Sharif Digital Repository

A three-dimensional (3D) graphene/Nickel oxide (ERGO/NiO) composite electrode have been fabricated directly on a Nickel foam substrate via a one-step electrochemical co-deposition in an aqueous solution containing Nickel nitrate and GO. By using this simple and one-step electrochemical deposition, it is possible to produce binder-free composite electrodes with improved electrochemical properties using a low-cost, facile and scalable technique. It is observed from FE-SEM images that graphene oxide sheets affect the electrodeposition of nickel oxide. The optimized ErGO/NiO electrode developed in this work exhibits high charge storage capacity with a specific capacitance of 1715.5 F g−1 at... 

BiVO4/Graphene/TiO2 as a novel nanocomposite photoanode was designed, synthesized and characterized for photoelectrochemical application. BiVO4/Graphene nanocomposite was initially synthesized by photocatalytic process and then, BiVO4/Graphene/TiO2 nanocomposite thin film was prepared by deposition of the BiVO4/Graphene solution onto the surface of sol-gel derived TiO2 thin film. Morphology, crystal structure, surface chemical composition and optical properties of the synthesized BiVO4/Graphene/TiO2 nanocomposite thin film were characterized and compared with the BiVO4/Graphene and pure TiO2 samples. Observations of scanning electron microscopy (SEM) images revealed that the surface of the... 

The current study presents a supercritical synthesis of magnetite-reduced graphene oxide (M-RGO) in methanol media, in which Fe3O4 nanoparticles are simultaneously formed, surface modified and decorated on the surface of the reduced graphene oxide. Simulations using density functional theory, which were performed using the M06-2x/cc-pVDZ level of theory, indicate that upon adsorption of a Fe3O4 cluster on the graphene, the overall charge on the graphene surface becomes about -0.0236e, indicating charge transfer from the Fe3O4 cluster to the graphene surface. Instrumental and chemical analyses exhibited the formation of strong bonds between Fe3O4 and graphene, through C-O-Fe and C-Fe bridges.... 

Copper sulfide deposited ZnO nanorods (ZnO NRs/CuS) have been applied as a new counter electrode material with high electrocatalytic activity towards polysulfide electrolyte, which results in the formation of a highly efficient counter electrode for QDSSCs. It was observed from the current density-voltage (J-V) characteristics that the short-circuit current density (Jsc), power conversion efficiency (PCE), and fill factor (FF) were enhanced from 7.63 mA cm-2 to 14.48 mA cm-2, 1.59% to 4.18%, and 0.29 to 0.38, respectively, when a bare CuS counter electrode was changed to a ZnO NRs/CuS counter electrode. Electrochemical impedance spectroscopy (EIS), Tafel polarization and cyclic voltammetry... 

The conventional solar cell architectures include a p-n junction of c-Si sandwiched by rear and front contacts. The conventional approach features a complex as well as expensive procedure. Here, we propose a new architecture for p-n heterojunction solar cells prepared by a simple and cost-effective procedure. In this regard, (1) a silicon wafer underwent surface treatment through electrochemical anodization. To prepare a stick junction, (2) photoactive TiO2 nanoparticles were deposited over the porous layer by electrophoretic technique. Finally, (3) indium tin oxide (ITO) was sputtered. During the fabrication steps, we examined various anodization times ranging from 6 to 12 min to study the... 

This paper reports a simple, low-cost, and effective electrochemical technique for sensing and reducing CrVI based on a Au-Pd bimetallic nanoparticle (BNP)-decorated indium tin oxide (ITO) conducting glass electrode. It was observed that the Au-Pd BNP-decorated ITO electrode could significantly boost the electrochemical reduction of CrVI when compared with either Au nanoparticle- or Pd nanoparticle-decorated ITO electrodes. These BNP-decorated electrodes exhibited a wide linear concentration range of 0.001-100 μM, a very low detection limit (signal-to-noise ratio = 3) of 0.3 nM, and a high sensitivity of 1.701 μA μM-1. From electrochemical impedance spectroscopy, it was revealed that this... 

Demand for more efficient energy storage devices stimulates efforts to search and develop new materials and composites with promising properties. In this regard, composite materials, including carbonaceous materials and metal oxides have attracted a great attention due to better electrochemical performance as compared to their single material analogues. For the first time, herein, we report a new and simple procedure for preparing porous highly oriented pyrolytic graphite/nickel hydroxide composite (P-HOPG/Ni(OH)2) via a fast and simple two-step electrochemical method including potentiostatic routes. In the first step, a low anodic potential (2 V) was applied to pristine HOPG in 0.5 M H2SO4... 

Energy and environment crises motivated scientists to develop sustainable, renewable, and clean energy resources mainly based on solar hydrogen. For this purpose, one main challenge is the low cost flexible substrates for designing earth abundant efficient cocatalysts to reduce required water oxidation overpotential. Here, a systematic morphological and electrochemical study has been reported for cobalt oxide/hydroxide nanoflakes simply electrodeposited on four different commercially available substrates, titanium, copper sheet, steel mesh, and nickel foam. Remarkable dependence between the used substrate, morphology, and electrocatalytic properties of nanoflakes introduced flexible porous... 

Abstract: Surface-nanostructured TiO2 nanorods were synthesized hydrothermally at 180 °C. Such nanorods have ‘crack-like’ surfaces that resemble burnt charcoal. Compared to nanorods with relatively smoother surfaces, the charcoal-like nanorods have higher-specific surface areas. By using the nanorods as a light-scattering layer in double-layered dye-sensitized solar cells, the cells based on the charcoal-like nanorods have 20 % higher dye loading and also higher diffuse reflectance compared with cells utilizing ‘smooth’ nanorods. The efficiency of a screen-printed double-layer dye-sensitized solar cell based on the charcoal-like nanorods is higher at 7.29 %. Electrochemical... 

Morphology tailored TiO2 nano assemblies consisting of nanorods with and without nanoparticle attachments were hydrothermally synthesized and their characteristics and light scattering properties were determined by x-ray diffraction (XRD), nitrogen sorption analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), electrochemical impedance spectroscopy (EIS) and ultraviolet-visible spectroscopy (UV-Vis). The nanorod-nanoparticles (NR-NP) assemblies and smooth nanorod (NR) double layers were screen printed onto fluorine doped tin oxide coated glass underlayers to fabricate dye-sensitized solar cell (DSSC) photoanodes. The double layer heterogeneous... 

Abstract We report the well-controlled preparation of WS2 nanosheets-CdS nanoparticle heterojunction for photoelectrochemical (PEC) water splitting application. The WS2 nanosheets with an average thickness of ~5 nm and lateral dimensions of ~200 nm were synthesized via liquid phase exfoliation of bulk WS2 in water/ethanol solution, followed by deposition onto ITO substrate via electrophoretic method. CdS nanoparticles were grown via facile successive ion layer absorption and reaction (SILAR) method. Using these two well-controlled methods, CdS/WS2/ITO and WS2/CdS/ITO systems were fabricated. The loading of WS2 nanosheets was... 

The heterobinuclear cyclometalated PtII-AuI complexes of the type [MePt(bhq)(μ-dppy)AuL]PF6, in which, bhq = benzo{h}quinoline, dppy = 2-diphenylphosphinopyridine, L = PPh3, 5; PPh2Me, 6; PPhMe2, 7; have been prepared by reaction of the mononuclear platinum(II) complex [MePt(bhq)(dppy)], 1, with 1 equiv. [AuL]+. Also, the reaction of complex 1 with 1 equiv AuCl(SMe2) at -60 °C gave the neutral heterobinuclear complex [MePt(bhq)(μ-dppy)AuCl], 8. All of the complexes were characterized using NMR spectroscopy and elemental microanalysis and complexes 5 and 8 were further identified by single crystal X-ray structure determination. Time-dependent density functional theory (TD-DFT) is used to... 

Here, we report on utilizing a photoactive protein, bacteriorhodopsin (bR), as a light harvester in combination with TiO2 nanoparticles in biosensitized solar cell application. Experiments have been conducted to investigate the capability of surface adsorption of bR on nanoparticular TiO2photoanodes. Different pretreatment processes have been done to modify the interface of TiO2 nanoparticles and bR as a biophotosensitizer. Our results indicate the feasibility of efficient immobilization and photoinduced charge transfer of bR to the nanostructured TiO2 photoelectrode. Under illumination of simulated AM1.5 sunlight, the solar-light-to-electricity... 

Discharge characteristics of nanorods (NRs), microsized and nanosized copper (II) oxide (CuO) particles prepared via thermal decomposition and thermal oxidation routes are examined as cathode materials of a Zn/CuO cell without membrane separators. The electrochemical discharge is examined galvanostatically at a current density of 500 mAg−1 and reveals that the first discharge cycles of all the CuO materials contain one potential plateau; subsequent discharge cycles involve three potential plateaus. Each potential plateau is due to an electrochemical reaction. The first, second, and third potential plateaus are attributed to Cu2O3, CuO, and Cu2O discharges,... 

Cadmium sulfide (CdS) thin film was electrodeposited on indium tin oxide (ITO) by chronoamperometry. The SEM images showed that hexagonal sheets of CdS deposited on the ITO surface. The X-ray diffraction (XRD) analysis confirmed this structure for CdS crystals and the average of crystalline size and the lattice constant parameters are approximately 39.54 and a = 0.4136, c = 0.6696 nm respectively. Photo-electrochemical investigations were performed by cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS) techniques. CdS band edges and density of states (DOS) were determined by CV technique. The band gap energy (Ebg) was measured... 

In this study, two types of ionic liquids (ILs) based on 1 butyl 3 methylimidazolium [Bmim]+ and butyltrimethylammonium [Btma]+ cations, paired to tetrafluoroborate [BF4], hexafluorophosphate [PF6], dicyanamide [DCA], and bis(trifluoromethylsilfonyl)imide [Tf2N] anions, were chosen as adsorbates to investigate the influence of cation and anion type on the adsorption of ILs on the graphene surface. The adsorption process on the graphene surface (circumcoronene) was studied using M06 2X/cc pVDZ level of theory. Empirical dispersion correction (D3) was also added to the M06 2X functional to investigate the effects of dispersion on the binding energy values. The graphene···IL configurations,... 

NiO-ZnO/TiO2NTs electrodes were synthesized by the electrodeposition of Zn-Ni onto TiO2 nanotubes, dealloying in a concentrated alkaline solution and finally calcination of the resulting Zn(OH)2-Ni(OH)2/TiO2NTs at 300 C. Morphology of the electrodeposited nanostructures was studied using scanning electron microscopy (SEM) while their electrochemical characterizations were carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The SEM analysis revealed the nanoporous/cracked structures of the NiO-ZnO/TiO2NTs obtained at the electroplating time of 20 min. The EIS studies showed that nanoporous/cracked structures of... 

Polyaniline fiber (PANI) was synthesized by chemical interfacial method and doped with para toluene sulfonic acid (PTSA) through a sequential doping-dedoping-redoping process resulting in PANI-PTSA. The doped material was utilized to fabricate Vulcan-polyaniline composite of C-PANI-PTSA. Next, through reduction, Pt particles were deposited on to this composite to produce a Pt/C-PANI-PTSA electrocatalyst. To investigate the PANI-PTSA interaction with the carbon support as well as, to consider its effect upon the catalytic activity of Pt/C-PANI-PTSA, electrocatalysts with different ratios of 10, 15, 20, 25 and 30 wt% were synthesized and their activity was compared with the Pt/C (Electrochem).... 

Interactions of α-D-glucose with gold, silver, and copper metal clusters are studied theoretically at the density functional theory (CAM-B3LYP) and MP2 levels of theory, using trimer clusters as simple catalytic models for metal particles as well as investigating the effect of cluster charge by studying the interactions of cationic and anionic gold clusters with glucose. The bonding between α-D-glucose and metal clusters occurs by two major bonding factors; the anchoring of M atoms (M = Cu, Ag, and Au) to the O atoms, and the unconventional M.H-O hydrogen bond. Depending on the charge of metal clusters, each of these bonds contributes significantly to the complexation. Binding energy... 

The photoanodes of solid state dye sensitized solar cells (ss-DSCs) embedded with different contents of TiO 2 hollow spheres (HSs) were prepared and the photovoltaic performances were systematically characterized. TiO 2 hollow spheres were synthesized by a facile sacrificial templating method, grounded and added in different ratios to TiO 2 nanoparticle (NP) paste, from which composite HS/NP electrodes were fabricated. The composite photoanodes include hollow spheres of 300-700 nm with enhanced light scattering characteristics in visible range which leads to improved light absorption in conventional thin film electrodes of ss-DSC. By optimizing the amount of HSs in the paste, 40% improvement...