Sharif Digital Repository

The treatment facility of Albourz Industrial City was established in 1999 at the southeast of Albourz Mountain with an area of 200,000 square meters. Currently, 40,000 cubic meters of industrial wastes are treated daily utilizing biological method of activated sludge up to the second phase without chlorination in this treatment facility. Then, the discharged wastes are directed toward the lower agricultural lands. The environmental status of the region was investigated by testing the impact of wastewater and agricultural products in four tries. In two tries, the levels of COD and BOD were higher than the environmental standards, but there was no trace of heavy metal contamination in any of... 

Designing efficient and inexpensive catalysts toward the oxygen evolution reaction (OER) is vital for achieving sustainable and green hydrogen fuel production through water electrolysis. Herein, we have synthesized several bi- and trimetallic metal–organic frameworks (MOFs) composed of Co, Ni, and Mn metals and benzene-1,3,5-tricarboxylic acid linker. The MOFs were prepared via a simple hydrothermal method, and their electrocatalytic performances in alkaline OER were investigated. A battery of analytical techniques was employed to characterize the as-synthesized materials, including field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM),... 

The simultaneous control of the molecular weight, separation, and purification of polyvinyl acetate was achieved using a cobalt-mediated radical polymerization (CMRP) in a packed column with silica gel particles (PC-CMRP). The controlled radical polymerization of VAc in the packed columns was evaluated from the linear time dependence of Ln[M]0/[M], linear increase of molecular weight with the increase in conversion, and narrow molecular weight distribution. PC-CMRP method was used to produce high-purity polymers with controlled molecular weight and narrow molecular weight distribution without requiring additional purification steps. The high ability of silica gel particles to adsorb free... 

Monometallic and bimetallic supported metal oxides catalysts on γ-alumina were prepared by heterogeneous deposition-precipitation. The γ-alumina used as a support was synthesized by the sol-gel and the co-precipitation methods. Supports and catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The performance of the prepared catalysts was studied for total oxidation of toluene in air at different relative humidity and oxidation temperatures. Efficiency of bimetallic catalysts for deep oxidation of toluene was... 

Multi-walled carbon nanotubes (MWCNTs) were immobilised with cobalt nanoparticles and analyzed by transmission electron microscopy. This modification procedure substantially improved colloidal dispersion of the immobilised MWCNTs in water and organic solvents, yielding uniform and stable thin films for modification of the glassy carbon electrode surface. The modified electrode showed an efficient catalytic role for the electrochemical oxidation of thioridazine (TR), leading to remarkable decrease in its oxidation overpotential of approximately 100 mV and enhancement of the kinetics of the electrode reaction, which can be confirmed by increasing in the peak current and sharpness of the peak.... 

We prepared copper-carbon nanocomposite films by co-deposition of RF-Sputtering and RF-PECVD methods at room temperature. These films contain different copper concentration and different size of copper nanoparticles. The copper content of these films was obtained from Rutherford Back Scattering (RBS) analyze. We studied electrical resistivity of samples versus copper content. A metal-nonmetal transition was observed by decreasing of copper content in these films. The electrical conductivity of dielectric and metallic samples was explained by tunneling and percolation models respectively. In the percolation threshold conduction results from two mechanisms: percolation and tunneling. In the... 

Titanium(IV) tetraisopropoxide was employed as a metal oxide sol-gel precursor to prepare ceramic composite nanofibers by the electrospinning system. To facilitate this process and obtain the desired nanofibers with higher aspect ratios and surface area, poly(vinylpyrrolidone) was added to the sol of titania. Four ceramic nanofibers sheets based on titania were prepared while each sheet contained different transition metals such as Fe-Mn, Fe-Ni, Fe-Co, and Fe-Mn-Co-Ni. The scanning electron microscope images showed good homogeneity for all the prepared ceramic composites with a diameter range of 100-250 nm. The sorption efficiency was investigated by a micro-solid-phase extraction setup in... 

Cobalt is the most common binder in cemented carbides industry. However, there are some interests in use of alternatives. The similarity in properties has made nickel the first choice. In the present work, the effect of initial composition on modern hardmetals containing transition metal carbides/carbonitrides that are called "cemented carbonitrides" with nickel as binder was investigated. Change in quantity of additive carbides and tungsten to carbon (C/W) weight ratio through applying metallic tungsten powder in primary powder mixture had some effects on final hardness, transverse rupture strength, and microstructure of studied alloys. Addition of vanadium carbide not more than 0.2 wt.%,... 

Functionally graded cemented carbonitrides (FGCCs) are applied in cutting tools industry. Indexable inserts made from mentioned alloys have superior cutting performance and tool life thanks the formation of a surface modified layer with enhanced properties as well as crater wear resistance. Cemented carbonitrides are made of hard carbide/nitride/carbonitride particles that have been embedded in a metallic binder. Excellent wetting ability of tungsten carbide with cobalt has made this metal the first choice as binder. However, cobalt has high cost and environmental pollution impacts. Substitution of cobalt with other metals has always been figured out. Some other metals that have been used as... 

Ni-Co/SiC nanocomposite coatings were electrodeposited in a modified watt type of Ni-Co bath containing 20 nm SiC particles to be codeposited. Potentiodynamic polarization tests were conducted to study the effect of the SiC particulates on the electrodeposition of Ni and Co. Scanning electron microscopy was used to assess the morphology of the Ni-Co alloy and Ni-Co/SiC nanocomposite coatings. The distribution of the particulates in the matrix was considered by means of transmission electron microscopy. Applying nanomechanical testing instruments coupled to atomic force microscopy, mechanical properties of the alloy and composite coatings were studied and compared. The presence of 11 vol.%... 

A field sampling campaign was implemented to evaluate the variation in air pollutants levels near a highway in Tehran, Iran (Hemmat highway). The field measurements were used to estimate road link-based emission factors for average vehicle fleet. These factors were compared with results of an in tunnel measurement campaign (in Resalat tunnel). Roadside and in-tunnel measurements of carbon monoxide (CO) and size-fractionated particulate matter (PM) were conducted during the field campaign. The concentration gradient diagrams showed exponential decay, which represented a substantial decay, more than 50-80%, in air pollutants level in a distance between 100 and 150meters (m) of the highway. The... 

Copper and cobalt oxides supported on almond shell derived activated carbon (AC) with different loadings were synthesized by sequential and co-deposition-precipitation methods leading to Cu(shell)/Co(core)/AC, Co(shell)/Cu(core)/AC and Cu-Co(mixed)/AC catalysts that were subsequently used for catalytic oxidation of gaseous mixtures of toluene and cyclohexane in air in a tubular flow reactor. The catalysts and the support were characterized by Boehm test, Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy... 

In this study, graphene materials have been synthesized with solid camphor (C10H16O) and methane gas as carbon precursors using atmospheric pressure chemical vapor deposition (CVD) technique at a temperature range of 900-1000 °C for a period of 45 min over copper nanoparticles. Influence of the carbon precursors upon the shape, number of layers and yield of the synthesized graphene samples has been investigated. In this venue, the compounds synthesized were functionalized with oxygen groups and impregnated by cobalt and molybdenum active phases. Moreover, the total metal loading and Co/Mo weight ratio of prepared compounds were adjusted to their industrial nominal values of 10% and 0.33,... 

(Lanthanum, Cerium)(Iron, Manganese, Cobalt, Palladium)(Oxygen)3- Perovskite catalyst was prepared by the citrate route and deposited on ceramic monoliths via dip coating procedure. The catalyst was applied on a car with XU7 motors and the amount of emission was monitored with vehicle emission test systems in Sapco company. The results were compared with the imported catalyst with noble metals such as palladium, platinum and rhodium by Iran Khodro company based on the Euro III standards. The catalysts were characterized by specific surface area measurements, scanning electron microscopy, X-ray diffraction, line scan and map. In the results, obtained in the home made sample, the amount of... 

The MgO-supported Fe-Co-Mn catalysts, prepared using co-precipitation procedure, were tested for production of light olefins via CO hydrogenation reaction. The effect of a range of drying conditions including drying temperature and drying time on the structure and catalytic performance of Fe-Co-Mn/MgO catalyst for Fischer-Tropsch synthesis was investigated in a fixed bed micro-reactor under the same operational conditions of T = 350 °C, P = 1 bar, H2/CO = 2/1, and GHSV = 4500 h-1. It was found that the catalyst dried at 120 °C for 16 h has shown the best catalytic performance for CO hydrogenation. Furthermore, the effect of drying conditions on different surface reaction rates was also... 

Composites of unsaturated polyester containing 5 wt% nanoclay and different amounts of lead monoxide particles (0, 10, 20, and 30 wt%) were prepared. XRD patterns showed the exfoliation of nanoclay layers in the polymer. Morphological properties of the composites were studied using SEM micrographs. The prepared composites were investigated for their thermal resistance and mechanical properties using thermogravimetric analysis and tensile testing method, respectively. Addition of lead monoxide to the polymer worsened its thermal resistance and tensile properties, whereas the observed negative effects could be moderated by the clay nanoparticle. Gamma attenuation performance of the composites... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

The motivation of this study is development of a technique to construct energy spectrum of higher price/high resolution detectors (e.g. NaI (Tl)) using spectrum of lower price/low resolution detectors (e.g. NE102). Since there is no explicit mathematical model between these type of detectors (i.e. organic and inorganic scintillator detectors), it is necessary to utilize model-free methods. Construction of mapping function to generate spectrum of inorganic scintillator using spectrum of organic scintillator can be done by supervised model-free methods. Different supervised learning methods including localized neural networks, statistical methods, feed-forward neural networks, and conditional... 

Co-precipitation of CoCl2.6H2O with graphene oxide (GO) and heating at 400°C for 4 h under hydrogen resulted in the construction of cobalt/ reduced GO (Co/rGO) nanocomposite utilisable in magnetic thermal therapy. Field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, vibrating sample magnetometry, thermogravimetric analysis/derivative thermogravimetry, and X-ray diffraction methods characterised the samples. Time-temperature curves of the samples containing 30, 50, 70, and 100 µg ml−1 Co/rGO nanoparticles (NPs) suspended in phosphate-buffered saline were determined at different specific heating rates. Magnetic-field response of...