires was fixed about 50 nm. The field emission properties of the samples showed low turn on electric field (Eto) with values varying between 2.9 and 11.3 V/μm showing a minimum value for R = 20 (Eto < 3 V/μm). On the other hand, the enhancement factor shows a peak for nanowires length about 1 μm. Field emission data using the Fowler-Nordhiem theory showed nearly straight-line nature confirming cold field emission of... 

Branched hierarchical zinc oxide nanowires (BH-ZnO NWs) were fabricated successfully by a facile and rapid synthesis using two-step growth process. Initially, ZnO NWs have been prepared by anodizing zinc foil at room temperature and followed by annealing treatment. Then, the BH- ZnO NWs were grown on the ZnO NWs by a solution based method at very low temperature (31 oC). The BH- ZnO NWs with different aspect ratio were obtained by varying reaction time (0.5, 2, 5, 10 h). Photocatalytic activity of the samples was studied under both UV and visible light. The results indicated that the optimized BH-ZnO NWs (5 h) as a photocatalyst exhibited the highest photoactivity with about 3 times higher... 

Separation of particles or cells has various applications in biotechnology, pharmaceutical and chemical industry. Inertial cell separation, in particular, has been gaining a great attention in the recent years since it has exhibited a label-free, high-throughput and efficient performance. In this work, first, an inertial contraction–expansion array microchannel device, capable of passively separating two particles with diameters of 4 and 10 μm, was numerically studied. Then, the validated model was combined with curved geometries in order to investigate the effect of curve features on the separation process. The overall purpose was to investigate the interaction between the two different... 

The aim of this experimental work is to study the effect of grooved surfaces in the entrance region of annular flows on local heat transfer. The outer stationary cylinder is grooved and the inner rotating cylinder is smooth. This configuration is applicable in industrial applications such as rotating heat pipes for cooling of superconducting machines or motors rotor, electrical generators where heat generates in the grooves containing wires, transient heating of axial compressor rotor drams, combustion chamber in turbojets, air-cooled axial-flux permanent-magnet machines. The experimental tests were performed based on aspect ratio of the groove, effective Reynolds number and Taylor number.... 

In the present research, the rising behavior of air bubble in a viscous liquid is investigated experimentally. Aqueous solutions of glycerol and CMC were used as the Newtonian and shear-thinning non-Newtonian viscous liquids, respectively. The bubble is formed via injection of air by a syringe pump and rises in the quiescent viscous liquid. The process was captured using a high-speed camera (1000 fps) and was post processed to obtain the bubble characteristics such as the center of mass and aspect ratio. The experimental results were verified using the existing literatures and the non-dimensional numbers were reduced to two (Velocity number and Flow number) by lumping the parameters. In... 

This study proposes a novel type of metallic yielding damper called block slit damper or BSD. This damper is a slit damper with very low height to thickness ratio. This device has high shear capacities, and is more economical than SSD devices with high height to thickness ratios. Based on theoretical analysis the formulation for the BSD device's main parameters is derived. Then to investigate the hysteretic behavior of the proposed devices, 5 specimens with different aspect ratios (height-width ratios) were manufactured and tested in a quasi-static manner. The tests revealed that by reducing the aspect ratios, the shear and energy dissipation capacity increases while the displacement... 

In the recent years, different mathematical models have been suggested for maneuvering of displacement vessels, which are capable to estimate maneuvering of the vessel with acceptable precision. But, simulation of planing craft maneuverability through a mathematical model has not been developed yet. In this paper, a mathematical model is developed for maneuvering of the planing craft by including the rudder forces and moments. Different maneuvers, such as straight-line stability, course keeping, and turning circle, are executed through the mathematical model. Simulation results are validated with the published experimental results and it is shown that they are in good agreement. Finally, the... 

A continuum theory is employed to numerically study the equilibrium orientation and defect structures of a circular cylindrical particle with flat ends under a homeotropic anchoring condition in a uniform nematic medium. Different aspect ratios of this colloidal geometry from thin discotic to long rodlike shapes and several colloidal length scales ranging from mesoscale to nanoscale are investigated. We show that the equilibrium state of this colloidal geometry is sensitive to the two geometrical parameters: aspect ratio and length scale of the particle. For a large enough mesoscopic particle, there is a specific asymptotic equilibrium angle associated to each aspect ratio. Upon reducing the... 

Micro-mixers are considered as vital components of Micro Total Analysis systems (μTAS). Major objective in the design of micro-mixers is achieving high mixing quality in short mixing times. In this paper, numerical simulation of some micro-mixer designs has been carried out to understand the detailed flow pattern and thereby to propose modifications for improving mixing efficiency. It is well known that inducing convection will provide turbulent like behavior with corresponding mixing enhancement. In micro systems to drive the flow, electro-osmotic force is usually used by introducing electrodes. In this work, mixing electrodes have been implemented to induce convection and eddies. This... 

Developing low-cost, scalable and reproducible synthesis methods for water oxidation reaction (WOR) catalysts is highly desirable and also challenging in energy, environmental and industrial applications. In this context, electrochemical deposition is known as an easy and cost-effective technique in nanomaterial growth. Herein, cobalt-based nanoflakes were grown on a flexible and commercially available steel mesh substrate by electrodeposition approach with a crystalline structure as a mixture of oxide, hydroxide and oxyhydroxide phases. For the first time, the correlation between electrodeposition parameters, time and current density, and morphological characteristics of the grown... 

It is well-known that classical continuum theory has certain deficiencies in predicting material's behavior at the micro- and nanoscales, where the size effect is not negligible. Higher order continuum theories introduce new material constants into the formulation, making the interpretation of the size effect possible. One famous version of these theories is the couple stress theory, invoked to study the anti-plane problems of the elliptic inhomogeneities and inclusions in the present work. The formulation in elliptic coordinates leads to an exact series solution involving Mathieu functions. Subsequently, the elastic fields of a single inhomogeneity in conjunction with the Mori-Tanaka theory... 

Titanium(IV) tetraisopropoxide was employed as a metal oxide sol-gel precursor to prepare ceramic composite nanofibers by the electrospinning system. To facilitate this process and obtain the desired nanofibers with higher aspect ratios and surface area, poly(vinylpyrrolidone) was added to the sol of titania. Four ceramic nanofibers sheets based on titania were prepared while each sheet contained different transition metals such as Fe-Mn, Fe-Ni, Fe-Co, and Fe-Mn-Co-Ni. The scanning electron microscope images showed good homogeneity for all the prepared ceramic composites with a diameter range of 100-250 nm. The sorption efficiency was investigated by a micro-solid-phase extraction setup in... 

Infinite series solutions are obtained for electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties of long pH-regulated rectangular nanochannels of low surface potential utilizing the double finite Fourier transform method. Closed form expressions are also obtained for channels of large height to width ratio for which the depthwise variations vanish. Neglecting the Stern layer impact, the effects of EDL (Electric Double Layer) overlap, multiple ionic species, and association/dissociation reactions on the surface are all taken into account. Moreover, finite-element-based numerical simulations are conducted to account for the end effects as well... 

The electrokinetic phenomena at high zeta potentials may show several unique features which are not normally observed. One of these features is the ionic size (steric) effect associated with the solutions of high ionic concentration. In the present work, attention is given to the influences of finite ionic size on the cross stream diffusion process in an electrokinetically actuated Y-shaped micromixer. The method consists of a finite difference based numerical approach for non-uniform grid which is applied to the dimensionless form of the governing equations, including the modified Poisson-Boltzmann equation. The results reveal that, neglecting the ionic size at high zeta potentials gives... 

The secondary flow of PTT fluids in rectangular cross-sectional plane of microchannels under combined effects of electroosmotic and pressure driving forces is the subject of the present study. Employing second-order central finite difference method in a very refined grid network, we investigate the effect of electrokinetic and geometric parameters on the pattern, strength and the average of the secondary flow. In this regard, we try to illustrate the deformations of recirculating vortices due to change in the dimensionless Debye–Hückel and zeta potential parameters as well as channel aspect ratio. We demonstrate that, in the presence of thick electric double layers, significant alteration... 

Electroosmosis is the predominant mechanism for flow generation in lab-on-chip devices. Since most biofluids encountered in these devices are considered to be non-Newtonian, it is vital to study the flow characteristics of common non-Newtonian models under electroosmotic body force. In this paper, the hydrodynamically fully developed electroosmotic flow of power-law fluids in rectangular microchannels is analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. A thoroughgoing parametric study reveals that the Poiseuille number is an increasing function of the channel aspect ratio, the zeta potential, the... 

Extensive wind tunnel tests were performed on several wing- body-tail combinations in subsonic flow to study the effects of wing geometric parameters on the flow field over the tail. For each configuration, tail surface pressure distribution, as well as the velocity contour at a plane perpendicular to the flow direction behind the wing was measured. The results show a strong effect of wing to tail span ratio, as well as wing aspect ratio, on the flowfield downstream of the wing. For low sweep wings, as those considered here, wing and body interference effects on the tail are associated with the wing tip vortex and nose-body vortex