Sharif Digital Repository

The production of protease by Bacillus licheniformis BBRC 100053 was studied. The most appropriate medium for the growth and protease production is composed of: lactose 1%, yeast extract 0.5%, peptone 0.5%, KH2PO 4 0.1%, MgSO4.7H2O 0.02%. Enzyme production corresponded with growth and reached a maximums level (589 U/ml) during the stationary phase at 35°C, pH equivalent to 10 and with 150 rpm after 73 hours. Protease activity was highest at pH 8 and 45°C. The best carbon sources are respectively lactose and maltose and the best nitrogen source is peptone. The protease was highly active and stable from pH 7.0 to 11.0 with an optimum at pH 7-8.... 

Despite the numerous researches in Stress Corrosion Cracking (SCC) risk of austenitic stainless steels in aqueous chloride solution, no formulation or reliable method for prediction of time to failure as a result of SCC has yet been defined. In this paper, the capability of artificial neural network for estimation of the time to failure for SCC of 304 stainless steel in aqueous chloride solution together with sensitivity analysis has been expressed. The output results showed that artificial neural network can predict the time to failure for about 74% of the variance of SCC experimental data. Furthermore, the sensitivity analysis also demonstrated the effects of input parameters (Temperature,... 

This paper describes the effects of using direct and pulse current on composition and corrosion resistance of Fe-Ni-Cr alloy coatings. In both direct and pulse current electrodeposition, increasing the current density has a decreasing effect on Fe and Ni and an increasing influence on Cr. In pulse current electrodeposition, duty cycle has a greater effect than frequency on composition of the alloy coating, particularly in the range of 10-50%. In this range, by increasing the duty cycle, Ni decreases, Fe sharply increase and Cr shows an increasing trend. Following a study of the microhardness of coatings, it is determined that the microhardness increases about 1.5 times by pulse current... 

In this paper, the effect of silica nanoparticles on oil production due to the spontaneous imbibition of brine into oil-wet sandstones has been studied. The imbibed fluids were NaCl 3 wt. % solutions containing various concentrations of nanoparticles and the recovered oil for each solution was compared. The results revealed that nanoparticles yielded more oil recovery. Nanofluid was used after brine imbibition, and the oil recovery increased from 17.8% to 40% while in the case of using the same nanofluid as the first imbibed fluid the oil recovery was 53%. Also, the results indicated that the oil recovery depends on nanoparticle concentrations. © 2019, © 2019 Taylor & Francis Group, LLC  

In this study, the dynamic adsorption of asphaltene on a calcite surface is investigated. This study investigates the effect of mixed-salt brines on asphaltene adsorption. The results of this work can facilitate the understanding of the complex wettability behaviour of carbonate reservoirs. All experiments were performed in porous media, which were sand-packs filled with calcite powder, to study the influence of the type and concentration of salt on adsorption. The experiments were conducted with asphaltene concentration of 500 mg/L for brines of NaCl, Na2SO4, and a mixture of the two at various ionic strengths. In addition, two tests were performed with an asphaltene concentration of 2000... 

Carbonated brine (CB) injection, known as one of the effective enhanced oil recovery processes, is highly dependent on the reservoir conditions (i.e. temperature and pressure) as well as the type of dissolved salt in aqueous solution. This study is aimed to investigate the influential parameters on the swelling of crude oil as the most important mechanism during CB injection. The swelling of crude oil in the presence of different CB solutions consisted of different salts such as KCl, NaCl, CaCl2 and MgCl2 with constant concentration of 15,000 ppm is studied using a high-pressure, high-temperature visual cell which measures the volume of drop using image processing software based on... 

This study aims to elucidate the impact of salinity on the interactions governing the adsorption of polar aromatic oil compounds onto calcite. To this end, molecular dynamics simulations were employed to assess adsorption of a model polar organic molecule (deprotonated benzoic acid, benzoate) on the calcite surface in NaCl brines of different concentration levels, namely, deionized water (DW), low-salinity water (LS, 5000 ppm), and sea water (SW; 45,000 ppm). Calcite was found to be completely covered by several well-ordered water layers. The top hydration layer is very compact and prevents direct adsorption of benzoates onto the substrate. Instead, Na+ ions form a distinct positively... 

Background: SApeptides have growing applications in tissue engineering and regenerative medicine. The application of SApeptide-based hydrogels depends strongly on their viscoelastic properties. Optimizing the properties is of importance in tuning the characteristics of the hydrogels for a variety of applications. Methods: In this study, we employed statistical modeling, conducted with the RSM and particle tracking microrheology, to investigate the effects of self-assembling SPG-178 peptide and added NaCl salt concentrations and milieu type (DI water or blood serum) on the viscoelastic properties of SPG-178 hydrogels. A central composite RSM model was employed for finding the optimum value of... 

A straightforward three-stage method was applied to fabricate a super-hydrophobic mixed-matrix nanofiber membrane using the electrospinning method for desalination purpose. First, a hydrothermal technique was applied to synthesize a super-hydrophobic nano-sheet, called octadecylamine-reduced graphene oxide (ODA-rGO) with a water contact angle of 162°, which was then added to PVDF-HFP dope solution. After, 0.005 wt% LiCl was added to the dope solution to decrease the mean pore size by increasing solution conductivity. Moreover, some membranes were hot-pressed to improve liquid entry pressure (LEP). Eventually, a top-quality nanofiber membrane was synthesized using 0.1 wt% ODA-rGO and 0.005... 

An experimental and modeling study on the feasibility of the Scheibel extraction column is presented for heavy metal separation from chloride solution. In continuous experiments, the chemical reaction systems are considered zinc extraction by D2EHPA and stripping from the loaded organic phase by chloride solutions. The experimental results represent that the best extraction and stripping rates in the agitation speed of 155 rpm and the rate of inlet phases of 28 L/h are equal to 99.56% and 98.11%, respectively. The mass transfer modeling by applying the forward mixing is interpreted for solvent extraction systems in this column with the fitting technique. The calculated results from... 

Hereby a simple, low-cost and scalable route is being presented for preparation of binder-free electrodes of reduced graphene oxide (RGO) on Ni foam (Ni/Gr). In this regard, the Ni foams are dipped in graphene oxide (GO) slurry. Next, the GO loaded Ni foams are kept in a freeze dryer for 24 h and heated up to 800 °C in an inert atmosphere. In this approach, the amount of active materials can be easily optimized for capacitive deionization (CDI). The characterization of Ni/Gr electrodes revealed a 3D porous assembly of RGO on Ni substrate which is helpful for the fast ion diffusion and rapid electron transport. The electrochemical performance of the prepared electrodes is investigated in both... 

In this study, magnesium boro/carbothermal reduction of zirconium silicate (ZrSiO4) was employed to synthesize zirconium-based composite nanopowders of ZrB2–SiC, ZrB2–ZrC–SiC, ZrC–SiC, and ZrC. For this aim, three different temperatures of 1200 °C, 1300 °C, and 1450 °C were selected as the supposed temperatures for synthesis. Elemental Mg and NaCl were also selected to assist reduction process. In addition, effects of different C/Zr ratios as well as using elemental boron and B4C as two different boron sources were investigated on the final produced phases. Subsequently, XRD and SEM/EDS analyses were carried out to elaborate microstructure and phase studies. Finally, STA carried out up to... 

While energy consumption is increasing worldwide due to population growth, the fossil fuels are unstable and exhaustible resources for establishing sustainable life. Using biodegradable compounds present in the wastewater produced in industrial process as a renewable source is an enchanting approach followed by scientists for maintaining a sustainable energy production to vanquish this problem for ulterior generations. In this research, bioelectricity generation with whey degradation was investigated in a two-chamber microbial fuel cell with humic acid as anodic electron mediator and a cathode compartment including combinational electron acceptor. Escherichia coli was able to use the... 

Synthesis of novel natural-based superabsorbents with improved properties is of prime importance in many applications. In this article we report an efficient synthesis of new polysaccharide-based superabsorbent hybrid composing carrageenan, acrylic acid, sodium acrylate, and 2-hydroxyethyl acrylate through homogenous solution polymerization process. Infrared spectroscopy and thermogravimetric analysis (TGA) were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy (SEM). To deeper studies on the structure-property relation in SAP hydrogels, three hydrogels with different acrylic acid/2-hydroxyethyl... 

The synthesis of functionalized benzothiadiazine 1,1-dioxide derivatives was achieved through a novel three-component intramolecular C–H activation reaction of trichloroacetonitrile, benzenesulfonyl chloride, and various primary amines. This reaction was performed in the presence of catalytic copper(I) and L-proline as the ligand in tetrahydrofuran at room temperature. © 2018 Elsevier Ltd  

The Persian Liquorice was introduced as a sustainable corrosion inhibitor with excellent inhibition action for mild steel in sodium chloride solution. Persian Liquorice is a root of Glycyrrhiza glabra including many active compounds like Glycyrrhizin (GL), 18β- Glycyrrhetinic acid (GA), Liquritigenin (LTG), Licochalcone A (LCA), Licochalcone E (LCE), and Glabridin (GLD). The Fourier transform infrared (FT-IR) spectroscopy was utilized to track various active components exist in the Persian Liquorice extract. Electrochemical impedance spectroscopy, potentiodynamic polarization and electrochemical current noise measurements were conducted to investigate the corrosion inhibition role of various... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

Background: Numerous studies have described the neuroprotective effect of lithium in spinal cord injury in addition to its ameliorative impact on pain sensation. In the present study, we aim to examine the efficacy of 85 mg/kg as well as 50 mg/kg dosage of the lithium chloride (LiCl) through oral consumption in spinal cord injured rats and their effect on gene expression of three candidate genes, corresponding to the hyper-sensitization. Methods: Adult Wistar (male) rats were divided into four experimental groups: control; oral administration of LiCl with 85 mg/kg and 50 mg/kg dosage; and 10 % sucrose receiver as the vehicle. BBB and heat plantar tests were performed weekly throughout four... 

We introduce highly antifouling Polymer-Nanoparticle-Nanoparticle/Polymer (PNNP) hybrid membranes as multi-functional materials for versatile purification of wastewater. Nitrogen-rich polyethylenimine (PEI)-functionalized halloysite nanotube (HNT-SiO2-PEI) nanoparticles were developed and embedded in polyvinyl chloride (PVC) membranes for protein and dye filtration. Bulk and surface characteristics of the resulting HNT-SiO2-PEI nanocomposites were determined using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Moreover, microstructure and...