Sharif Digital Repository

For a dye-sensitized solar cell with a near-infrared squaraine (SQ1) sensitizer, the photovoltaic performance was enhanced remarkably with a reflective luminescent down-shifting (R-LDS) layer to increase the light-harvesting efficiency at the wavelength region 400-550 nm where the SQ1 dye has weak absorption. Relative enhancements greater than 200% in IPCE near 500 nm and 40-54% in JSC were achieved with red phosphor CaAlSiN 3:Eu2+ as the LDS material, attaining 5.0 and 4.8% overall efficiencies of power conversion for the R-LDS layer coated on the counter electrode (front illumination) and working electrode (back illumination), respectively  

To figure out the relationship between nutrient deprivation and cell growth, simulation can be effective. In the present work, the growth of Chinese Hamster Ovary (CHO) cells was simulated based on stoichiometric and kinetics calculations. The simulation results were compared to the experimental data from a packed-bed bioreactor and a good agreement was observed. The kinetic parameters (K Glc, K Amn, K Lact and μ Max) were optimized by a genetic algorithm method using stoichiometric parameters (Y X/Glc, Y X/Amm, and Y Lac/Glc). The stoichiometric and kinetic parameters were used in the simulation to study the growth of CHO cells. The concentrations of the toxic by-products, ammonium and... 

Hollow structures show both light scattering and light trapping, which makes them promising for dye-sensitized solar cell (DSSC) applications. In this work, nanoparticulate hollow TiO 2 fibers are prepared by layer-by-layer (LbL) self-assembly deposition of TiO 2 nanoparticles on natural cellulose fibers as template, followed by thermal removal of the template. The effect of LbL parameters such as the type and molecular weight of polyelectrolyte, number of dip cycles, and the TiO 2 dispersion (amorphous or crystalline sol) are investigated. LbL deposition with weak polyelectrolytes (polyethylenimine, PEI) gives greater nanoparticle deposition yield compared to strong polyelectrolytes... 

In this study, a new model of microbial fuel cell (MFC) was obtained for the first time. The modeled MFC was made using a combination of two approaches; the conduction-based method and two-step anaerobic digestion. Performance of the MFC was based on calculations for current evolution and polarization curves with different subsequent variables of the biofilm and anolyte. The model was able to make predictions for performance of the MFC for a simple substrate to more complex ones. The model was successfully validated with a variety of substrates (acetate, glucose and dairy wastewater) and the results were compared with previously published measurements. The model polarization results showed... 

Mechanical stress caused by agitation is one of the factors that can affect hematopoietic stem cell expansion in suspension bioreactors. Therefore, we have investigated the effects of agitation on umbilical cord blood hematopoietic stem cell (UCB-HSC) growth and differentiation. A comparison was made between various agitation rates (20, 40 and 60 rpm) in spinner-flask and cells cultured in glass petri dish as a static culture. Moreover, the fluid dynamic at various agitation rates of spinner-flask was analyzed to determine shear stress. The spinner-flask contained a rotational moving mixer with glass ball and was kept in tissue culture incubator. To reduce consumption of cytokines, UCB-serum... 

In this paper an analytical approach to study the effect of the substrate physical properties on the kinetics of adhesion and motility behavior of cells is presented. Cell adhesion is mediated by the binding of cell wall receptors and substrate's complementary ligands, and tight adhesion is accomplished by the recruitment of the cell wall binders to the adhesion zone. The binders' movement is modeled as their axisymmetric diffusion in the fluid-like cell membrane. In order to preserve the thermodynamic consistency, the energy balance for the cell-substrate interaction is imposed on the diffusion equation. Solving the axisymmetric diffusion-energy balance coupled equations, it turns out that... 

Here, we report on utilizing a photoactive protein, bacteriorhodopsin (bR), as a light harvester in combination with TiO2 nanoparticles in biosensitized solar cell application. Experiments have been conducted to investigate the capability of surface adsorption of bR on nanoparticular TiO2photoanodes. Different pretreatment processes have been done to modify the interface of TiO2 nanoparticles and bR as a biophotosensitizer. Our results indicate the feasibility of efficient immobilization and photoinduced charge transfer of bR to the nanostructured TiO2 photoelectrode. Under illumination of simulated AM1.5 sunlight, the solar-light-to-electricity... 

Planar superstrate CuInS2 (CIS) solar cell devices are fabricated using totally solution-processed deposition methods. These Cd-free devices are structured by FTO/TiO2/In2S3/CIS/carbon, where TiO2 and In2S3 are deposited by spray pyrolysis, and a CIS film is deposited using spin-coating followed by annealing at 250 °C. The pasted carbon layer is utilized as the anode. No further sulfurization or selenization is employed. The Cu/In ratio in the ink is found as a critical factor affecting the morphology and crystallinity of the film as well as the photovoltaic performance of the device. An optimum Cu/In = 1.05 results in large-grain films with sharp diffraction peaks and, subsequently, optimal... 

Reduced graphene oxide nanomeshes (rGONMs), as p-type semiconductors with band-gap energy of ~1. eV, were developed and applied in near infrared (NIR) laser stimulation of human neural stem cells (hNSCs) into neurons. The biocompatibility of the rGONMs in growth of hNSCs was found similar to that of the graphene oxide (GO) sheets. Proliferation of the hNSCs on the GONMs was assigned to the excess oxygen functional groups formed on edge defects of the GONMs, resulting in superhydrophilicity of the surface. Under NIR laser stimulation, the graphene layers (especially the rGONMs) exhibited significant cell differentiations, including more elongations of the cells and higher differentiation of... 

We report a study on chalcopyrite solar cells fabricated by low-cost, nonvacuum, and selenization-free methods. Superstrate-type CuInS2 (CIS) thin-film solar cells were prepared by sequential ink deposition. The CIS film was formed from a stable low-carbon ink, which was synthesized at low temperature (<120 °C). The CIS nanoparticle ink was prepared with n-butylamine and acetic acid as the solvent and stabilizer, respectively. The viscous and stable ink that formed through the dispersion of the final nanoparticles in N,N-dimethylformamide (DMF) could be deposited readily onto the substrate. The major features of the obtained ink are the small amount of impurity phases and negligible carbon... 

Embryogenesis, regeneration and cell differentiation in microbiological entities are influenced by mechanical forces. Therefore, development of mechanical properties of these materials is important. Neural network technique is a useful method which can be used to obtain cell deformation by the means of force-geometric deformation data or vice versa. Prior to insertion in the needle injection process, deformation and geometry of cell under external point-load is a key element to understand the interaction between cell and needle. In this paper, the goal is the prediction of cell membrane deformation under a certain force and to visually estimate the force of indentation on the membrane from... 

Technology Identification involves developing a list of technologies which are, or may be, incorporated into products or processes. After reviewing Technology Assessment, Technology Strategy, Management of Technology and New Product Development in literature, four methods of Technology Identification are investigated: Value Chain of Technologies, Process-based Approach, Quality Function Deployment and Technology Mapping. A model facilitating decision making process is then proposed by which the most appropriate method to be employed is identified. The proposed model is examined in specific case of fuel cell technologies while preparing the Fuel cell Development Strategic Plan of Iran. 1... 

Dye-sensitized solar cells (DSCs) with nanotubular TiO2 electrodes of varying thicknesses are compared to DSCs based on conventional nanoparticulate electrodes. Despite the higher degree of order in one-dimensional nanotubular electrodes, electron transport times and diffusion coefficients, determined under short-circuit conditions, are comparable to those of nanoparticulate electrodes. The quasi-Fermi level, however, is much lower in the nanotubes, suggesting a lower concentration of conduction band electrons. This provides evidence for a much higher diffusion coefficient for conduction band electrons in nanotubes than in nanoparticulate films. The electron lifetime and the diffusion length... 

Doxorubicin-loaded nanocarriers were produced employing folate-modified polyethylene glycol (PEG)-functionalized gold nanoparticles for targeted delivery to positive folate-receptor cancer cells. Doxorubicin and folate were, respectively, conjugated to activated-folate and activated-PEG. The conjugates formed doxorubicin nanocarrier with an average size of 12 nm in diameter. The drug release response of functionalized gold nanoparticles was characterized by an initial rapid drug release followed by a controlled release. The doxorubicin nanocarriers showed higher cytotoxic effect on folate-receptor-positive cells (KB cells) than folatereceptor-negative cells (A549 cells). Cell viability in... 

A low-cost carbon cloth is applied in perovskite solar cells (PSC) as a collector composite and degradation inhibitor. This study incorporates carbon fibers as a back contact in perovskite solar cells, which results in enhancement in all photovoltaic parameters. This material is suitable for large-scale fabrication of PSCs as it has shown an improved long-term stability when compared to the gold counterpart under elevated temperatures  

Cell dynamics and motion stages are very important issues in the biological cell investigation in this novel method, we propose a novel method based on Kalman filter and second momentum for tracking cells on Sequential Microscopic Images. In proposed manner at first, we select a cell and cut covering rectangle. in the next step, we predict rectangle center of the cell in Next frame based on a modeling of velocity-acceleration using Kalman filter. The rectangle with triple covering area of previous cell rectangle and predicting center by Kalman filter is considered as a searching area. So, if all objects in the search areas have second momentum error less than threshold, it is selected as a... 

A cell migration numerical simulation is presented to mimic the motility of endothelial cells subjected to the concentration gradients of a Forebrain embryoniccortical neuron Conditioned Medium (CM). This factor was previously shflown to induce the directional chemotaxis of endothelial cells with an over-expressed G protein coupled receptor 124 (GPR 124). A cell simulator program incorporates basic elements of the cell cytoskeleton, including membrane, nucleus and cytoskeleton. The developed 2D cell model is capable of responding to concentration gradients of biochemical factors by changing the cytoskeleton arrangement. Random walk force, cell drag force and cell inertial effects are also... 

The present study demonstrates HEMA-grafted nanodiamond (ND-HEMA)/acrylate-terminated polyurethane-acrylate diluents (APUA) composites as promising materials for bone implant applications. Neat APUA and APUA composites containing ND-HEMA at different loadings up to 2 wt% were prepared by an in situ polymerization method. Morphological analysis demonstrated that ND-HEMAs were actually in the form of tightly bound aggregates which led to formation of big agglomerates at a concentration of 2 wt%. It was also suggested that ND-HEMAs were preferentially localized in the continuous soft domain of APUA; however it interacted by both soft and hard domains. Moreover, ND-HEMAs caused considerable... 

Interface engineering of solar cell device is a prominent strategy to improve the device performance. Herein, we synthesize reduced-graphene scaffold (rGS) by using a new and simple chemical approach. In this regard, we synthesize a hollow structure of graphene and then fabricate a three-dimensional scaffold of graphene with a superior surface area using electrophoretic process. We employ this scaffold as an interface layer between the electron transfer and absorber layers in perovskite solar cell. The characterization tests and photovoltaic results show that rGS improves the carrier transportation, yielding a 27% improvement in device performance as compared to conventional device. Finally,... 

A three-step method for the deposition of CH3NH3PbI3 perovskite films with a high crystalline structure and large cuboid overlayer morphology is reported. The method includes PbI2 deposition, which is followed by dipping into a solution of C4H9NH3I (BAI) and (BA)2PbI4 perovskite formation. In the final step, the poorly thermodynamically stable (BA)2PbI4 phase converts into the more stable CH3NH3PbI3 perovskite by dipping into a solution of CH3NH3I. The final product is characterized by XRD, SEM, UV/Vis, and photoluminescence analysis methods. The experimental results indicate that the prepared perovskite has cuboids with high crystallinity and large sizes (up to 1 μm), as confirmed by XRD...